Question about 1997 Ford F150 Regular Cab

1 Answer

Fuel filter I've removed the clamps on my 1999 F150 fuel filter and I still can't remove it. I know it can't be that hard to get off but I'm afraid of breaking something.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is a tool you can buy for just a few dollars that you need to use to get it off at any auto parts store. They usually come in a pack or multiple different sizes. After that, it should only take you a few minutes.

Posted on Oct 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to change my 1999 excel's air filter and fuel filter, i was wondering what i need to do to replace the air filter, as I know the fuel filter will take me a lot longer, but i need to improve its...


There are no tools required to replace the air filter. On your car, the air filter compartment has several clamps that can be pulled up by hand. Once the clamps are popped up, remove the cover and replace the air filter (pleated side down). Simply close the cover and push the clamps back into place and you're done!

Mar 17, 2011 | Hyundai Excel Cars & Trucks

2 Answers

Instal 1999 ford taurus fuel filter


along the drivers side under the car

Nov 03, 2010 | 1999 Ford Taurus

3 Answers

How to take the lines off the fuel filter efi its


You will need a Ford fuel line dis-connect tool to slip under the collar on the fuel line fitting to release the fitting from the fuel filter, and the tool is available at most auto part stores, here is an image of one, and let me know if you require any further assistance.


25fde27.jpg

Aug 05, 2010 | 1991 Ford F150

2 Answers

Fuel filter installation


Hello there:
assuming that thisiswhat youare loking for here Ford Explorer Fuel Filter - Hastings Product Description: HASTINGS FUEL FILTER -- OEM Direct Fit Replacement In-Line Fuel Filter, 3 1/8 O.D., 5/16 Inlet, 5/16 Outlet, 6 25/32Length, Replaces Ford F0TZ-9155-B; Baldwin BF1166,
  • 1991-1998: Eddie Bauer; 6Cyl 4.0L GAS, FI, VIN "X";
  • 1991-1998: Sport; 6Cyl 4.0L GAS, FI, VIN "X";
  • 1991-1998: XL; 6Cyl 4.0L GAS, FI, VIN "X";
  • 1991-1998: XLT; 6Cyl 4.0L GAS, FI, VIN "X";
  • 1993-1998: Limited; 6Cyl 4.0L GAS, FI, VIN "X";
ahg8018.jpg Ford Explorer Fuel Filter - Fram Product Description: FRAM IN-LINE GASOLINE FUEL FILTER -- 7.16" Height, 5/16 (Tube) I.D., 2.13" O.D., Features High Technology Filtration, Designed To Provide Optimum Balance Between Low Restriction And Required Efficiency, Comes With....
  • 1999-1999: XL; 6Cyl 4.0L GAS, FI, VIN "E";
  • 1999-1999: XL; 6Cyl 4.0L GAS, FI, VIN "X";
  • 1999-2000: Eddie Bauer; 6Cyl 4.0L GAS, FI, VIN "X";
  • 1999-2000: Sport; 6Cyl 4.0L GAS, FI, VIN "X";
  • 1999-2000: XLS; 6Cyl 4.0L GAS, FI, VIN "X";
are several filters that willfit your vehical

Nov 22, 2009 | 1996 Ford Explorer

2 Answers

How do i change a fuel filter on a 2001 f150


The clamps are just a secondary lock, special tools are needed to unlock the fuel lines.

Nov 05, 2009 | 2001 Ford F150 Styleside SuperCrew

1 Answer

Fuel Filter is clogged. How do I unhook or remove the in line fuel filter?


There are clips on each end of the fuel filter. make sure to relieve the pressure form the lines before attempting to remove this components. gently remove the clips or clamps form each end of the filter and, slide the filter off the ends of the lines. The fuel filter itself is held or, attached to the under body by a holding(mounting) clip. release the mount before removing from the line.

Jun 15, 2009 | 1996 Ford F150 Regular Cab

1 Answer

How to replace fuel filter on a Mercury Village '95?


go here for help on villager issues

http://autos.groups.yahoo.com/group/villagerquest/

It's unde the hood, on the firewall, on the driver side.

Fuel Filters In-Tank
Removal and Installation
The in-tank fuel pump filter is not serviced separately. To service the fuel pump filter, replace the fuel pump (9350). Refer to the procedure in this section. In-Line
Removal
The following illustration is an exploded view of the fuel filter (9155).

c599850.gif
Item Part Number Description 1 9K299 Fuel Filter Upper Hose 2 9A335 Fuel Filter Bracket 3 — Fuel Hose Clamp 4 9C323 Fuel Filter Lower Hose 5 9155 Fuel Filter 6 — Fuel Hose Clamps
  1. Relieve the fuel system pressure. Refer to the procedure in this section.
  1. Remove the fuel hose clamps.
  1. Disconnect the upper and lower fuel filter hoses from both ends of the fuel filter. Plug the fuel hoses to prevent leakage and contamination.
  1. Remove the fuel filter from the fuel filter bracket (9A335).

Jun 05, 2009 | 2001 Mercury Villager

1 Answer

Hard to remove plastic cover over the air filter.


remove the 2 bolts securing plastic case u see first then look under cover youll see the filter housing open and replace dont forget to attach all the clamps and hoses u removed

Apr 07, 2009 | 2000 Chrysler Town & Country

1 Answer

Basic service


Here are detailed instructions on the location, removal, and re-installation of your fuel filter. Hope it helps and have a great day!

REMOVAL & INSTALLATION
Carbureted Engines
These vehicles use two replaceable fuel filters. A small one is in the fuel line under the hood; a larger one is located at the rear, just inboard of the left rear wheel.
Whenever the filter(s) are replaced, take great care to avoid the entry of dirt into the lines. Also, pay attention to the correct installation position. It is possible to install the filter backwards.
FRONT
See Figure 2
  1. If applicable, disengage the filter or hose from its retaining clip.
  2. Using two fuel line clamps, pinch off both fuel lines. Take care not to crush the lines; just clamp them shut.
If the fuel hoses are hard or cracked, it is necessary to replace them.
0900c1528005f267.jpgFig. 2: Front fuel filter used on carbureted engines
  1. Loosen the fuel line clamps and slide them back.
  2. Using a twisting motion, remove the fuel lines from the filter.
  3. To install, use a new fuel filter and reverse the removal procedures. Start the engine and check for leaks. Correct any leaks immediately.
REAR
See Figures 3, 4, 5 and 6
  1. Raise and safely support the rear of the vehicle. Remove the left rear wheel.
  2. Remove the bolts securing the filter and its basket to the fuel tank.
0900c1528005f268.jpgFig. 3: Remove the bolts securing the filter and its basket to the fuel tank ...
  1. Push the fuel filter retaining tab and release it from the basket.
0900c1528005f269.jpgFig. 4: ... then release the basket from the filter
  1. Using two fuel line clamps, pinch off both fuel lines. Take care not to crush the lines; just clamp them shut.
0900c1528005f26a.jpgFig. 5: Clamp the fuel lines shut. If the lines are hard, cracked or brittle, they must be replacedIf the fuel hoses are hard or cracked, it is necessary to replace them.
  1. Loosen the fuel line clamps and slide them back.
  2. Using a twisting motion, pull the fuel lines from the fuel filter; remove the filter.
0900c1528005f26b.jpgFig. 6: After sliding the retaining clamps back, the filter can be removed from the linesTo install:
  1. Use a new filter and reverse the removal procedures.
  2. Make certain the retaining tabs are engaged when the filter is installed in the holder. Tighten the bolts until snug.
  3. Install the left rear wheel. Lower the car to the ground.
  4. Start the engine and check for leaks. Correct any leaks immediately.
Fuel Injected Engines
See Figures 7, 8, 9, 10, 11 and 12
The canister fuel filter is located in the engine compartment. When buying the new filter, also buy new washers for the banjo bolts and the service bolt. Failure to replace these washers invites high-pressure fuel leaks. Replacing the washers is required, not recommended.
  1. Disconnect the negative battery terminal.
  2. The fuel system is under pressure. Release pressure slowly and contain spillage. Observe "no smoking/no open flame" precautions. Have a Class B-C (dry powder) fire extinguisher within arm's reach at all times.
  3. Disconnect the banjo bolts and/or threaded fuel line fitting from the fuel filter. Use of a flare nut or line wrench is recommended for disconnecting and attaching this fitting.
0900c1528005f26c.jpgFig. 7: Fuel filter used on fuel injected Accords through 1989 0900c1528005f26d.jpgFig. 8: Fuel filter on 1990-93 fuel injected Accords 0900c1528005f26e.jpgFig. 9: Fuel filter used on fuel injected Preludes through 1991
  1. Loosen the fuel filter clamp bolt, then remove the filter.
To install:
  1. Install the new filter and secure the clamp bolt.
  2. The upper and lower washers on each banjo bolt and the washer on the service bolt MUST be replaced whenever the bolts are loosened. Install the washers and banjo bolts. Tighten the banjo bolts to 16 ft. lbs. (22 Nm) on all models except 1992-95 Preludes. On these models, tighten the bolt to 20 ft. lbs. (28 Nm). If applicable, tighten the threaded fuel line fitting to 27 ft. lbs. (37 Nm).
0900c1528005f26f.jpgFig. 10: Fuel filter used on 1992-95 Preludes 0900c1528005f270.jpgFig. 11: Fuel filter used on 1994-95 4-cylinder AccordsIt will be necessary to use a crow's foot attachment on a torque wrench to properly tighten the threaded fuel line fitting.
  1. Tighten the service bolt to 9 ft. lbs. (12 Nm).
  2. Start the engine and check for leaks. The engine may crank longer than normal until full fuel pressure is developed. Correct any leaks immediately.
0900c1528005f271.jpgFig. 12: V-6 Accord fuel filter

Nov 23, 2008 | 1985 Honda Accord

1 Answer

PETROL FILTER LOCATION


Hi,

I am assuming you would want to know the placement of the fuel filter. It actually depends if your Elentra is a Sedan or Wagon.
To my knowledge a 99 Hyundai Elentra has an inline fuel filter. It is located in the engine bay right against the firewall. It could either be on the driver side or the passenger side. It looks like a small canister with tubing connectors at the top and bottom. It is normally held by a clamp.. It maybe necessary to remove the air filter box to have easy access on removal of the fuel filter. It is a sound practice to relieve the fuel pressure prior to fuel filter removal.

If on the other hand, you are seeking locations where you can purchase a fuel filter for your 1999 Elentra, pls try here, here, here or even eBay for a start.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Jul 11, 2008 | Hyundai Motor 1999 Elantra

Not finding what you are looking for?
1997 Ford F150 Regular Cab Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...