Question about 2005 Isuzu Ascender

1 Answer

Brake Lights the brke lights on my 2005 isuzu ascender quit working. I checked all fuses and the bulbs all other lights are working.

Posted by on

  • Anonymous Mar 30, 2014

    Speedometer will work when car is first started but after driving will go out. Most of the time will drop below zero but last night stuck on 55mph. Does not seem to be any particular activity that causes it, just goes out.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 958 Answers

It could be your brake light switch. it is located underneath the steering column, where you step on your brakes. it is bolted on a nut and being pressed upward by the brake pedal if your not stepping unto it. once you step on the pedal, it would be released and make contact to light up your brake light.

tnx 4 using fixya.


Posted on Sep 06, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My tail lights on a 2004 Isuzu Ascender aren't working. Where would that fuse be located at

Depends on which specific lights you are referring too ..parking lights or brake lights? If parking lights then are the front ones working? If they are then it's not thefuse as they are all on the same circuit

Sep 10, 2016 | 2004 Isuzu Ascender

1 Answer

How replace smog pump in 2005 Isuzu Ascender

How do you know the pump is defective, what is the code?

Aug 31, 2014 | 2005 Isuzu Ascender

1 Answer

Ascender radio fuse location

radio fuse is located under driver side dashboard mounted on firewall or in-line behind the radio mount.

Jun 08, 2014 | 2005 Isuzu Ascender

1 Answer

2005 S Isuzu Ascender Speedometer niddle moved all the way to the right of gage and as not moved.

If the odometer is working correctly, the problem is inside the speedometer head.
The speed sensor would be on the side of the transmission if the odometer is not working.

Apr 07, 2013 | 2005 Isuzu Ascender S

1 Answer

Low beam lights went out.... All fuses and bulbs are ok, what could be the issue

headlight relay.

Please see my tip at . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Oct 07, 2010 | 2005 Isuzu Ascender

2 Answers

Hello, I have 2004 ascender my low beam lights are not working but my high beams are working. I have check both fuses. Please help me find a solutions.

test fuse 3y6 10amp if they are well test the relay headlamp that is in the driver modulates relay 46. If this is well the problem this in the body control modulates

Jan 01, 2010 | 2004 Isuzu Ascender

1 Answer

Low beam not working

check the low beam relay in the engine compartment fuse panel near the battery

Apr 06, 2009 | 2004 Isuzu Ascender

1 Answer

Headlamp bulb replacement

well if its the front bulb yopu need to take off the bumper first it should be quite easy if you try it their are retainers up top and retainers on the bottom and 2 bolts on each fender at bumper slide off then pull out lamp.

Jan 24, 2009 | 2005 Isuzu Ascender

1 Answer

How to replace climate control light

Have You checked the fuses first?

Jan 21, 2009 | 2005 Isuzu Ascender

2 Answers

Headlight change

it is actually quite easy and it will not require tools, but you have to remove the entire headlight assembly.

Open the hood and as you look at the top of the headlight assembley you should notice two tabs, you will need to pull these up and then remove the assembly. Once it is out you will be able to unplug the wires from the lights and then remove the bulb.

Replace the bulb, the wires and then reassemble, make sure that the tabs are pressed all the way down once finished and you are done

Oct 09, 2008 | 2005 Isuzu Ascender

Not finding what you are looking for?
2005 Isuzu Ascender Logo

Related Topics:

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

77947 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14405 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides