a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Have you checked your freon level? The compressor will not engauge when the R134 level is too low .More than likely you need to recharge the system after 14 yrs you may have a small seal leak. Try picking up a recharge kit with a gauge attachment. This has worked well for me on my 3 Astros I currently own. Othwise the fuse box is on the drivers side left of the steering column.
Hello Marcias. Yes, it is OK to have one installed. Just make sure that when it is that all of the wires are properly soldered and connected. Have it done by a qualified installer as I have seen some that are poorly installed and can cause some problems. Your Intrepid may have an antitheft system and would need a module to allow the Autostart to work. If this is required it would take a little more time to install it. I have all of my vehicles with them and have caused no problems at all. If you have any more questions please leave them in "add comments" and I will be back to answer you. Best of the season to you.
Many autostart devices also have security systems incorperated, first I would try to arm and disarm the system then try to start again. Then check the autostart controll unit to see if there is a reset or fuse. If not a reset often times there is a disable for the autostart witch will allow you to diagnos the starting problem without the aftermarket device. If non of that helps post your next message with an update plus make and model # for the autostart.