Question about 1984 Ford Mustang

1 Answer

Used Van I just bought an Econoline 150 for work. I paid cash for it and it was an as is sale. I test drove it, and it drove well. I knew I needed to get new tires and brakes. Over the last day I have had these problems 1. When I stop the brakes feel like they are pulsating. 2. The dash lights won't come on and the cigarette lighter doesn't work. 3. It took me almost 30 minutes to get the key to turn the ignition. So when I turn the van off I left the ignition half way turned so that it wouldn't lock. When I turn the ignition back on I couldn't get the van in gear. I tried to put the car in gear and start it and it wouln't work. I finally put the van in neutral and was able to drive. Right now my biggest concern is getting the key to turn the van on.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 62 Answers

Go to parts store buy new ignition cylinder ford are easy to replace. Once you have new ignition turn on old ignition to run position just under the switch you will see a hole push in the silver pin on that hole and pull out old switch and insatll new hope that will solve your problem

Posted on Sep 09, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where can I find a free under hood wiring diagram for a 1985 f-150 Econoline Van


it depends for what part for example if it is the car radio you might fry:
1985 Ford Econoline Van Car Audio Wiring Diagram

at paid wiring diagram you might try:

Your Source for all of your wire info wiring info wire information wiring...

at free wiring diagram you might try Auto-Zone:

GET 35 GIFT CARD FOR EVERY 100 SPENT ON ONLINE SHIP TO HOME ORDERS

or try this one:

Ford Truck Technical Drawings and Schematics Section Wiring Diagrams

or you might try:

https://www.popscreen.com/prod/MTMwODcyMTgx/-Econoline-Van-Wiring-Diagram-E100-E150-E250-E350-Club-Wagon-Electrical

also I have found that if you have a library card you can go to the public library and find reference manuals or shop manuals that you would normally have to purchase but can borrow for free. Good Luck.

Sep 27, 2015 | Cars & Trucks

1 Answer

1996 Ford Econoline charging problem


Is this E-150 econoline?
Engine running, take reading at generator bat terminal, what is it? The basics, take reading across battery terminals, everything off. Take second reading at bat terminals, engine running. The second reading should be higher than the first if charging system is working. Was the charging system checked on the vehicle when the generator was checked out?
There could be a wiring circuit problem? The bat terminal at generator is hot all the time, engine running or off.

Aug 02, 2017 | 1996 Ford Econoline

2 Answers

I need a heater/A/C temperature control cable for a 1987 Forde Econoline E-350. Where can I find it?


Hello! Google; Temperature control cable 1987 ford E350...Click on the second choice; Ford E350 Econoline Car Parts Used...You can identify it by looking at the bottom line...The service advisor.com/part...
It searches the country for your part....Guru........Saailer

Aug 10, 2010 | 1987 Ford Econoline

1 Answer

We have a 1989 ford 150 van 351 and it idle very


idle air control valve needs replaced loaded up with carbon

Apr 23, 2010 | 1988 Ford Econoline

1 Answer

How am I able to test an Idle Air Control Valve for a 2000 Ford Econoline Universal Van E-150 5.4L?


if you go to the trouble to remove it id suggest installing a new one if the van is idling incorrectly or abnormally high it may be faulty

Jan 19, 2010 | 2000 Ford Econoline

1 Answer

Heater motor not working, checked fuses none,ford van


Probably the resistor plug located under the dash.

Dec 29, 2009 | 1989 Ford Econoline

1 Answer

1999 Ford E250 Van will not start


i've never heard of a cold temp sensor... theres an intake air temp sensor it goes in the large plastic tube that comes off your air filter box, i doubt this is your problem tho.. i would lean more toward the fuel pressure regulator or one of the injectors could be dumping. also a clogged catylitic converter may cause an overfueling situation. hope this helps and good luck

Jun 24, 2009 | 1999 Ford Econoline

1 Answer

Vehicle return


you need a lawyer not a mechanic!

Jun 21, 2008 | 2005 Kia Sedona

Not finding what you are looking for?
Cars & Trucks Logo

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

fordexpert

Level 3 Expert

5687 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...