Question about 1995 Isuzu Pickup

1 Answer

1995 Isuzu Pickup Signal/Hazard/Brights switch problems

Hello, I've removed the signal switch in an effort to fix a blinker and hazard problem.. On the hazard I found the ball bearing floating around in there but might have popped loose on disassembly, I put it back together after cleaning and did something wrong not sure where that bearing is supposed to go and the clear clip that screws on right there does that go under or over the electrical board..
Another more important problem is while taking the electrical board off of the brights switch I looked away and saw in my periferral vision a small part fly away.. I know now that whatever that piece was it is what makes KEEPING your brights on possible, because now I have to hold the blinker lever to keep them on.. Is there a diagram of this small switch available I might find the piece if I knew what I was looking for.. thanks for any info.. -Joe xomojo@aol.com

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 314 Answers

Don't even go there! Go to a wrecker and buy another switch. Had one like this that had an eye-lash hair that stuffed it up! But you have went too far now for a simple fix! Frankster016

Posted on Oct 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Right side turn signal switch does not work/blink?


hi

there is usually a turn signal relay under the dash that clicks when you turn left and right you may need to replace it they wear out over time
25718368-m35oz4jvdfvvmght4a51n0jl-2-0.jpg cheers

May 28, 2015 | 1992 Isuzu Rodeo

1 Answer

1985 Dodge pickup. Turn on blinkers they all flash.


i belive the problem is in your steering colum where your signal switch is remove the steering wheel and check the switch if thats not it then you have 2 bare wires touching

Jun 09, 2012 | 1985 Dodge Pickup 4WD

2 Answers

I have a 1995 grand prix Blinkers dont work but, other lights do.


First check turn signal fuse and relay if, they are good then try pressing on and off the hazard switch while turning the signal switch on.If signals start to work replace hazard switch.If hazard switch is good then replace turn signal switch.

May 02, 2011 | 1995 Pontiac Grand Prix

2 Answers

Turn signal doesn't come on until I hit my hazard light on & off


it could be duel filament bulb that is blown and shorting inside the bulb to the other circuit, you may need to remove all indicator and hazard bulbs and check. I would also try a new flasher can

Apr 17, 2010 | 2003 Chevrolet Impala

2 Answers

07 Canyon Blinker issue


When one side blinds faster than the other, the side than blinks faster means a light bulb burnt or not making contact. Are u sure the hazard light are the same with the blinkers

Jul 24, 2009 | 2007 GMC Canyon Crew

1 Answer

Turn signal lights not working


Hi...
The problem you have in your Malibu.
The common problem for this is the Turn and Hazard Flasher, This part is incorporated in the Hazard Switch.

Read this post for a same problem.
http://www.fixya.com/cars/t1042984-2000_chevrolet_malibu_turn_signal

I hope this help on your probem.
Is the same flasher for 00 to 04 Malibu.

Oct 14, 2008 | 2002 Chevrolet Malibu

1 Answer

1992 isuzu pick up


It is usually near the hazard flasher an looks the same.

Aug 26, 2008 | 1995 Isuzu Pickup

6 Answers

Brake lights and turn signals


I had this same problem on a 1995 Lincoln Towncar -- thought I might have to replace the Signal Switch - then it was suggested to check the ground for this wiring. However I was told to check the HAZARD SWITCH. The Hazard Switch was not On or Off it was stuck in the middle. Simply pushing it up and down correct the problem. I was also told that maybe a little WD40 on the HAZARD SWITCH might help.

This is an easy try me first fix. It worked for me and cost 0.

Jun 19, 2008 | 1996 Lincoln Town Car

Not finding what you are looking for?
1995 Isuzu Pickup Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...