Question about 1993 Ford Aerostar Extended

3 Answers

Tune up what do I need for a tune up? Also are the plugs easily accesible? Am trying to do this myself.

Posted by on


3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Hi tanni....First let me tell you that the plugs will be difficult to replace. Many tight spaces.
For Tune-up and routine maintenance are many but I'll list as many as I do myself.....
Air filter replacement
Transmission fluid and filter change
Check brakes
Lubricate chassis
Check cooling system
Oil and filter change
Check drivebelt
Check all fluids
Check front wheel bearings
Replace fuel filter
Check PCV valve
Check power steering fluid level
With spark plug replacement, you'll want to check the plug wires,distributor cap and rotor
Check suspension and steering
Tire pressure and rotate
And the wiper blade...can't live without them lol.
I hope this helps you!! Adios

Posted on Oct 15, 2008


Let your light shine before people. Thank you!

Posted on Sep 23, 2008


Find a slot for that thing on your computer tower or desk top. Thanks!

Posted on Sep 23, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Replace valve cover gasket

Remove wiper arms/ Remove wiper assembly/ Alternator/ Power Block/Remove intake manifold/ get new gaskets for that/ valve covers are now easily accesible . Great time to change the spark plugs and wires now. PCV valve/ Air Filter/The gaskets for my 3.3 '99 caravan were the thick rubber, and cost $120, For Valve cover gaskets, Get "THE RIGHT STUFF" and you can make your own set, black silicon gasket maker. Reassemble

Oct 12, 2014 | 1999 Chrysler Town & Country

1 Answer

Tune up 1988 Lincoln Towncar

you need: spark plugs, spark plug wires, depending on if newer system that is all. if it is older you will also need rotor cap and rotor button. label the plug wires and change one plug and corosponding wire at a time after changing the (cap and button).make shure the plug wires go on the new cap in the same order that they came off.

Mar 19, 2014 | 1988 Lincoln Town Car

1 Answer

How do you give a tune up

A normal tune up is plugs/wires/cap/rotor and fuel filter. If you have a DIS (distributorless ignition system) change plugs,wires,fuel filter. You can also change oil and air filter.

Jun 03, 2013 | 1995 Chevrolet Camaro

1 Answer

Can I do a tune up myself, if so, what items do I need

spark plugs, fuel filter, air filter, spark plug wires, pcv, rotor and cap. for the basic tune-up

Oct 07, 2009 | 1996 Geo Prizm

1 Answer

Want to know what I can do to tune up my grand am

About all you can do is change plugs and wires, and they don't do much more than that. What converter are they talking about?

May 22, 2009 | 1996 Pontiac Grand Am

1 Answer


they say 30 to 50k. i myself prefer 30k especially in older engines. usually i check the plugs at 10k to make sure they look alright. you changed wires too right? newer engine can go 50k60k.

Apr 07, 2009 | 1999 Honda Odyssey

1 Answer

05 Chevy Cavalier tries to turn over but won't start

your spark plugs are located under a ignition module in center of engine it says ecoteck on it there are( 4 )10 mm (size wrench u need ) holding the cap down and there is also a electrical connector on on end u mite have to disconnect it.pry gently up on mpoduel and you will see the plugs down in tubes ,hope this helps

Mar 31, 2009 | 2005 Chevrolet Cavalier

1 Answer

Replacing a starter on a 1997 Dodge Intrepid

No, you can access the starter from the bottom of the engine without having to remove anything else. I replaced the starter on my 94 3.3 myself without having to remove anything else. Good Luck!!!!!


Nov 11, 2008 | 1997 Dodge Intrepid

1 Answer

Tune up

change the plugs with the proper ones and make sure you check the plug gap. check and replace the air filter if its dirty, change the fuel filter and probably changing the plug wires wouldn`t hurt either.

Jun 09, 2008 | 2005 Chevrolet Equinox

Not finding what you are looking for?
1993 Ford Aerostar Extended Logo

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

77514 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

5627 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides