Question about 1996 Saturn SL

1 Answer

95 Saturn SL2 with 1.9 engine

Check Engine Soon came on. Attached my INNOVA 3010. DTC code Po708 came back. Can't find code listed in my Chilton book. Any ideas?
Thanks to All in advance. This is my first time here and it is good to know you guys are out there for us.

Albert

Posted by on

  • 47 Cowboy Sep 06, 2008

    Hope to get a response but if not will join the pay site. Thanks to all.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 231 Answers

P0708 for your Saturn is , transmission range sensor circuit high input
Hope this helpfull to you, and that you take the time to rate this response.

Posted on Oct 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have innovia obd scaner 3100,but it can't diagnos actros. it say there is no dtc in the computer. what can i do?


Daniel, According to the instructional video below, the code reader is not listed to work on your vehicle, only OBD2 compliant vehicles Domestic, Asian, European sold in United States. Before purchasing another code reader or scan tool make sure it will work and diagnose codes for your vehicle, contact the manufacturer if need be for info. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Innova 3100 Instructional Video
http://www.ebay.com/bhp/mercedes-scanner
https://answers.yahoo.com/question/index?qid=20131225111930AAcMz1v
Mercedes Benz DTC Fault Code List

Jul 08, 2016 | Cars & Trucks

1 Answer

95 sl500 check engine light reset and comes back on after it sits over night. any idea?


What code is it throwing ? Some codes are what are called two trip codes ! You clear the codes an start an drive the vehicle ,no check engine light . Park the vehicle over night an bam next time you start an drive the vehicle the check engine light comes back on .

??There are two types of DTC's, 1 trip DTC's and 2

trip DTC's

??A 1 trip DTC is for a condition that requires

immediate attention such as a catalyst damaging

misfire.

??A 2 Trip DTC is one that a condition must be found

during 2 consecutive trips such as an EGR fault.

??Most Monitors do not set a DTC and light the MIL

when a vehicle fails a test for the first time during a

DRIVE CYCLE. If a test is failed on a second

consecutive DRIVE CYCLE the MIL will light and a

DTC is stored in the vehicles powertrain control
module (PCM).

Feb 07, 2016 | Cars & Trucks

2 Answers

I got a new battery and a new starter on my dodge grand caravan and my van gave me a code reading p0513 my key is not getting no signal and it's not starting my car I don't no what's the problem


The Internet, though, has a large number of web sites where
you can buy service manuals and schematics from bookstores,
publishers, and other collectors. Here is just a sampling of
what sites are out there:

Chilton Repair Manuals

http://www.chilton.cengage.com/

Haynes Publishing
Haynes auto manuals

http://www.haynes.com/

Factory Automanuals
http://www.factoryautomanuals.com/

Vintage Books
Vintage books com Rare used and out of print books

http://www.vintage-books.com/

AutoLit
http://www.autolit.com/home.htm

Jan 13, 2016 | Dodge Cars & Trucks

2 Answers

Diagnostic port on a 1994 jeep grand Cherokee limited v 8


Check the fuel filter,nozzles and clean the injector mouth

Nov 24, 2015 | 1994 Jeep Grand Cherokee

1 Answer

It's a 1995 Saturn sl the clutch on ac compressor kicks on with direct power the engine fan also changed relays still get the code 26 quad drive modal need some help


This info is from 1998 Saturn Sl , my service info doesn't go to 95 . It's the same except for code numbers , My info is P0xxx #'s . The quad driver is part of the ECM - engine computer !
Here is a description from Saturn service info .
A quad driver module (QDM) is an electronic switch which completes a ground circuit when switching ON. The QDM independently controls 4 separate outputs. A load is connected between battery voltage and the QDM allowing the QDM driver to control the output. Each QDM has fault detection logic which compares QDM driver input and output voltages. The logic expects to measure less than 3 volts when the QDM driver is ON and greater than 7 volts when OFF. The QDM has only one fault line that will detect a fault on any of the 4 outputs. The scan tool can be used to cycle the outputs ON or OFF. The scan tool can also perform an automated test which can isolate the faulty circuit.
The quad drive it self may be bad , GM had a problem with these !
Did you check fuse's ?
Conditions for Setting the DTC
DTC P01650 and/or P1651 will set if:
?€¢
There is an open, short to ground or short to voltage on any of the QDM output circuits


