Question about 2003 Land Rover Freelander

2 Answers

How to wire a towbar to a landerrover freelander 03

Help

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 89 Answers

There is already dedicated wiring for this , remove the right rear luggage compartment cover.You will find a loose white plug taped to the wiring harness , you can plug in a factory harness or cut the plug off (each wire seperately)test each wire and wire this up to your trailer plug.You will get wire details for your region from your nearest repair shop.

Posted on Nov 21, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

No, there's not dedicated wiring for this. Landman must be talkign about a Disco or other model. This vehicle has to be hard wired from the battery. You need what's called a modulite and a wiring kit.

check out www.youtube.com and type in modulite installation. They have several vehicles similar that are wired the same way.

Posted on Jun 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to wire a gray towing plug


Refer to the diagram in the link supplied. The grey towing plug is the 12S. Towbar Wiring Diagram

Aug 26, 2011 | 2002 Land Rover Freelander

1 Answer

Hse td4 rear sensor intermittant continuous beep on reverse selection - towbar not fitted


one of the sensor's wire might be short circuit so if you are able to open the bumper just check the wires those going to the sensors. if it didn't help come back to me

Jul 06, 2010 | 2002 Land Rover Freelander

1 Answer

Connecting a towbar


The first thing to do is not to guess at what wires do what. Go to the hardware store and pick up a tester that has only one test prong. They usually have a battery in them. put the tester in the connector terminals and test one at a time. These little tester require you to be somewhat grounded like leaning your arm against some metal on the car. if you can't find somewhere to ground your self, then run a small wire from the negative battery post/wire and wrap the bare wire around your finger. Turn on which ever item you want to test first. When you find the wire that is hot9lights up the tester) then plug in to one of the tow bar wires. you should avoid plugging in a ground wire. You can usually trace which one is the ground wire. Another way to trace which is the ground wire is to use a continuity tester. Put on tester lead on the frame of the tow bar and the other lead on a tow bar connector wire and you should get a light on the tester when you find the one that is the ground wire and then mark that connector wire so you don't connect any of your hot wires to it.
Hope this helps

May 26, 2010 | 2002 Land Rover Freelander

1 Answer

Towbar electrics


www.witter-towbars.co.uk/pricelists/ZEKR0002.swf

Apr 02, 2010 | 2002 Land Rover Freelander

1 Answer

Wiring for a towbar on a, vw bora


The following is the wiring for your towbar
Check the inside of the socket and you will find each of the 7 pins are numbered 1 - 7.
No 1 Yellow Wire. Left side Flasher
No 2 Blue Wire. Fog Light.
No 3 White Wire.. Earth.
No 4 Green Wire. Right side Flasher
No 5 Brown Wire. Left side Park Light.
No 6 Red Wire. Brake Lights.
No 7 Centre Pin. Black Wire. Right Side Parh Light.
Hope This helps.
John

Sep 11, 2009 | 2001 Volkswagen Golf

1 Answer

All stop lights not working just fitted towbar worked when first fitted


u have shorted out the brake lights, disconnect the tow bar and replace the fuse, the tow bar wiring is shorting out

Sep 04, 2009 | 2004 Land Rover FreeLander

1 Answer

Cant find the towbar electrics plugs for x-type


I assume that the towbar didn't come with a proper wiring kit as, unfortunately there is not a specific connector for the towbar wiring on the x-type, the proper Vehicle Specific Kit plugs into the rear light. There is a power connector with three pins on the left and a grey reverse sensor cut out connector also on the left. but you will either need to use a Vehicle Specific Wiring kit (about £175) or use a bypass relay system.

Aug 30, 2009 | 2006 Jaguar X-Type

1 Answer

Towbar wiring for bmw x3


I dont know this particular model but if you go to a caravan sales pitch ,they usually have the wiring diagrams at the back of their caravan brochures. You could always tell them that you,re interested in getting a caravan but dont know if your car can be wired for one.Also try towbar sellers, they always give out the diagrams. Hope this helps.

May 20, 2009 | 2009 BMW X3

Not finding what you are looking for?
2003 Land Rover Freelander Logo

859 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...