Question about 1993 Chevrolet C1500

1 Answer

No brake lights

I have no brake lights but everything ealse works. ive changed the bulbs the light receptant plate and the brake switch but still no brake lights. i have checked the fuses and they are fine.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 3 Answers

You need to check for power and ground at the bulb sockets.
may have a broken wire/ corroded connector somewhere.

Posted on Sep 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1994 3000gt has no rear license plate light


run a wire from the tail lights to the plate light . if this works the wire to the plate light is broken , if not replace the light socket

Feb 26, 2014 | Mitsubishi 3000GT Cars & Trucks

1 Answer

Brake lights not working not the bulb


Check fuses, may have lost you brake light switch as well. Located behind brake pedal.

Apr 11, 2013 | 1997 Mitsubishi Diamante

1 Answer

The brake lights on my 95 yukon stopped working...the only thing ive done is changed the bulbs and it didnt work


It is probably the stop light switch on the brake peddle but check the stop light fuse first .....

Jun 07, 2011 | GMC Yukon Cars & Trucks

1 Answer

My brake lights are not working on my dodge durango 5.9 liter 360 hp 2001 ive changed the fuse for the hazard lights, they are working fine now and ive changed the bulbs. the switch under the brake pedal...


Hello and welcome to FixYa!

Try to check the ground of the tail lights. It can be disconnected or worn out. It's a black colored wire that needs to be attached on the car's body. This can do the trick.

Hope this helps and thank you for using FixYa! Have a good one!

May 03, 2011 | 2001 Dodge Durango

1 Answer

My brake lights dont work and ive replaced everything fuses swith bulds all my other lights work and they still wont work can someone help


You have replaced the switch on the brake pedal? The fuses, and the bulbs? The rear light assemblies on GM trucks get corrosion in them and then they don't work. If you have replaced everything else then you may be looking at two rear light assemblies. Check for power at the harness connector at the taillights. Make sure your grounds are ok as well.

Mar 17, 2010 | 1992 Chevrolet S-10

2 Answers

Turn signals work but the brake lights do not how do i get them to work? i already changed the flasher.


I have a 2001 Ford F150, my brake lights dont work. Ive replaced the bulbs, checked the fuses,and the brake switch on side of the brake pedal was replaced. I still dont have any brake lights. My third brake light works fine, along with my running lights,flashers, blinkers.

Jun 18, 2009 | 1985 Ford F150

1 Answer

Brake lights not working, central brake light is. ive changed bulbs and fuses


if both fuse and bulbs are good after that there is a push switch on the brake pedal itself some times these stick and or fail to work at all and need replacing quite a simple operation take wires off replace switch and replace wires if you touch the two wires together the lights should come on do this before buying new switch

Nov 08, 2008 | Ford Focus Cars & Trucks

Not finding what you are looking for?
1993 Chevrolet C1500 Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...