Question about 1995 Toyota Celica

2 Answers

3 of My Windows Stopped Rolling

The convertible top still works and the drivers side window rolls up and down. But the back driver and both on the passenger side do not work at all. no motor noise, just totally dead. I checked the fuses in the fuse box, but they all look good. Any help would be appreciated. Thanks!

Posted by on

2 Answers

Check to each window switch seperately to see if it's in the master switch. This way you would limit your problem to the driver switch. I don't know your year, but what I did was to my window switch apart (very easy) and the metal contacts in there wasn't touching correctly, so I played with them and adjusted them, plug back into the door and turn the key so that the car has power, then try to see if you can raise those windows from the master switch. If that was the problem.

Posted on Sep 19, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

Check to see if the "lockout" button on the driver side master switch is depressed. This button, when activated, kills all power to the other 3 windows.

Posted on Sep 10, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power windows will not roll down or up


If your other switches don't work, and the master is not locked, you need a new master as it is keeping the others from working.

Aug 13, 2009 | 2007 Dodge Ram Truck

2 Answers

2000 dodge durango driver side window problem


I have had to replace three of the four window power regulators in my 2000 Durango. They just seem to stop working within a year or two of each other.

Aug 02, 2009 | 1999 Dodge Durango

2 Answers

2001 Buick Lesabre windows roll up but not down.


This problem is very likely caused by the drivers side power window switch being defective, I have seen this very same problem in the shop more than once and the new master switch fixed it. here is the part number and price from www.Rockauto.com
AIRTEX Part # 1S3874-Left front Power Window Switch. Price $105.79

Aug 02, 2009 | 2001 Buick LeSabre

2 Answers

Hi, My 2002 Chevy Cavaliers windows have started having trouble rolling up. It seems they roll down fine, it's just when you try to roll them up either the 'button' doesn't work at all or it works...


Try spraying silicone spray down the sides (felt) where window slides (guides) up & down. Put window all the way down, spray them well, top to bottom,then run window up & down a few times. May not cure it, but should help. Be generous with it, but a little clean up later may be needed.

Jul 13, 2009 | 2000 Chevrolet Cavalier

2 Answers

Driver's window won't roll up all the way


If you have power windows it should be a broken cable, If its manual then it should be the crank asm. or the white plastic trac, it may torn at the end.

Apr 24, 2009 | 2002 Pontiac Grand Am

3 Answers

Driver side window


the window gears are worn out,

Aug 15, 2008 | 1995 Toyota Camry

1 Answer

Possible window fuse blown?


if the fuse is blown none of the windows will work,it sound wierd but all the power to the window motors runs through the drivers side switch. the drivers side switch may be your culprit.to be sure check to see if you have power goin in to the other switches before you replace the drivers side switch.

Jul 31, 2008 | 2002 Toyota Sequoia

Not finding what you are looking for?
1995 Toyota Celica Logo

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...