?€¢
MIL (SERVICE ENGINE SOON) telltale circuit


?€¢
Upshift lamp circuit


?€¢
Cooling fan relay circuit


?€¢
A/C relay circuit


?€¢
Fault detected for 5 seconds for DTC P1651. Fault detected for 20 seconds for DTC P1650.

Important: The QDM circuit is continuously checked when the engine is running.

May 18, 2015 | 1995 Saturn Sl

2 Answers

93 Jeep Grand Cherokee, no spark from ignition coil


so gue$$ stinks sure.... why do that.?
all it takes is a scan tool to find this.

first you need to learn ASD relay rules.
to start a jeep 1993 to NOW.
the ASD most close, cranking,does it?
and most stay closed cranking and NOT drop out in 3 seconds.
that means crank for 5 seconds and if the ASD drops. at 3.?
easy huh?
if it did DROP i can tell you the ECU will set DTC errors you failed to see because you did not scan it during those 5 seconds.

http://www.fixkick.com/Jeeps/ASD.html

first is fuses.
lets make a list. works on all jeeps 93+
  1. battery changed. to 12.6vdc reseted.
  2. keyon, CEL lamp glows, if not fuse blown to PCM (ECU)
  3. engine cranks fast.
  4. Asd realy pulls in and holds.
  5. scan tool shows, what? BINGO. DTC errors, easy huh?
  6. ok no DTC, errors, live for 5 seconds, cranking,so lost spark? must be bad coil or wired wrong. (change it 1 wire at a time?ooops)
  7. coil dead, its not DTC caused, so if no DTC that means the PCM did not see Coil ignitor errors. to coil see? i bet its got TDC;s if not then i check the coil inputs. to be sure the PCM ignitor is firing the coil correctly with my scope, oops no scope.
  8. if no scope you get to buy a new PCM. Wild guessing bad ignitor.
  9. i use a Innova 3140 scan too that does 93-95 jeeps, for about $150 only about 1.5 hrs shop labor value. and is Investment grade tool, it would have saved you 3 parts, guessed already.

Mar 18, 2015 | 1993 Jeep Grand Cherokee

4 Answers

Having trouble keeping truck cranked while driving. changed fuel pump and filter and just recently changed crank sensor which worked for awhile and then same results before it was changed. it seems as the...


If the crank sensor solved the problem before it may have gone bad already , I would start with that. Fuel pressure on a 95 grand needs to be 37 to 41 psi. Check to make sure you have adequate pressure . You may also want to test your Idle air control valve and Throttle position sensor to insure proper operation.

Jan 26, 2015 | 1995 Jeep Grand Cherokee

1 Answer

My saturn vue is bogging down when i give it gas like it is starving for fuel ?


Start with the simple and replace your fuel filter, air filter and clean your MAF sensor. You can buy and MAF sensor cleaner at Auto Zone and the fuel filter also. While your there Auto Zone can scan your Saturn for any DTC codes that my be causing your engine performance issues, Auto Zone scan free of charge and if there is any DTC codes. They can give you the information to what needs to be done to get your Saturn running 100% again soon.
Thank you for using fixya and good luck. Keep me posted.

May 17, 2010 | 2003 Saturn VUE

1 Answer

2000 Saturn LS Service Engine Soon Light


codes are for fuel system lean bank 1 and 2. low fuel pressure or innacurate mass air flow sensor could cause this. most common is mass air flow sensor.

Feb 20, 2009 | 2001 Saturn S-Series

Not finding what you are looking for?
1996 Saturn SL Logo

Related Topics:

404 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...