Question about 2000 Oldsmobile Alero

2 Answers

Alero power steering pump

How do you remove the pulley off of the power steering pump of a 2000 alero 6 cycl.

Posted by on

  • Danialee Mar 19, 2009

    What kind of tool?

  • Anonymous Mar 20, 2014

    need a diagram for a power steering pump pulley

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Most auto parts store have the tool to lend ( auto zone ), its free.

Posted on Mar 20, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Oldsmobile Master
  • 2,039 Answers

You need a special power stering puller

Posted on Sep 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Video of replacing power steering pump 2000 Pontiac montanspa


Pontiac Grand Am/ Olds Alero 3.4 liter powersteering pump ...

? 16:26
https://www.youtube.com/watch?v=fhOaJUAgPTA
Jan 6, 2014 - Uploaded by JoeTheAutoGuy
this is a video on how to replace a power-steering pump on the Gm 3.4 ... My 2000 Olds Alero (2.4) power steering pump itself is fine, but the ...

How to Replace Power Steering Pump GM 3800 - YouTube

? 19:45
https://www.youtube.com/watch?v=-T8Kek90qAA
Sep 28, 2014 - Uploaded by Rich Rodgers
How to replace the power steering put on General Motor 3800 Engine. ... Sign in to add this video to a playlist. ... Power Steering Pump Pulley Removal and Installation ACDelco - Duration: 6:25. by MyPartsGarage 136,263 views ... How to replace a power steering rack and pinion on a 2005 Pontiac Grand ...

How to Install the Power Steering Pump - AutoZone Car ...

? 6:27
https://www.youtube.com/watch?v=PMX-dBhgwlo
Apr 19, 2012 - Uploaded by AutoZone
How to Install the Power Steering Pump - AutoZone Car Care ...Power Steering Pump Replacement 2000-2006 Chevrolet Tahoe, Suburban, ...

How to replace your power steering pump - YouTube






Dec 28, 2015 | Pontiac Cars & Trucks

1 Answer

Changeing a power steering pump


CHANGING POWER STEERING PUMP YOU HAVE TO PLACE A DRAIN PAN UNDER THE VECHICLE. SIPHON OUT POWER STEERING FLUID WITH A SIPHONER DONT USE YOUR MOUTH TO SIPHON SWALLOWING POWER STEERING FLUID CAN BE FATAL MAKE YOU SICK.WHEN ALL POWER STEERING FLUID IS REMOVED FROM POWER STEERING PUMP.REMOVE DRIVE BELT.THEN REMOVE THE POWER STEERING PUMP.THEN YOU HAVE TO REMOVE THE POWER STEERING PUMP PULLEY THE NEW POWER STEERING PUMP DONT HAVE A PULLEY YOU HAVE TO HAVE REMOVE PULLEY FROM THE OLD POWER STEERING PUMP.YOU NEED A PUMP PULLEY REMOVER AND A PULLEY INSTALLER.YOU CAN TAKE OLD POWER STEERING PUMP AND NEW POWER STEERING PUMP TO A MACHINE SHOP.THEY WILL REMOVE PULLEY OFF OLD PUMP PRESS IT ON NEW POWER STEERING PUMP.THAT WOULD BE CHEAPER THAN BUYING THE PULLER AND INSTALLER.GO TO AUTO PARTS STORE BUY NEW HIGH PRESSURE LINE O RING GOES TO PRESSURE LINE GOING INTO POWER STEERING PUMP.ONCE YOU GET NEW PUMP READY PULLEY BEEN PRESSED ON.TAKE POWER STEERING PUMP HOME PUT IT ON. BLEED POWER STEERING SYSTEM.WHAT YOU DO WHEN YOU GET NEW PUMP INSTALLED HIGH PRESSURE LINE IN PLACE.PUMP BOLTED IN DRIVE BELT ON POUR POWER STEERING FLUID IN POWER STEERING PUMP UNTIL FLUID LEVEL STOP DROPPING AND YOUR LEVEL ON POWER STEERING DIP STICK AT COLD LEVEL.NOW START CAR UP LET IT IDLE FOR 3 MINUTES.THEN TURN OFF ENGINE CHECK POWER STEERING FLUID IF FLUID LEVEL DROP ADD LITTLE MORE UNTIL LEVEL ON DIP STICK ON COLD MARK DONT OVER FILL.NOW SAFELY RAISE SUPPORT FRONT OF VECHICLE. START THE ENGINE.TURN STEERING WHEEL FROM ALL THE WAY FROM LEFT TO RIGHT DONT STOP LOCK WHEEL .GO LEFT TO RIGHT SEVERAL TIMES.THEN TURN OFF ENGINE CHECK FLUID LEVEL.IF ALL IS GOOD LET VECHICLE BACK DOWN LET IT SIT FOR A WHILE CHECK FLUID AGAIN.DONT DRIVE VECHICLE IF POWER STEERING PUMP MAKE NOISES OR YOUR STEERING FEEL STIFF HARD TO TURN.JUST MAKE SURE FLUID LEVEL RIGHT AND DRIVE BELT TIGHT GOOD LUCK.

