Question about 1999 Jeep Cherokee

1 Answer

1999 JEEP CHEROKEE BRAKES

Hi,

I need to get the schematics of the whole brake system - is this available on line for free?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 475 Answers

What kind of problem do you have?
You can always Google-Jeep brake system schematic.

Posted on Oct 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brakes ! for 1999 jeep Cherokee repair. is there master cylinder and a brake! cylinder? they want over $500.00 just for those two items.


The master cylinder is under the hood, driver side on the firewall. It's where the brake fluid goes. The brake cylinder is a misnomer. Brake cylinder is part if a drum brake system which you may have on the rear but the front uses brake calipers. Both do the same basic function. The master cylinder pressurized the brake lines. Then this causes the caliper or brake cylinder to press the brake pads against the discs (front) or drum (rear). Some vehicles use discs and calipers at all 4 wheels.

Oct 21, 2016 | 1999 Jeep Cherokee

2 Answers

1994 Jeep Grand Cherokee brake pedal goes all the way to the floor. Recently replaced calipers and master cylinder and bled the whole system. Brake pedal goes all the way to the floor when first pushed...


Not bleed properly
or you have a rusted out line (leak)

There is NO Procedure-- that when driving a
vehicle or bleeding brakes,do you ever pump them

Dec 03, 2014 | 1994 Jeep Grand Cherokee

1 Answer

I have a 1999 Jeep Cherokee 4.0L 4WD. Recently I replaced the rear brakes (drums, shoes, hardware kit, automatic self adjusting kit) on both sides. The brakes worked fine for a little while (probably


what are the symptoms.? there are over 20. or so.
  1. leaking DOT 3/4 fluid. , at every inch of the way, in system.
  2. stopping distance increased.
  3. pulling (steering changes as you brake)
  4. locked up brakes, 1 or any of all 4.
  5. noise
  6. ABS OR traction control (stability) lamps glowing
  7. ABS failure. of any kind.
  8. DTC errors, from the scan tool related to brakes.
  9. no hard pedal,
  10. pedal drifts to the floor.
  11. spongy brakes.
  12. pedal play is wrong , or height.
  13. power assist part of brakes , inactive.
  14. DoT 3/4 fluid levels keep dropping.
  15. rusty brake lines
  16. brake hoses cracking.
  17. im sure there are more, ....

Oct 24, 2014 | 1999 Jeep Cherokee

1 Answer

1999 Grand Cherokee at night when headlights are on the right brake light goes off when you apply the brakes


The 1999 Jeep Gran Cherokee has standard all-wheel antilock brakes. The new braking system has electronic brake distribution capability, which makes for a quieter, less pulsing and more balanced braking experience. Possessing the largest brake rotors in the sport-utility segment, the Grand Cherokee meets or exceeds requirements for passenger vehicles, which are stricter than those for light trucks. -----------------------------------------------------------------------------------------
Original Launch X431 Master

Mar 09, 2013 | 2004 Jeep Grand Cherokee

1 Answer

Hi i just replaced a brake booster in 1999 jeep grand cherokee because of vacuum leak .but now i ll have to push down to brake .how to make it little hard ?


Sounds like air in the brake system. Will need to bleed the brakes to remove the air. May possibly have to bleed the master cylinder as well.

Dec 12, 2012 | 2001 Jeep Grand Cherokee

2 Answers

1999 jeep cherokee limited- no pressure when I press break down, small leak beneath left tire I re-filled brake fluid, what should I do next?


you need to bleed the brakes,,get any air in the system out.....but make sure you fix that leak or the pipe or what ever is wrong first,,,,then get help bleeding the brakes ,,,you kinda have to no how to bleed them though you need 2 people one pumping the brakes the other bleeding the calipers,,,,

Apr 21, 2009 | 1999 Jeep Cherokee

3 Answers

Jeep Cherokee ABS light is on and now no brakes


Hi laustiin,
When the ABS system fails the brakes revert to standard brakes. The ABS module will not repair this for you.
The master cylinder is not likely to change anything either.
I am assuming that the pedal is full since you didn't say otherwise.
Your problem is most likely the brake booster. pump the brakes several times with the engine off to relieve any built up vacuum. While pressing down on the brake pedal start the engine. If the booster is working properly the pedal will move slightly down then press back against your foot. If it doesn't do this replace the booster.
If this doesn't help reply with more information and I will try to help you out.
Good Luck

Nov 03, 2008 | 1989 Jeep Cherokee

Not finding what you are looking for?
1999 Jeep Cherokee Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...