Question about 2002 Subaru Impreza

1 Answer

Timing belt I have a crate engine, 2.0 l turbo EJ20, the block idenitfying marks are 07BB 32212 There is an oil leak around th ecam seal. I understand I should replace th etiming belt as I will have it off during the repair. Since i do not know what car the engine came from (Impreza i belive) I don't know what part number to order for the timing belt. thanks, mike lesiecki mlesiecki@gmail.com

Posted by on

  • mlesiecki Sep 08, 2008

    thanks very much, mike

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

The EJ20 should have come out of a 02-05 Impreza WRX.

Posted on Sep 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Mazda Protege 1.6L big oil leak passanger side. No oil in timing belt area. All over firewall & steering rack. What is leaking?


probably gaskets are not sealed properly you have to redo it or try and cleaned it remove all the oil that sorrounds the engine and try to seal with a high temp silicon

Jan 17, 2013 | Mazda 323 Cars & Trucks

1 Answer

Oil leak front engine timing chan


1995 Tracker would have a timing BELT. Normal oil leak points (in order) on a Suzuki G16 engine are the distributor base (rear of motor), valve cover (top of motor), front main seal (behind lower timing belt cog) cam seal (behind the upper timing belt cog) and rear main seal. (behind the flywheel). I'd suspect the front main seal or cam seal. I use foot power to help find oil leaks.

Dec 24, 2012 | 1995 Geo Tracker

7 Answers

Model: '02 Jetta TDI std. ALH 120,000 miles, Recently new timing belt. After exiting the freeway, about a half mile going around 25 mph, we Heard a sudden noise (about the sound LEVEL squeeling brakes or...


The items to check are
Waste gate on the turbo Please email me the turbo model # Example: G3

EGR valve (stuck open or not moving freely) / need to remove carbon in EGR valve (if equipped in emission state / country) Clean EGR passage tube.
REMOVE ALL CARBON with WD-40 or PB Blaster

Check for vacuum leaks.
YOU MUST replace EGR base mount gasket.

Inspect timing belt tensioner.
Jumped timing / belt Check for burn / loose rubber particle on the bottom of the timing belt cover. Recheck timing marks / dots and make sure it's line up correctly.
You should change the water pump and T-belt at the same time. Check the service record for the last water pump change. Spin the water pump and check for free movement and leak.
====
After everything are check out then open the valve cover to do a valve adjustment. You should do valve adjustment every year or 12-18,000 miles.

Monitor for oil leaks from rear main seal,front seal and valmustgo_24.jpgmustgo_2.gifve cover.

Check for white smoke at the tailpipe after 10-15 minutes of warm up time to rule out head gasket damage.
check for cross mix of oil and coolant.
TDI should go well over 200,000 miles before major over-haul.

Jan 24, 2011 | Volkswagen Jetta Cars & Trucks

2 Answers

Change front main seal , leaking oil around timing chain cover. could be seal around harmonica balancer.


yes, I just changed one of these recently. Had to take both front and bottom off engine. Very difficult repair, as there are no good jack points for the engine when you have all the motor mounts off.
Here is procedure I would recommend.
Remove starter and engine to transmission brackets front and back.
Remove transmission starter gear cover.
drain oil and remove oil pan.
put a block under the crankshaft and jack to release weight on motor mount.
remove front motor mount (by serpentine belt)
remove belt.
remove compressor and bracket.
remove crank pulley and vib damper.
remove timing cover. mark timing belt with direction of travel
loosen tensioner gear.
remove timing belt.
remove crankshaft timing gear and key.
remove seal and oil pump housing.
clean gasket surfaces.
replace seal and reverse procedure.

If you have questions, let me know.

Oct 06, 2010 | 1993 Dodge Caravan

1 Answer

My 2001 jeep grand Cherokee will not start don?t know why no codes are coming up put new cam sen, crank sen, coil pack, new ecu, new coolant temp sen, it turns over but will not run has injector pulse and...


