Question about 2004 Kia Sedona

1 Answer

Cannot locate the spark plugs in the 2004 Kia Sedona engine

Trying to change the spark plugs but cannot find them in the engine, need a diagram or instructions on where to look.

Posted by on

  • Anonymous Mar 18, 2014

    Whistling when engine on

  • Anonymous Mar 22, 2014

    i'll try to change the starter, but i can't locate where it is, so please the picture of a starter located

×

1 Answer

First you have to take off the black plastic cover then you will see the 3 on the front of the engine the other 3 are under the manifold, you have to remove the manifold in order to reach them, I suggest you take the car to a mechanic for this work.

Posted on Sep 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do I need to buy to do a tune up and oil change on my 2004 kia Sedona ex?


Oil, Oil filter, and spark plugs. Check the air filter for the engine, it is likely still ok, not changed in most cases until 36,000 miles unless you live in a dusty area.

Apr 29, 2016 | 2004 Kia Sedona EX

1 Answer

We r trying to change the spark plugs in a 2002 kia sedona. and we r trying to take the intake manifold off but wont come off. we have loosened every bolt. any suggestions? thanks..


According to what I can find, you don't need to take the intake manifold off:
3.5L Engine

  1. Disconnect the negative battery cable.
    WARNING When disconnecting the cable, only pull on the plug cable boot, never on the wire itself!
  2. Detach the spark plug cable from the spark plug.
  3. Use spark plug wrench to remove the spark plug(s) from the cylinder head.
    WARNING Do not let any dirt or debris get into the engine through the spark plugs holes while when are removed.

To install:
  1. Install the spark plug and tighten to 15-22 ft. lbs. (20-30 Nm). Do not over-tighten the spark plug.
  2. Attach the spark plug wire(s) to the spark plug(s).
  3. Connect the negative battery cable.

Aug 20, 2011 | 2002 Kia Sedona

2 Answers

I NEED A FIRING ORDER DIAGRAM FOR A 3.5 KIA SEDONA I HAVE TROUBLE CODES 302 AND 306 AFTER COILS,PLUGS AND WIRES WERE REPLACED


Firing order 1.2.3.4.5.6
Looking at engine , number 1 cyl left front,number 2 left middle,3 left back
Number 4 right front,5 middle right ,6 back right
Fault codes indicate missfire cylinder 2 and 6

Jul 27, 2010 | 2004 Kia Sedona

1 Answer

How to change spark plugs on 2005 kia sedona


See my "Tips and Tricks" for instructions for changing the spark plugs in a Kia Sedona.

Jun 11, 2010 | 2004 Kia Sedona

1 Answer

Changing spark plugs in a 2004 kia sedona the back plug how to get at them


You'll need to remove the upper intake and throttle body. Involves unbolting and unplugging alot of things.

Mar 14, 2010 | 2004 Kia Sedona

1 Answer

The factory radio plug was cut out. i need a 2004 kia sedona radio wiring diagram. please.


heres the radio wiring diagram for your 2004 Kia Sedona. hope this helps you. good luck.8c54264.gif

Mar 08, 2010 | 2004 Kia Sedona

2 Answers

Where is the input speed sensor on KIA sedona 2005


on transmission has 2 wires at right side of trans .by axel

Nov 24, 2009 | 2004 Kia Sedona

1 Answer

Change spark plug wires on 04 kia sedona


REMOVAL OF THE PLUGS:

Do not attempt any maintenance on spark plug if engine is hot. 
1. Disconnect negative battery terminal. 
2. Carefully remove high-tension leads. 
3. Use compressed air to blow any dirt or debris from around spark plug hole. 
4. Check that spark plug fits squarely in spark plug socket and remove spark plug.

Raise a vehicle and install SST(OK552 131 001) in order to replace cylinder 2, 4, 6 spark plug. 

INSTALLATION:

1. Install spark plug into cylinder head.

Tightening torque : 18~22lb-ft (25~30N·m, 2.5~3.0kg-m)

2. Reconnect high-tension leads. 
3. Reconnect negative battery cable. 

Hope this helps and simple to understand. Good luck

Apr 20, 2009 | 2004 Kia Sedona

3 Answers

Replacing thermostat 2004 Kia sedona


ON DRIVERS SIDE OF ENGINE TO THE REAR
JUST FOLLOW THE BLACK RUBBER HOSE TOWARDS THE THERMOSTAT HOUSING

Dec 18, 2008 | 2004 Kia Sedona

Not finding what you are looking for?
2004 Kia Sedona Logo

568 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...