Question about 2006 Hyundai Accent

1 Answer

Shock absorber my question is how can i find the damage of shock absorber in my car

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 88 Answers

Look at each shock and look directly at the base of the shock. Look for wetness/saturation around it. It will look like a oil stain. If so that shock is losing pressure. Now keep in mind if you are going to replace the shock. GO WITH KYB. affordable and a great shock ride. and MOST OF ALL LIFETIME WARRANTY.

Posted on Dec 26, 2008

4 Suggested Answers

justuscc
  • 360 Answers

SOURCE: shock absorber

kyb shocks ar the best thats all we use also check the "ruber" on the top make sure it is compresed together any gaps cause the " bump or pounding" noise

Posted on Sep 18, 2008

shaggyrat
  • 1224 Answers

SOURCE: does a 1999 chrysler 300M use shock absorbers or struts?

if front wheel drive its struts
if rear wheel drive its shocks
this is how you tell them apart

Posted on Dec 06, 2008

  • 53 Answers

SOURCE: i have to replace shock absorbers in my accent GLS

go online to autozone.com

Posted on Mar 09, 2010

dmsr63
  • 2050 Answers

SOURCE: what can happen if i

It will handle poor, bounce a lot, like a spring action.

Posted on Oct 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What othernshocks will fit on a 2002 chevy avalanch 2 wheel drive?


These, and they must be for right model

2002 Chevrolet Avalanche 1500 Shock Absorber

  • 02 2002 Chevrolet Avalanche 1500 Shock Absorber ... www.partsgeek.com/catalog/2002/chevrolet/avalanche_1500/suspension/...
    • 4.8/5
    • 52 REVIEWS
    Buy a 2002 Chevrolet Avalanche 1500 Shock Absorber at discount prices. Choose top quality brands AC Delco, Arnott, Bilstein, Fox Shox, KYB, Monroe, OSC Automotive ...
  • 02 2002 Chevrolet Avalanche 2500 Shock Absorber ... www.partsgeek.com/.../2002/chevrolet/avalanche.../shock_absorber.html
    • 5/5
    • 45 REVIEWS
    Buy a 2002 Chevrolet Avalanche 2500 Shock Absorber at discount prices. ... Comes in three forms of Monotube Shock Absorbers, ... • 2002 Chevrolet Avalanche 2500: ...
  • Related searches for 2002 chevy avalanche shock absorbers
  • 2002 Chevy Avalanche Performance Shocks & Struts - CARiD www.carid.com > ... > Performance Shocks & Struts > Chevy > Avalanche Chevy Avalanche 2002, 4600 Series Standard 46mm Monotube Shock Absorber for Stock Height Vehicles by Bilstein®, 1 per Pack. Finish: Yellow Paint.
  • 2002 Chevrolet Avalanche 2500 Shock Absorber and Strut ... www.autopartswarehouse.com > ... > Shock Absorber and Strut Assembly We have the Largest Selection of Shock Absorber and Strut Assembly for your 2002 Chevrolet Avalanche 2500. Get yours at Wholesale Prices here at AutoPartsWarehouse!
  • 2002 Chevrolet Avalanche 1500 Shock Absorber and Strut ... www.autopartswarehouse.com > ... > Shock Absorber and Strut Assembly We have the Largest Selection of Shock Absorber and Strut ... Shock Absorber and Strut Assembly 2002. Shock Absorber and Strut Assembly for 2002 Chevrolet Avalanche ...
  • 2002 Chevy Avalanche Performance Suspension ' Shocks ... www.carid.com > ... > Suspension Systems > Chevy > Avalanche Bilstein 4600 Series Shock Absorbers and Struts are designed ... Chevy Avalanche 2002, ES Series Shock Absorber by ... 2002 Chevy Avalanche Performance Suspension ...
  • 2002 Chevrolet Avalanche 1500 Shocks & Struts - JCWhitney www.jcwhitney.com > Suspension & Chassis Looking for Shocks & Struts for your 2002 Chevrolet Avalanche 1500? ... 2002 Chevrolet Avalanche 1500 Shocks & Struts ... MONOMAX SHOCK ABSORBERS ...
  • 2002 avalanche shocks ' eBay www.ebay.com > Search > 2002 avalanche shocks Find great deals on eBay for 2002 avalanche shocks 2002 ... Ultima Strut Shock Absorber Full Set Chevy Surburban ... KYB Gas-A-Just Shock Absorbers (Fits: 2002 ...
  • Chevy Avalanche Struts - Best Shock Absorbers & Coilover ... www.autoanything.com/suspension-systems/Chevy/Avalanche/... ... Reviewed for a 2002 Chevy Avalanche -4/26/2016 10:06 PM. After researching various brands of shock, ... Chevy Avalanche Shocks & Struts are Available for ...
  • Jun 10, 2016 | Cars & Trucks