Timing Chain, Sprockets, Front Cover and Seal REMOVAL & INSTALLATION 2.5L and 4.0L Engines
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Remove or disconnect the following:
    • Negative battery cable
    • Accessory drive belt
    • Cooling fan and shroud
    • Crankshaft damper
    • Front crankshaft seal
    • Accessory brackets
    • Front cover
    • Oil slinger
  3. Rotate the crankshaft so that the timing marks are aligned. Fig. 1: Timing chain alignment marks — 2.5L and 4.0L engines 7924pg20.gif

  4. Remove the timing chain and sprockets. To install:
  5. For 2.5L engines, turn the timing chain tensioner lever to the unlock (down) position. Pull the tensioner block toward the tensioner lever to compress the spring. Hold the block and turn the tensioner lever to the lock (up) position. Fig. 2: Timing chain tensioner — 2.5L engines 7924pg19.gif

  6. Install the timing chain and sprockets with the timing marks aligned. Tighten the camshaft sprocket bolt to 80 ft. lbs. (108 Nm) for 2.5L engines or to 50 ft. lbs. (68 Nm) for 4.0L engines.
  7. For 2.5L engines, release the timing chain tensioner.
  8. Install or connect the following:
    • Oil slinger
    • New front crankshaft seal to the front cover
    • Front cover, using a new gasket
    • Timing Case Cover Alignment and Seal Installation Tool 6139 in the crankshaft opening to center the front cover Fig. 3: Timing Case Cover Alignment and Seal Installation Tool 6139 — 2.5L and 4.0L engines 7924pg21.gif

  9. Tighten the front cover bolts as follows:
    1. Step 1: Cover-to-block 1⁄4 inch bolts to 60 inch lbs. (7 Nm)
    2. Step 2: Cover-to-block 5⁄16 inch bolts to 16 ft. lbs. (22 Nm)
    3. Step 3: Oil pan-to-cover 1⁄4 inch bolts to 85 inch lbs. (9.5 Nm)
    4. Step 4: Oil pan-to-cover 5⁄16 inch bolts to 11 ft. lbs. (15 Nm)
  10. Install or connect the following:
    • Accessory brackets
    • Crankshaft damper. Tighten the bolt to 80 ft. lbs. (108 Nm).
    • Cooling fan and shroud
    • Accessory drive belt
    • Negative battery cable
  11. Start the engine and check for leaks.

Jul 30, 2010 | 2001 Jeep Grand Cherokee

2 Answers

I have a 1999 Volkswagen Passat wagon 1.8L Turbo and it has almost 100,000 miles on it, I have a few problems that I haven't been able to find answers for. 1. Sluggish acceleration -i have changed the...


Have your cam seals checked. Cam seals are a big problem on these cars and a major source of oil leaks. Another source is the oil cooler gasket but that doesn't appear to be the issue here as your leaks are well above the oil cooler. Good Luck.

Oct 08, 2009 | 1999 Volkswagen Passat

1 Answer

Timing belt timing marks, 1997 ford escort where are they?


Ford Escort/Tracer 1991-1999 Repair Guide

REMOVAL & INSTALLATION 1.8L Engine

(see Figures 1, 2, 3 and 4)
  1. Disconnect the negative battery cable.
  2. Remove the timing belt covers.
  3. Rotate the crankshaft and align the timing marks located on the camshaft pulleys and the seal plate.
  4. Remove the crankshaft pulley and hub.
  5. If the timing belt is to be reused, mark an arrow on the belt to indicate its rotational direction to enable correct re-installation.
  6. Loosen the timing belt tensioner lockbolt and remove the timing belt.
To install:
  1. Temporarily secure the timing belt tensioner in the far left position with the spring fully extended, then tighten the lockbolt.
  2. Make sure the timing marks on the timing belt pulley (crankshaft sprocket) and the engine block (oil pump housing) are aligned.
  3. Make sure the timing marks on the camshaft pulleys and the seal plate are aligned.
  4. Install the timing belt.
  5. Loosen the tensioner lockbolt. Using a suitable prying tool, position the timing belt tensioner so the timing belt is taut, then tighten the tensioner lockbolt.
  6. Turn the crankshaft two turns clockwise and align the timing belt pulley mark with the mark on the engine block.

