Question about 1995 Land Rover Range Rover

1 Answer

1992 Range Rover

Interior lights staying on after having left some doors open for a day or so. Have changed door switches but to no avail, checked contact (earth) with switch / door frame, seems ok. Am wondering if the relay delay timer has developed an intermitent fault... As it all started functioning normally again, then occasionally the interior light would flicker on whilst driving, later it just stayed on.
I tested each switch by pressing it manualy and watching the light, and at the point at which the delay relay should switch it off it does dim slightly but remains on.
It's frustrating! Can anyone cast any light on the subject??? (slight pun intended) ;)

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,043 Answers

Yes, it sounds like it burned the contact points in the dome light delay. They were never really designed to have the lights left on for that long (and being 13 years old, it has already had some usage before this)
The part you need is PRC9948G (I would double check that with your dealer).
It is the delay courtesy relay.

Posted on Sep 06, 2008

  • tomeasy
    tomeasy Nov 29, 2012

    can you please tell me where is for the interior lights , dimmer relay. i want to replace it but i don`nt know where it is. thank you.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Interior lights stay on


your door switch got stuck open circuit.

Mar 09, 2015 | 2003 Ford Explorer

1 Answer

Honda 2003 element, interior lights don't come on


is it on each door or only one door?
- only 1 door look like it's the switch of the door the trouble

-if it's all doorsyour light can be burn or you switch control can be off!! check where is you interior light you have a little switch with 3 positions OFF, AUTOMATIC AND ON! PLAY WITH AND SEE IF YOUR LIGHT TURN ON! put it in the middle the get full acces!
and on your Dashboard ( on the left side of the steering) you suppose the get a dimmer setting for you Dashboard lights and it control the interior lights too. if you put it too far from the right side you put the interior lights off and your Dashboard lights will be at full range! do the test!

Oct 05, 2014 | Cars & Trucks

1 Answer

How do you make the interior lights to come on


your switch control can be off!! check where is you interior light you maybe have a little switch with 3 positions OFF, AUTOMATIC AND ON! PLAY WITH AND SEE IF YOUR LIGHT TURN ON! put it in the middle the get full acces!
and on your Dashboard ( on the left side of the steering) you suppose the get a dimmer setting for you Dashboard lights and it control the interior lights too. if you put it too far from the right side you put the interior lights off and your Dashboard lights will be at full range! do the test!

only 1 door look like it's the switch of the door the trouble
if it's all doors your light can be burn

Oct 05, 2014 | Cars & Trucks

1 Answer

1999 RR HSE when DS door opens no dome light, Pass side make dome light come on. Also want to change to LED lights, suggestions!


Driver door switch likely not working. Also, some LEDs are not as bright, and may not be dimmable, so be aware

Dec 03, 2013 | 1999 Land Rover Range Rover

1 Answer

Interior lights stay on


either the lights are turned on manually from the headlight/interior light switch, or you have a defective door switch that is telling the module that a door is open, or you have a door that is open, or your module that controls the interior lights is defective. I would start with the simple things, I would make sure all doors are closed. If they are, then check the headlight/interior switch to make sure the interior lights are in the off position, then check all of the door switches. They are simple normally closed push button switches that should be mounted on the car frame near the door hinges.

Sep 24, 2011 | 2000 Jeep Cherokee

2 Answers

Just bought a used 2004 Excursion and the interior lights stay on until the battery wears down. would that be a bad roller switch for interior lights and dash lights?


Well, the lights on our 1998 Ford Taurus stay on for a 'limited' amount of time, say 20 minutes and automatically turn off, even if the door is left open or if the glove box light is left on due to a door left open.

I wonder if your body control computer is faulty in your 2004 Excursion?
Or, if the body control computer is fine, and it doesn't have this feature, then I would see if the door latch switch needs to have wd-40 sprayed on it.

We have a 1999 Ford Expeditioin that had this problem with the door open light going on when the door was actually closed. The tech sprayed wd-40 on the locking mechanism and the problem went away.

Aug 08, 2010 | Ford Excursion Cars & Trucks

1 Answer

BATTERY DRAINS OVERNIGHT


the electric lock solenoid may be stuck on and drawing current as well. Use a test lite to ground and pull the fuse, to see if it goes out. Repeat if nec, on all fuses.

Aug 22, 2009 | 1997 Land Rover Range Rover

3 Answers

Range Rover Passenger Door Will Not Open


I have a 2002 land rover discovery and my passenger front door won't unlock with the interior lock button on the dash or with the key fob. The only way to unlock the door is to pull the handle on the inside of the door. Is the actuator bad?

Please help
Rover2163

Jun 18, 2009 | 1998 Land Rover Range Rover

1 Answer

Eas keeps lighting


eas works with 5 valves,compressor,
compressor works?(in the box left side undernhood,)there is als interferance with dooor switch,if one door open,no position change possible,
the message on dash is eas malfunction?,
opn compressor box,if nor running compresor,shake or slight hit,
reset to 0 position?,shut contact,take off relay for compressor,disconnect wiring on compressor(main,)switch on again,now place back relay,connect again,while contact on,wait some minutes,reset is done,cut contact,on again,and see the for message,

Apr 14, 2009 | 1999 Land Rover Range Rover

Not finding what you are looking for?
1995 Land Rover Range Rover Logo

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...