Question about 2002 Toyota Sequoia

1 Answer

Do0r handle broken on passenger side 2002 toyota sequioa

I have removed the two screw out, one on the handle and one on the right side of it. but still have trouble getting the door out and the handle to loosen up. it seems to be stuck by the handle part. What else am I missing to remove? or There is a hidden clip that I might not know?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

You need to remove the large yellow clip that hold the handle to the rod that goes down to the door latch assembly. Also, if the key lock is in the handle, you need to remove the clip that hooks the key cylinder to the door latch assembly.

Posted on Sep 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Inside door handle 2002 concorde


You will most likely have to replace the inside handle, there is a "L" hook & clip inside the door panel. It's possible that it just popped out, but most likely the clip has broken. you'll have to remove the screws & crutons from the door panel to access the handle, you can find a replacement handle from the Chrysler dealer, or a used part yard. Happy handling B-)

Apr 07, 2012 | 2002 Chrysler Concorde

1 Answer

How to open the tailgate if handle or cable is broken on 2003 sequoia


I had the same problem with my 02 Sequoia. To get the tailgate open and replace the broken handle you will have to remove the tailgate's panel cover.

The panel is affixed to the tailgate with about six to eight plastic stays on the back side of the panel.

You will need a "L"-shaped tool (The tool looks like a screw driver with its tip bent one-to-two inches.) that can be inserted under the panel's edge. Start @ the right, or left bottom corner.

After you pull the panel's second plastic stay away from the tailgate you will be able to use your hand to pull the rest of the stays away from the tailgate then push up on the panel to remove it.

After the panel is removed you will be able to see where the cable feeds into the broken handle. Use a pair of needle-nose pliers to pull the cable and open the tailgate. Toyota charges $100.00 for a new handle.

Hope this helps and is not to confusing.

Oct 09, 2011 | 2002 Toyota Sequoia

1 Answer

Cannot lock passenger side door with key or centralize locking.


If you cannot lock the door with the remove or the key, then it sounds like the linkage is broken or has become dislodged. You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Aug 16, 2009 | 2002 Toyota Camry

1 Answer

How do I replace a side view mirror, passenger side on a 2001 Toyota Avalon XLS?


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then the cover for the mirror housing should pop off and you just need to remove the bolts holding the mirror on

Aug 16, 2009 | 2002 Toyota Camry

1 Answer

Broken rear hatch door handle on Toyota Sequioa


It sounds like the handle has become disconnected from the mechanism. You will have to remove the inner door panel and reattch. It is not a complicated or difficult job but if you get a professional it could cost upwards of $100.

Jul 16, 2009 | 2006 Toyota Sequoia

1 Answer

Remove passenger side mirror. Ineed to replace a broken passenger side mirror. Do I need to remove the entire door panel to access the scriews holding the mirror and to access to electrical connection?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jun 11, 2009 | 2007 Toyota 4Runner

1 Answer

Replace 2007 Toyota Rav4 super sport passenger side door mirror


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Mar 19, 2009 | 2007 Toyota RAV4

1 Answer

Remove door trim to install side mirror.


ft door panel has 2 round covers for 2 screws, arm rest has 2 0r 3 screws(ft mid and rear of rest) 2 push in clips on right side of panel, 1 cover for screw middle about 6 inches from bottom. tricky part is door handle bezel. where the inner handle pivots, insert small screwdriver and pry up,it should pop out and do the same for the bottom. p.s. be very cautious with regulator when installing it to motor.if cables come unspooled,your screwed.

Jan 09, 2009 | 1994 Toyota Camry

1 Answer

Replace passenger mirror


  1. Remove the door inside handle as follows:
    1. Remove the screw and slide the handle forward.
    2. Disconnect the handle from the control link and remove the handle.
  2. Remove the door trim as follows:
    1. Remove the 2 caps and 2 screws.
    2. Using a screwdriver, remove the door trim upward then disconnect the connectors.
    3. Using a screwdriver, pry the forward of armrest panel and remove the panel.
    4. Remove the 2 screws and tweeter speaker.
    5. Disconnect the connector, remove the 5 screws and speaker.
    6. Disconnect the wire harness and remove the 2 grommets and service hole cover.
  3. Remove the cover and disconnect the power mirror connector.
  4. Remove the 3 nuts and outer rear view mirror.
To install:
  1. Installation is the reverse of the removal procedure.
  2. Tighten the mirror nuts to 8 Nm (71 inch lbs.).

Good luck...

Nov 11, 2008 | 2002 Toyota Tacoma

2 Answers

How do I replace broken 2002 buick century passenger side mirror?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Oct 09, 2008 | 2002 Buick Century

Not finding what you are looking for?
2002 Toyota Sequoia Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...