fbe49f2.jpg
Fig. 1: Timing marks are located on the camshaft pulleys as shown-1.8L engines

5bb74d0.jpg

Fig. 2: Make sure that the crankshaft sprocket (timing belt pulley) and oil pump timing marks are aligned-1.8L engines

9cafc26.jpg

Fig. 3: Align the timing belt pulley mark with the tension set mark, at approximately the 10 o'clock position-1.8L engines

72dc9cd.jpg
Fig. 4: Check the timing belt deflection at the location shown-1.8L engines

  1. Make sure the camshaft pulley marks are aligned with the seal plate marks.
If the timing marks are not aligned, remove the belt and repeat the procedure.


I hope help you with this; remember rated this help. Good luck.

Sep 11, 2009 | 1997 Ford Escort

1 Answer

I accidently removed the cam belt without marking it. i have a 1991 legacy ej20 non turbo quad cam and wounder if anyone had the timing mark diagram i could use to help line everything up. cheers


As long as the timing marks on the cams are lined up with the marks on the head ( And the crank is lined up as well - marks on the block - TDC) then the belt should be lined up correctly, however, if you do need the marks, a new belt should have them and they aren't too terribly expensive - ($25.00) - You could also take your belt and a little bottle of white touch up paint (Or magic marker you can see)to the parts store and transfer the marks from a new belt to your old belt, but if it had any miles on it ( 10K+) I'd go ahead and replace it if I were in there that far...-

Aug 22, 2009 | Subaru Legacy Cars & Trucks

1 Answer

2001 Volvo s40 oil leaking in turbo, smokes white smoke and turbo not kicking in. I have a new head, timing belt waterpump, oxygen sens. valve job, cam pulley all changed. It is still smoking and no turbo....


Water in combustion chamber makes white smoke--suspect that the head gasket is leaking water into the chamber. If oil leaking around turbo, it may have a bad bearing and bad oil seal. Check waste gate valve and control.

Aug 01, 2009 | 2001 Volvo S40

1 Answer

My timing belt broke on my '99 Ford Escort ZX2. Please tell my husband how to replace it. Than k you



 
 
Timing Belt
REMOVAL & INSTALLATION
1.8L Engine
Disconnect the negative battery cable.
Remove the timing belt covers.
Rotate the crankshaft and align the timing marks located on the camshaft pulleys and the seal plate.
Remove the crankshaft pulley and hub.
If the timing belt is to be reused, mark an arrow on the belt to indicate its rotational direction to enable correct re-installation.
Loosen the timing belt tensioner lockbolt and remove the timing belt.
To install:
Temporarily secure the timing belt tensioner in the far left position with the spring fully extended, then tighten the lockbolt.
Make sure the timing marks on the timing belt pulley (crankshaft sprocket) and the engine block (oil pump housing) are aligned.
Make sure the timing marks on the camshaft pulleys and the seal plate are aligned.
Install the timing belt.
Loosen the tensioner lockbolt. Using a suitable prying tool, position the timing belt tensioner so the timing belt is taut, then tighten the tensioner lockbolt.
Turn the crankshaft two turns clockwise and align the timing belt pulley mark with the mark on the engine block.
Fig. 1: Timing marks are located on the camshaft pulleys as shown — 1.8L engines


 
Fig. 2: Make sure that the crankshaft sprocket (timing belt pulley) and oil pump timing marks are aligned — 1.8L engines


 
Fig. 3: Align the timing belt pulley mark with the tension set mark, at approximately the 10 o'clock position — 1.8L engines


 
Fig. 4: Check the timing belt deflection at the location shown — 1.8L engines

Mar 28, 2009 | 1999 Ford Escort

Not finding what you are looking for?
2002 Subaru Impreza Logo

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...