Question about 1995 Dodge Intrepid
When I turn the ignition on and I don't have all dash lights then the car won't shift out of low gear. This dosen't happen every time. Can anyone help me with this?
The Ignition switch is in the steerng wheel cover, it controls everything to start her up. Mines gave me the same problem for awhile and a whirl.There are sensors for transaxle, if the switch doesn't fix the shift completely change the fluid and filter and sens..
Posted on Nov 08, 2008
the transmission has problems. as a fault with it it will automaticly switch into second, but wont come out to prevent any more damage that can be caused. it will still drive and the reverse gear should work, but take it to a mechanic or even a dealer ship, or live with the 45mph. but the transmission has probally went out.
Posted on Mar 15, 2009
two issues here. this may be a low fluid issue. i would check the level of the fluid first. the next issue could be a blown shift solenoid. these are located inside of the transmission pan.also, check the filter as well.(transmission filter could be clogged)
Posted on Mar 16, 2009
I believe that the cable has to be adjusted. Most cases, the cable adjustment is off. Worst case senario, is the bushing in tranny is worn out.
Posted on Jun 22, 2009
im not 100% but i think that truck has a hydraulic clutch. if it does for sure then check the fluid level if its a cable or linkage type then it may be out of adjustment. Ether way (low on fluid or out of adjustment) the clutch may not be fully disengaged while your trying to shift. Start there before getting to far into it.
Posted on Mar 11, 2010
Tips for a great answer:
Jun 08, 2015 | 2000 Dodge Intrepid
Jun 10, 2013 | Cars & Trucks
Jan 23, 2013 | 2001 Dodge Intrepid
Jul 20, 2011 | Dodge Intrepid Cars & Trucks
Jun 08, 2011 | 2000 Dodge Intrepid
Jan 10, 2011 | 1995 Dodge Intrepid
Dec 01, 2009 | 2000 Dodge Intrepid
Jul 18, 2009 | 1995 Dodge Intrepid
Jan 15, 2009 | 1995 Dodge Intrepid
185 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: