Question about 1998 Ford Escort

Open Question

Ford 1600 rocam

Looking for specs on the 1600 rocam engine or workshop manuel?

Posted by on

  • tjskeen Nov 21, 2008

    Specs on 1300 Rocam engine.

    Workshop manual for Ford Bantam LDV

  • Colin Stickland
    Colin Stickland May 11, 2010

    what is a rocam ???type engine please never heard of it ...a rotary engine

×

2 Suggested Answers

ourhowse
  • 2007 Answers

SOURCE: 1976 vw 1600 need engine tq specs

1970 - 1979 Engine Torque Wrench settings LB FT Nm mkg Connecting rod nut 22 - 25 29.8 - 33.8 3.0 - 3.3 Crankcase screws M8 (halves) 14 19.0 2.0 Crankcase nuts M12 (halves) 18 24.4 2.5 Cylinder head nuts (M10) 23 31.2 3.2 Cylinder head nuts (M8) 18 24.4 2.5 Rocker shaft to Cylinder head nuts 14 - 18 19.0 - 24.4 2.0 - 2.5 Oil Pump to crankcase nut 14 19.0 2.0 Oil drain plug 25 33.8 3.5 Oil strainer cover nuts 5 6.7 0.7 Flywheel to crankcase bolt 253 343.0 35.0 Clutch to Flywheel bolt 18 24.4 2.5 Spark Plugs 25 33.8 3.5 Engine to Transmission nut 22 - 29 29.8 - 39.3 3.0 - 4.0 Converter to Drive plate bolt 81 109.8 2.5 Generator Pulley 40 - 47 54.2 - 63.7 5.5 - 6.5 Special nut for Fan (M12) 40 - 47 54.2 - 63.7 5.5 - 6.5 Crankshaft Pulley bolt 29 - 36 39.3 - 48.8 4.0 - 5.0

Posted on May 06, 2009

  • 4938 Answers

SOURCE: FORD ESCORT ZETEC 1600 16V WORKSHOP MANUAL 1998

are you looking for a factory service manual? Helm, Inc. has a website called books4cars .
every listing available.

Posted on Oct 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 ford bantam rocam 1600 I I did the engin but now if I start the bakkie and take the steering wheel the front weels make a vibration


inspect the front wheel nuts for tightness
check the tyres are not out of round and sound
che k the steering rack for wear
balance front wheels even a wheel alignment
brakes
check the calipers for sticking slide guides
rotors for warp
and brake pad wear

26223301-evitet2jl4lc3pmm5nhbf4w4-3-0.jpg

Jun 22, 2016 | Ford Cars & Trucks

1 Answer

IM LOOKING FOR THE TORQUE SPEC. ROCAM ENGINE


That is a vague question. If in doubt use standard bolt torque along with some common sense.

May 12, 2016 | 2007 Ford Bantam 1.3i

1 Answer

Torque settings on the 1,3 ford rocam main bearings


70 ft lbs

Look at this link, it has all the specs for the 1.3L and 1.6L Ford Workshop Manuals

Nov 26, 2015 | Ford Cars & Trucks

1 Answer

Rocam 1600 engine. How do I remove the alternator?


Your best bet is to invest in a Haynes manual. See Haynes is the information resource for the DIY enthusiast It will stand you in good stead for any future work.

Sep 04, 2015 | Ford Cars & Trucks

2 Answers

What type of GEARBOX OIL is recommended for my ford bantam 1.6 petrol rocam engine 2009 model? it has 200 000 kilos on


Castrol SMX-X would be a good oil for a gearbox with that amount of mileage and is a ford recommended oil

Jun 26, 2015 | Ford Cars & Trucks

1 Answer

How to replace the waterpump of a Ford RoCam 1.3l engine


get your self a good workshop manual as will give you step by step instructions , you will then know if it's a job you can do or would rather get a mechanic in

Oct 20, 2014 | 2007 Ford Bantam 1.3i

1 Answer

Specs for a 1997 Ford Ka 1297 cc


If the vehicle is fitted with a Rocam engine, the valve clearance is not adjustable, hydraulic lifters.
The camshaft caps are torqued in two stages, first 10Nm and than 90 degrees

Apr 10, 2009 | Ford Focus Cars & Trucks

Not finding what you are looking for?
1998 Ford Escort Logo

Related Topics:

983 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...