At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: My panel light that shows the fuel, Mph is out and I...
It is probaly bulbs in behind the dash cluster burnt out,will need to reach behind and replace if you cant then dash cluster amy have to be removed to change bulbs.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I don't have a diagram for a 91, but a 95 model has three fuses - the big one ( 100amp or more) a 10amp fuse for the charge light and a 7.5amp for the third circuit. There is no relay in the circuit. The normal voltage should be 12-12.5 with the engine off and 14.5 with the engine running at 1500 RPM.
check the fuses for the fuel pump then if its good check the wiring for the system.there is also a pump relay in the system to check,if there is no power to the tank unit then changing the pump is not going to fix the problem.
its possible the headlight relay is bad it should be labeled on the fuse / relay box you can swap it out with a different relay( stop light relay ) in the box just to see if that works. Just make sure you don't try and use the fuel pump relay or your vehicle wont start.
The power flow for the brake lights goes like this: Fuse ->Brake switch -> Turn signal switch -> Rear lights. The only difference is, if you have a 3rd brake light in your rear window, that gets its power directly from the brake switch. It does not go thru the signal switch first. So, if you are having a brake light problem, and your fuses are good, check the 3rd light in the rear window, if it lights up (assuming the bulbs are good, no one ever changes them), then the problem is most likely in the turn signal switch, hope this helps!
Am not sure whether you have the Hyundai Owners Manual. If you don't I find it very worthwhile. Section 6, the "do it yourself section" lists page 6-34 and 6-35 for fuse descriptions. Also on the cover of the fuse box in the car under the ash tray left of the driver is a pictogram, but in any case according to my manual radio and clock are both listed on the "audio" and is in the inner panel, the 10A at the top right(next to the spare). Don't know about your roof light - hope you don't take offense but assume you checked the switch just didn't get set wrong, but if it isn't solved by fixing that one, the manual lists RoomLP controlling the inside lights, which is in the bottom (shorter) row on the far right. Of course, this might not help but if it does I could possibly scan my owner's manual page and email it if you can't find one.
do you have remote start on that truck? if you do, it has a hood safety switch that will keep it from starting if hood is open. That hood switch is quite easily identifyable. Look for it on the drivers side, either close to the firewall or right at the front of the fuse box.itsa worth taking a look
Check your fusible links (wires that act like a fuse). The fusible links are located on the battery post on the starter, and some are located on the positive battery cable.
×