Question about 2006 Peugeot 604
I had a service on my 406 hdi estate and the garage disconnected the battery. Remote central locking doesn't work now. Key will still do central locking from the door
This may work so give it a try firstly if it was me i would ask the garage who did the work to sort it out as its there fault but failing that put the key in the ignition and hold the lock button for 10-15 seconds this may reprogram it to the car hope it works ;)
Posted on Nov 15, 2009
Tips for a great answer:
Nov 29, 2014 | 2005 Peugeot 307 HDi
Apr 05, 2013 | Cars & Trucks
FOB / PLIP PROGRAMMING :
406 deadlocking remote control has specific button controls, and if the vehicle
has two controls, one is set as primary and the other as secondary.
replacing the Plip, a Primary or Secondary Plip are different part numbers and
must be ordered as required. The white label inside the Plip is labelled PRIM
Turn the Ignition switch ON.
Press the large Plip key button (Primary Plip)
Within 10 seconds press the large Plip key button (Secondary Plip)
If there is one remote, press the Primary plip button twice.
Turn ignition OFF.
Test Plip's for correct operation.
NOTE : On some 406 models, Plips cannot be re-synchronised unless the battery has been disconnected for 1 minute
Oct 27, 2012 | Cars & Trucks
Feb 12, 2010 | 1991 Peugeot 405
Dec 01, 2009 | 1991 Peugeot 405
Sep 15, 2009 | 2005 Peugeot 405
Sep 10, 2009 | 2005 Peugeot 405
Sep 02, 2009 | 2005 Peugeot 405
2,844 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: