Question about Hyundai Accent

2 Answers

2000 Hyundai Accent GL check engine light on. trouble codes are: PP1529, P0713, P0760, P0760, P0755.

Posted by on

  • jparker32547 Jan 02, 2009

    i have a 2002 hyundai accent with codes p1529 and p0734 it wont changes gears rite has no hi gear and no reverse

  • yadayada
    yadayada May 11, 2010

    These are all transmission trouble codes, has the trans been worked on of late? Does it shift OK? If not I would either suspect a transmission electrical connector problem or a bad computer.

×

2 Answers

I just replaced the timing belt, and asked the garage to look at the transmission for me because i thought i was experiencing some subtle shifting problems. they told me the transmission looked fine, but i needed a new filter and fluid. the engine light didnt turn on til a couple weeks later tho. does this sound like a new filter and fluid would fix this problem?

Posted on Sep 09, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Temp sensor in the transmission. You can replace it yourself in about an hour. Take the time to replace the filter and you'll need an additive for replacement fluid as the transmission uses 'SP3', which you can only get at the dealer.

Posted on Sep 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

These error code's were read: p0700, p0765, p0760, p0755, p0743. How can we fix this? Can it be the harness connection?


How To Fix Transmission A4CF2 Shift Problems / Check ...

? 18:46
https://www.youtube.com/watch?v=URUT3t8uUCw
Oct 27, 2014 - Uploaded by ProProjects
Thanks to ProProjects P0700 P0743 Torque Converter Clutch Circuit Electrical. ... P0765 - Shift Control Solenoid Valve D (Overdrive Solenoid) ... I have only two codes P0760 P0755 but my car is a mitsubishi galant 2.4 liters.

PDF]Technical Service Bulletin - RevBase

www.revbase.com/BBBMotor/Tsb//DownloadPdf?id=133873
Diagnostic Trouble Codes P0740, P0741, P0742, P0743, P0746, P0748, P0750,.P0755, P0760, P0765 or P0770 set ... P0700 - TCM MIL request signal.

Nov 07, 2015 | Cars & Trucks

2 Answers

What does codes p1529, p0755 and p1529 mean? I am sure it is something to do with transmission.


P0755 Shift Solenoid B Malfunction
cam not find the P1529 you can call auto zone maybe they can help

Jul 10, 2014 | 2004 Hyundai Elantra

1 Answer

P0713


I found that my gas cap wasn't sealing when I tighten it so I put WD-40 on and light stayed off so I oil it down every now and then

Mar 19, 2013 | 2001 Hyundai Accent

1 Answer

2000 intrepid, 42LE electronic 4-speed autotransaxle. O/D preasure switch circuit malfunction, Code: p1781; p0760; p0755


did you also find out that P0755 & 760 were shift solenoids B & C respectively? probably looking at replacing those. Chiltons are no help when it comes to trans work. Had a '99 LH car with a 3.2L also. Maybe look for a Service manual online, you know the ones for dealers.

Oct 28, 2012 | 2000 Dodge Intrepid

1 Answer

2003 hyundai accent dtc p0760


P0760 Shift Solenoid C Malfunction --Possible causes- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid C valve
- Shift solenoid C valve harness or connectors
- Shift solenoid C valve circuit is open or shorted good-day !

Dec 13, 2011 | 2003 Hyundai Accent

1 Answer

I have a 2001 hyundai santa fe recently the car has stalled when shifting into gears, the engine light is on and the codes p0755 p0760 p0765, from my research on this site I was told that this could be an...


P0755 - Underdrive Solenoid Valve Circuit - Open or Short(GND
P0765 - Overdrive Solenoid Valve Circuit - Open or Short(GND
P0760 - Second Solenoid Valve Circuit - Open or Short(GND

Tell me, did the dealership inform you that your vehicle did NOT have an electrical problem? If they did, they lied!

Each of these trouble codes IDENTIFY an ELECTRICAL issue, whether it's in the wiring harness (outside or inside the transmission). Let's suppose the solenoids are 'ACTUALLY' bad, shorted/open - OK.... THEY CAN BE REPLACED!

Provided you have told me "all they did was pull up the codes and tell me I need a new transmission for $2175.00" is true - THEY LIED!

You can look up the repair procedure yourself on www.hmaservice.com and register your vehicle by VIN #. You then have access to shop manuals, service bulletins, wiring diagrams, etc. you can even type in the codes (Under Detail Search) and select the "Inspection/Repair" procedures and see what THEY DIDN'T do/tell you.

Mar 23, 2011 | Hyundai Santa Fe Cars & Trucks

2 Answers

2001 hyundai santa fe transmission went into neutral mode,and won't engage gears until turning off car for few minutes,and driven about 100 yards continues.Came up with diagnostic codes...


Hello, all your codes are related to transmission shift solenoid circuit condtion eg: Transmission > Automatic Transaxle > P0750 Low and Reverse Solenoid Valve Circuit - Open or Short(GND). Automatic Transaxle > P0755 Underdrive Solenoid Valve Circuit - Open or Short(GND). Automatic Transaxle > P0760 Second Solenoid Valve Circuit - Open or Short(GND). Automatic Transaxle > P0765 Overdrive Solenoid Valve Circuit - Open or Short(GND). Wether your vehicle is equipped with a 4 cylinder or v6 ,all the codes are for either engine models. Check your main wire harness that plugs into the top of the transmission and verify,that a good connection is present. if all looks ok and the vehicle still exibits the same symptoms. The problem may also be in the ECM/TCM control module itself. A Hyundai dealer would have the proper scan tool and tester to verify and perform actuation tests on the shift solendoids themselves to make sure they are working correctly. This does not mean that the transmission itself has failed. You basically have an open circuit somewhere that the solenoids are not getting a good ground. Hope this helps.

Jan 31, 2011 | Hyundai Santa Fe Cars & Trucks

1 Answer

I have a 2000 Hyundai Accent, the check engine light came on after getting gas. The car is running fine.


More then likely it's going to be an evap code, check your gas cap make sure it's on right, also go by any auto parts or autozone where they can pull codes for free, and get back with us here at FixYa so we can help you diag. your trouble code.

Jun 29, 2010 | 2000 Hyundai Accent

2 Answers

Frequent TCC message Lincoln continental 1999


go to autozone and get the codes. they will test for free.

Message Center Display
The following messages may be displayed on the message center.
This message center will display CHECK TRANSMISSION if the following codes have been set.


DTC Codes Possible Faults P1746, P1747, P1760 Electronic pressure control solenoid P0743, P1767 Torque converter clutch circuit P0750, P0755, P0760 Shift solenoid circuit P1714, P1715, P1716 ISIG P0731, P0732, P0733, P0734 SFT error P0741, P1742, P1743, P1744 Torque converter clutch error P1783 Over temperature P1700 NEV error P0712, P0713, P0710,
P1710, P1713, P1718 Transmission fluid
temperature error P0705, P0708, P1704 Transmission range sensor error P0500, P0503 Vehicle speed sensor error P0715 Turbine shaft speed error
NOTE: For codes. For additional information, refer to Diagnostic Trouble Code Chart.


Sep 25, 2009 | 1999 Lincoln Continental

1 Answer

Check engine light


The trouble code P1128 is for a faulty mass air flow sensor or MAP. This is a common problem with 1999-2000 Accents. There is air leakage within the unit and/or the hot wire in the unit is badly contaminated. A bad MAP will cause the vehicle to bog and loose power.

Apr 01, 2009 | 1999 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...