Nov 02, 2010 | 1999 Oldsmobile Alero

1 Answer

Cant find were to put powersteering fluid


Power Steering Pump Removal & Installation 3.8L Engine To Remove:
  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Place a drain pan under the vehicle.
  3. Remove the accessory drive belt from the power steering pump pulley.
  4. Raise and safely support the vehicle.
  5. Remove the right front tire and wheel assembly.
  6. Remove the hoses from the power steering pump.
  7. Remove the mounting bolts and the power steering pump from the engine.
  8. Remove the reservoir and pulley from the pump if necessary.
To Install:
Power steering pump removal/installation (3.8L engine) gm-08-38-480.gif

  1. If removed, install the power steering pump reservoir and pulley on the power steering pump.
  2. Position the power steering pump to the engine and install the mounting bolts. Tighten the bolts to 25 lb ft (34 Nm).
  3. Install the pressure and return hoses to the pump.
  4. Install the right front tire and wheel assembly.
  5. Lower the vehicle.
  6. Install the accessory drive belt.
  7. Fill and bleed the power steering system.
  8. Inspect the system for leaks.
  9. Remove the drain pan from under the power steering pump area.
3.4L Engine To Remove:
  1. Place a drain pan under the power steering pump.
  2. Remove the coolant reservoir.
  3. Remove the pulley from the power steering pump.
  4. Remove the wiring harness near the power steering pump and place it out of the way.
  5. Disconnect the fluid hoses from the power steering pump.
  6. Remove the mounting bolts from the power steering pump and remove the pump.
To Install:
Power steering pump removal/installation (3.4L engine) 88008g71.gif

  1. Position the power steering pump assembly to the engine and install the mounting bolts. Tighten the mounting bolts to 25 lb ft (34 Nm).
  2. Install the wiring harness in its original position.
  3. Install the pulley on the power steering pump.
  4. Install the coolant reservoir.
  5. Fill and bleed the power steering system.
  6. Inspect the system for leaks.
  7. Remove the drain pan from under the power steering pump.
prev.gif next.gif

Sep 18, 2010 | 2000 Chevrolet Impala

1 Answer

How do I remove the pulley on the power steering pump


You need a power steering pump pulley remove/ install tool .
http://www.youtube.com/watch?v=YrIGsbSNz6U
http://www.youtube.com/watch?v=ujslj-830ck

Jul 29, 2010 | 2000 Oldsmobile Intrigue

1 Answer

I have a olds alero. I just replaced the pulley and power steering pump. after I replaced it and put back the hoses and belt. I turned my car on and got a loud grinding noise and some smoking out from the...


seems like the pressure line to the rack&pinion is plugged.open the line at the rack see if fluid flows if not replace line if fluid flows then replace the rack.

