Question about 2006 Suzuki Forenza

1 Answer

How to remove a piece of key in the ignition of a 2006 suzuki forenza

My key broke in the ignition there is only a small piece stuck in the ignition how do i remove it,

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

It will be very difficult what you need to do is go to your local lock smith and see if they will sell you two key extractors they look like very small drill bits about as big around as a large safety pin. With small teeth on both side. Once you get them you will insert one one top of the broken side of the key and one on the bottom twist them around each other a couple of time and gently pull out the key. Hope This Is HELPFUL

Posted on Sep 09, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 Nissan Maxima, key broken off in ignition, any ideas?


Use a small or mini pair of needle nose pliers to grab it and pull it out but make sure it is in the off position

Jun 21, 2014 | 1998 Nissan Maxima

1 Answer

I can't remove my Ford E-350 1998 econoline ignition switch.


You need to either see a locksmith or make a "bump key". Search youtube.com on how to make a bump key set. You need to purchase five blank (uncut keys) to make a bump key set. You will need to rotate the ignition key counterclockwise to Accessory, there should be a small hole to depress the release with a piece of coat hanger wire. I hope this helps, good luck!

Mar 26, 2014 | Ford E-350 Cars & Trucks

1 Answer

Ignition lock column disconnect key


can you put the broken key into ignition barrel up and turn

Feb 06, 2014 | 2006 Suzuki Forenza

1 Answer

Steering wheel lock


remove the switch , by following (old post) the FSM under steering
for Ignition switch removal.
this act , unlocks the lock.
one other way, is to destroy the cylinder, (ask a thief) and turn the guts
until it unlocks,

Feb 06, 2014 | 2006 Suzuki Forenza

1 Answer

Ignition key remove switch


double posted, now , double answered.
old post.
Remove the switch , by following (old post) the FSM under steering
for Ignition switch removal.
this act , unlocks the lock.
one other way, is to destroy the cylinder, (ask a thief) and turn the guts
until it unlocks,

Feb 05, 2014 | 2006 Suzuki Forenza

1 Answer

Removing Ignition cylinder


Us a small metal curved pick and a small screw driver and with a little Patience you can get the broke key out . Good luck

May 19, 2013 | Cars & Trucks

1 Answer

Why would a 2006 suzuki forenza cut off when you come to a stop


#1 all time reason for stalls is
stuck open EGR valve.
but there are 50 more. reasons, so.... that takes diagnosis.
that is what technicians do..
but can be broke down to 3, given 2 facts, (good EGR AND CAT NOT MELTED TO A BLOCK WALL)
1: BAD COMPRESSION. (can happen on any cylinder , hot or cold)
2: bad spark (tune up)
3: bad fueling.

1,2,3, can expand to 50 topics and tests)

Mar 18, 2013 | 2006 Suzuki Forenza

2 Answers

Nnthe key broke off inside the ignition and am trying to figure out how to remove the broken piece from inside the ignition since i have another key


If the broken piece of key is not sticking out of the ignition lock, unlikely you will be able to remove
it. Because its probably one solid broken piece and its bent so it wont slide right out.

But try getting a strong magnet, and put your spare key in until it touches the broken piece of
key in the ignition. Stick the magnet on the spare key and see if you can pull the broken piece out.

If you have an old speaker thats not working, there will be a strong magnet on the back of the
speaker. Or use a magnetic pickup tool for picking up screws, sockets and stuff under the hood of
your car. You can get a magnetic pickup tool from an auto parts store.

If you cant get the broken piece out you will need to replace the ignition lock. Not easy on
a Cadillac, probably has the telescoping/ tilt steering wheel.

Aug 12, 2011 | Cadillac DeVille Cars & Trucks

2 Answers

I have a 2006 Suzuki Forenza that is stuck in park. I can get it out of park to reverse but it takes awhile. No one can say whats wrong with it but so far it could be the stop light switch, reverse...


Most common reason is that your ignition switch is too fussy. Spray some WD-40 on the key and then insert it and turn it on. Repeat a few times if necessary. J.

Aug 05, 2010 | 2006 Suzuki Forenza

1 Answer

Was replacing the ignition switch and accidently broke off a silver piece off of where the switch goes connected. Can you some one tell me if this can be replaced and if I have to replace the entire key...


Replacing An Ignition Switch..

If The Ignition Switch Is Defective, It Must Be Replaced Regardless. Before Removing A Dashboard-mounted Switch, The Tumbler (Lock Mechanism) Must Be Removed From The Switch.Normally A Small Piece Of Wire Is Inserted Into A Hole IN The Front Of The Switch And The Key Is Turned.This Will Release The Tumbler From The Switch So The Tumbler Can Be Pulled Free. Then Unplug The Wires And Remove The Old Switch.

A Steering Column-mounted Ignition Switch Is Separated From The Tumbler. It Is Normally About Halfway Down And On Top Of The Steering Column. To Remove This Type Of Switch, Remove The Fasteners Holding The Steering Column To The Dash. This Will Let The Column Drop Down So You Can Replace The Ignition Switch.

Apr 09, 2010 | 1999 Dodge Caravan

Not finding what you are looking for?
2006 Suzuki Forenza Logo

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

74418 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...