    2 Answers

    I have a 2004 gmc envoy 4x4 6 cylinders and the suspension is making a cracking noice


    you may have a bad shock absorber or broken strut. check all your suspension for obvious damage. or if the bottom of the shock absorber looks wet.

    Mar 25, 2015 | 2004 GMC Envoy

    1 Answer

    How to replace rear shocks


    Removal & Installation

    1. Raise and safely support the vehicle.
    2. Support the rear axle and slightly lower the vehicle enough to lessen tension on the shock absorber.
    3. Remove the lower shock absorber retaining nut and washer.
    4. Disconnect the lower end of the shock absorber from the mounting stud.
    5. Remove the shock absorber upper end retaining nut and washer.
    6. Remove the shock absorber from the vehicle.
    To install:
    1. Install the shock absorber onto the upper and lower mounting studs of the vehicle.
    2. Install the washers and retaining nuts. Tighten the upper and lower retaining nuts to 22-30 ft. lbs. (30-41 Nm) on 2001-02 models or 22 ft. lbs. (30 Nm) for the upper bolts and 47 ft. lbs. (64 Nm) on the lower bolts.
    3. Lower the vehicle.

    Jul 07, 2014 | 2004 Nissan Quest

    1 Answer

    Need new struts on rear, Would like to replace with air shocks. Any suggestions on how I would do this?


    Shock Absorber -The rear already has air shocks on the 1999 Cadillac Deville: REMOVAL & INSTALLATION Rear
    1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
    2. Remove or disconnect the following:
      • Rear wheel Fig. 1: Exploded view of the rear shock absorber mounting 9300vg06.gif

      • Negative battery cable
      • Shock absorber electrical connector from the rear suspension support, If equipped
    3. Support the lower control arm with a jack to relieve the tension on the shock absorber.
    4. Remove or disconnect the following:
      • Lower shock absorber mounting bolt and nut
      • Upper mounting nut, retainer, and insulator
      • Shock absorber compress by hand and remove through the upper control arm
      To install:
    5. Position the top of the shock absorber with the insulator attached into the suspension support.
    6. Install or connect the following:
      • Upper shock insulator, retainer and nut. Torque the nut to 55 ft. lbs. (74 Nm).
      • Shock absorber lower mounting nut/bolt. Torque the nut to 75 ft. lbs. (102 Nm).
      • Shock absorber electrical connector to the rear suspension support, if equipped
      • Rear wheel
      • Negative battery cable
    prev.gif next.gif

    Jul 29, 2010 | 1999 Cadillac DeVille

    2 Answers

    What is service ride control


    Service Ride Control means one or some of your shocks or struts are worn and may need replacing. The price for new ones is not cheap,

    Jul 13, 2010 | 2006 Cadillac Escalade

    1 Answer

    Replace broken sway bar for a 1996 ford windstar


    Section 04-01: Suspension and Wheel Hubs, Front 1996 Windstar Workshop Manual REMOVAL AND INSTALLATION Stabilizer Bar Removal
    1. Raise and support the vehicle. Refer to Section 00-02 .
    1. Support vehicle with hoist or safety stands behind front sub-frame (5C145).
    1. stw~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: To avoid damage to the 6 mm drive hole in the front stabilizer bar link ball stud, do not use an Allen wrench to break loose or tighten or final tighten the front stabilizer bar link-to-shock absorber nut.
      Using care not to damage the front stabilizer bar link ball stud seal, remove the RH and LH front stabilizer bar link-to-front shock absorber nut.