Jan 14, 2010 | 2000 Oldsmobile Alero

1 Answer

Smoking and grinding in new power steering pump


did you press the pullye back on the right direction? or beat it on with a hammer which i wouldnt advise i have seen that done a few times and it drives the shaft and bearings out the back side of the pump pretty much destroys it.. if the pulley is on back wards then remove it with a puller and turn it around

Jan 14, 2010 | 2000 Oldsmobile Alero

1 Answer

Need to replace the power steering pump and am not sure what all is involved on a 2000 Alero


The biggest thing is you have to have a special pulley puller and installer tool. You can usually rent them from an auto parts store. Other than that it's just the oil lines and some bolts. You may want to make sure there is a diagram, as to how the belt goes before you remove it. Take a picture of it, or make your own diagram.

Jan 04, 2010 | 2000 Oldsmobile Alero

2 Answers

Power steering pump / pulley removal?


go to autozone and but you a powersteering pump pulley remover or you can rent it for free, you have to take the pulley off before removing the pump

Jan 02, 2010 | 2000 Dodge Durango

1 Answer

Is it hard to change a 98 Olds Intrigue power steering pump for someone who's not a mechanic? We knew the pump was going but were waiting for money to replace. Then when refilling the fluid one day and...


Power Steering Pump Replacement

Removal Procedure
  1. Place a drain pan under the vehicle.
  2. Remove the fuel injector site shield.
  3. Remove the power steering pump pulley from the power steering pump.
spacer.gif 2008-08-27_145449_diag1.thumb.gif spacer.gif spacer.gif View Full Image spacer.gif 4. Remove the power steering pump pressure hose (1) from the power steering pump.

5. Remove the power steering pump return hose from the power steering pump.
2008-08-27_145520_diag2.gif6. Remove the power steering pump mounting bolts.

7. Remove the power steering pump.
spacer.gif 2008-08-27_145611_diag1.thumb.gif spacer.gif spacer.gif View Full Image spacer.gif 8. Remove the power steering pump reservoir from the power steering pump.

Installation Procedure
  1. Install the power steering pump reservoir to the power steering pump.
spacer.gif 2008-08-27_145711_diag1.thumb.gif spacer.gif spacer.gif View Full Image spacer.gif 2. Install the power steering pump to the vehicle. Notice: Refer to Fastener Notice in Service Precautions.

3. Install the power steering pump mounting bolts. Tighten the power steering pump mounting bolts to 25 Nm (18 ft. lbs.).
spacer.gif 2008-08-27_145739_diag2.thumb.gif spacer.gif spacer.gif View Full Image spacer.gif 4. Install the power steering pump return hose to the power steering pump.
spacer.gif 2008-08-27_145822_diag1.thumb.gif spacer.gif spacer.gif View Full Image spacer.gif 5. Install the power steering pump pressure hose (1) to the power steering pump. Tighten the power steering pump pressure hose to 30 Nm (22 ft. lbs.).

6. Install the power steering pump pulley to the power steering pump.

7. Install the fuel injector site shield.

8. Bleed the power steering system. You can do this by removing the power steering fluid cap and lifting the front of the vehicle with jack stands. Turn the engine on and turn the steering wheel slowly lock to lock. This will take 5-10 minutes as you will see the power steering fluid foam up. This is bleeding the air out of the system.

9. Inspect the power steering system for leaks.


Nov 03, 2009 | 2000 Oldsmobile Intrigue

1 Answer

2000 monte carlo how to replace water pump.last bolt


there should be holes in power steering pump pulley that when positioned correctly the bole should go through one of those holes, if not then you have to remove the pump

Apr 29, 2009 | 2004 Chevrolet Monte Carlo

Not finding what you are looking for?
2000 Oldsmobile Alero Logo

Related Topics:

1,319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...