Question about 1995 Chevrolet Lumina

1 Answer

Starter out trying to get the starter out, not sure if bolt is stripped.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 2,039 Answers

You loosen the bolt and they dont come off there stuck in the starter pull with pliers or let me now whats going on thanks pierre

Posted on Sep 06, 2008

2 Suggested Answers

  • 6982 Answers

SOURCE: The top bolt head was strip on the starter, what kind of tool can I use to get it off?

If metric, try using an American size on it even if you need to hammer it on (within reason) If American size go the other way with a metric socket.

Posted on May 26, 2009

  • 8404 Answers

SOURCE: calgary.cacannot find the right starter

You will probably have to drill and tap the hole. Before you do this ... consider a helicoil repair. http://www.noblefix.com/helicoil.htm

Your mechanic should be familiar with this or similar product.

Thanks for your question today.

Posted on Mar 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Starter spins wont engage drive


Make sure your battery is fully charged and the connections and terminals are all good.
Make, model, year, milage........... all would help with diagnosis.
No info...... I get to guess.....
Possibles_
- stuck bendix
- broken tooth on ring gear
- stripped teeth on starter
- loose starter mounting bolts

Jan 07, 2016 | Cars & Trucks

1 Answer

How do you remove a stripped 6 o'clock bolt on starter


I've never heard this terminology before.
Please try to re-explain.

If you are talking about a location bolt, then you may have to cut the bolt head or nut off with either a saw, or by using heat.

Nov 12, 2012 | 1989 Ford Crown Victoria

1 Answer

Starter will not stay tight, chevy 350


It sounds like the bolt holes may be stripped. Try and put the bolts in without the starter use new bolts and try to pull them out by hand. If you can not it is possible they may be only partly stripped and need the threads cleaned up. Make sure you use the proper size tap. If you still have problems you may need to drill out the bad bolt hole or holes one size larger and re-tap the holes one size larger. This is a big job and you will need larger bolts as well. Depending on the room you have to work with you may have to pull the engine to do a good job. good luck.

Jul 18, 2012 | Cars & Trucks

1 Answer

Calgary.cacannot find the right starter bolt for 93 gmc k2500 6.5 turbo diesel truck first one broke shop fixed it with different bolt shorter and fatter they said something about a rivet too that one is...


You will probably have to drill and tap the hole. Before you do this ... consider a helicoil repair. http://www.noblefix.com/helicoil.htm

Your mechanic should be familiar with this or similar product.

Thanks for your question today.

Mar 02, 2011 | 1993 GMC Sierra K3500

1 Answer

Starter bolt stripped. Helicoil or tap?


Either way ,is a lot of work. First thing I would try is a little bit longer bolt. Take a screw driver and push into the stripped hole to determine how long you can go.Even 1/4 inch more threads might be enough to hold starter secure. A little sealer on threads would be good.. If all that fails ,try to oversize the bolt and retap.Make sure the oversize bolt will go through the starter. I have had good success with J B WELD [brand] to drill and retap. Just make sure the surface is clean

Feb 25, 2011 | 1991 Nissan 300ZX

1 Answer

Remove a starter from a 2005 Toyota highlanderV6


it should be located under the battery and you will have to remove that and should also remove the battery mount, also there should be 2 or 3 bolts that you will need to remove they are either 15mm 0r 17mm, but first disconnect the electrical wiring from the starter and then remove bolts, make sure to use a 6 point socket so you don't strip the bolt,

Mar 25, 2010 | 2005 Toyota Highlander

1 Answer

The starter connection bolt from battery to starter has strip how do i replace it


take a pair of vise grips to turn stripped bolt, is bolt stripped or threads where bolt just turns

Feb 04, 2010 | 1995 Chevrolet Lumina

2 Answers

Is it easy to install a starter on a 1996 ford econoline?


As long as you see it then there should be a couple of bolts and the cable on the terminal and that's all there is to it. Just make sure it's seated right.

Jul 24, 2009 | 1996 Ford Econoline

1 Answer

The top bolt head was strip on the starter, what kind of tool can I use to get it off?


If metric, try using an American size on it even if you need to hammer it on (within reason) If American size go the other way with a metric socket.

May 26, 2009 | 1992 Mercury Grand Marquis

Not finding what you are looking for?
1995 Chevrolet Lumina Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...