    1. Using care not to damage the front stabilizer ball link stud seal, remove the RH and LH front stabilizer bar link-to-front stabilizer bar nut.
    1. stw~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Use extreme care not to damage the ball joint boot.
      With another set of support safety stands under front sub-frame, remove two rear sub-frame retaining bolts. Lower rear of the front sub-frame to obtain access to stabilizer bar brackets (5486).
    1. Remove front stabilizer bar bracket bolts, stabilizer bar brackets, stabilizer bar bracket insulators and front stabilizer bar (5482) as required.
    Installation
    1. Clean front stabilizer bar to remove dirt and contamination in area of stabilizer bar bracket insulator installation position.
    1. Lubricate inside diameter of new stabilizer bar bracket insulator with Rubber Suspension Insulator Lube E25Y-19553-A meeting Ford specification ESF-M99B112-A or equivalent. Do not use any mineral or petroleum based lubricants as they will deteriorate the rubber stabilizer bar bracket insulators.
    1. Install new stabilizer bar bracket insulators onto front stabilizer bar and position them in approximate location.
    1. Install stabilizer bar bracket on stabilizer bar bracket insulators and install new bolts. Tighten to 55-63 Nm (40-46 lb-ft).
    1. Raise front sub-frame and install new front sub-frame-to-body retaining bolts. Tighten to 115-132 Nm (85-97 lb-ft).
    1. Install front stabilizer bar link (5K483) to front shock absorber. Use care not to damage link ball joint boot seal.
    1. stw~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: To avoid damage to the 6 mm drive hole in the front stabilizer bar link ball stud, do not use an Allen wrench to break loose or tighten or final tighten the front stabilizer bar link-to-shock absorber nut.
      Install a new front stabilizer bar link-to-shock absorber nut. Tighten to 90-100 Nm (66-74 lb-ft).

    2. 66a0f1a.gif

    Apr 28, 2010 | 1996 Ford Windstar

    1 Answer

    On the 2000 jaguar s-type, what is, Cats system


    Cats was a optional extra from the factory. It is adaptive damping. It basicialy softens or stiffens the shock absorbers to your driving style.

    It may seem that one of your shock absorbers has developed a internal pressure fault. A local garage with a code reader can tell you wich shock absorber to check. Would be worth checking the electrical connectors that plug into the top of the shock absorber to make sure they are not damaged.

    Look's like you may need a new shock absorber

    Jan 06, 2010 | 2000 Jaguar S-Type

    1 Answer

    Is it possible to buy the washers for my landrover discovery 1998 shock absorbers. maybe I should just buy the shock absorbers. I find there is a squeeking sound on my right tire. at close inspectino, i...


    Are we talking about the plastic-rubber cover on the shock absorbers?
    Yes they can be replaced.However if they are worn then you better replace them quickly before dirt and dust damages your shocks.

    Jul 23, 2009 | 1998 Land Rover Discovery

    1 Answer

    Shocks


    rear
    5955ba5.gif ------------------------------------------------------------------------------------------

    front

    Removal
    1. Remove front shock absorber-to-upper shock bracket nut and bolt.
    1. Disconnect the lower end of the front shock absorber bolt and nut from the U-bolt plate.
    1. Compress the front shock absorber and remove.
    Installation
    1. Insert front shock absorber into the front shock absorber mounting bracket (18183). Insert bolt and tighten nut to 60-81 Nm (45-60 lb-ft).
    1. Attach the lower end of the front shock absorber to the U-bolt plate by installing the nut and bolt. Tighten to 60-81 Nm (45-60 lb-ft).
    ---------------------------------------------------------------------------------------------

    front


    Feb 04, 2009 | 1996 Ford F350 Crew Cab

    1 Answer

    How to take off & install front shocks on a 2002 Chevrolet S-10


    NOTE Hold the shock absorber stem with a wrench while backing the nut off.
    Wheel Mounting nut


    Retaining nut and grommet Shock absorber-to-lower control arm bolts Shock absorber Replace the parts, as necessary.

    0900c1528024dc58.jpg enlarge_icon.gifenlarge_tooltip.gifFig. Front shock absorber mounting-2WD vehicles


    To install:
    1. Fully extend the shock absorber stem, then push it up through thelower control arm and spring so that the upper stem passes through themounting hole in the upper control arm frame bracket.
    2. Install or connect the following:

      Retaining nut and grommet on the stem. Tighten the nut to 106 inch lbs. (12 Nm).


      Shock absorber-to-lower control arm bolts and tighten to 22 ft. lbs. (30 Nm) Wheel

    Oct 17, 2008 | 2001 Chevrolet S-10

    Not finding what you are looking for?
    2006 Hyundai Accent Logo

    Related Topics:

    215 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hyundai Experts

    yadayada
    yadayada

    Level 3 Expert

    60769 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21949 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6811 Answers

    Are you a Hyundai Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...