Question about 1997 Chevrolet Lumina

1 Answer

1997 chevrolet lumina

I have to change the driver side frint light assemby. Please give me the steps.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 84 Answers

If your talking about the headlamp, open your hood, look right behind the headlamp and you will see either two or three black funny looking nuts (I think they call them "wing nuts") turn them off while holding on the headlamp, then pull headlamp out slowly, unplug the headlight bulb, grab the back of the headlight bulb, turn and pull it out. (Put a plastic bag, like a sandwich bag over your hand). DO NOT touch the headlight bulb with your hands or you will burn out the bulb. These are very sensitive bulbs and DO NOT like the oils from your skin. Set it down somewhere very safe so it will not roll or touch anything greasy or oily. Next, unplug the parking light, turn and pull out. Replacement is reversal. Hope this helped!

Posted on Nov 17, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do i fix stop light and turn signal went out at same time?

Can you give me some more info please
have they stopped Woking on one side or both?
if one side do any of the other lights on that side work?
the most common fault if more than one light stops working is the earth wire is loose or broken

Sep 14, 2014 | 1997 Chevrolet Lumina

2 Answers

How do you change a turn signal bul on a 90 chevy

there should be an access panel in the trunk.

Apr 18, 2010 | 1990 Chevrolet Lumina

1 Answer

1997 Lumina where is the turn signal relay?

the turn signal flasher is underneath the driver side dash

Mar 09, 2010 | 1997 Chevrolet Lumina

2 Answers

Where is the low pressure access port for the air conditioner on a 1997 Chevy Lumina?

the heavier hose is the low pressure line
you will see a green cap on the port

Mar 07, 2010 | 1997 Chevrolet Lumina

1 Answer

1997 lumina, drivers side brake light does not work but that turn signal does

check the socket and make sure your ground wire is connected.

Jan 16, 2010 | 1997 Chevrolet Lumina

1 Answer

Ac refill help!

either one can be filled from one is the high side one is the low side usually you fill from the low side though it is the larger of the two lines. unless you have special gauges you cannot even hook up to the high side of the system

May 20, 2009 | 1997 Chevrolet Lumina

1 Answer

1997 Chevrolet Lumina stalled

I think they are 3 sets.

One on left side of motor
One on right side of motor
One at passanger side door once you open it!

Never hook both cables up to the main power sources car. just the red is needed always ground the ground out to metal on the engine not the battery!

Jan 17, 2009 | 1997 Chevrolet Lumina

Not finding what you are looking for?
1997 Chevrolet Lumina Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77947 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides