Question about Nissan Pulsar

1 Answer

Having problems with gearbox on et turbo. Its hard to get into gear and seems to chug and its really jerky in first and second.

Posted by on

  • Robert Dunlap May 11, 2010

    when does the clutch pedal start to grab. There should be no more than 2 -2 1/2 inches from floor. Is there any smell to the clutch? there could be oil leaking onto it. Make sure the reservior
    is full.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

MY 1983 280ZX WITH 5 SPEED MANUAL TRANSMISSION IS SLIPPING AFTER CAR IS ROLLING. EXAMPLE: YOU CAN BE IN 5TH GEAR AT 55 AND GIVE IT GAS AND THE RPM GO UP ON THE MOTOR BUT IT TAKES A SECOND OR TWO BEFORE THE TRANSMISSION GRAPS. FILL LIKE YOUR IN A AUTOMATIC TRANSMISSION CAR. ANY IDEA?

Posted on Nov 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil and water mixing in the gearbox


Your car must have a leaking gasket. Please let it check by a tech, to avoid more damage.

Mar 23, 2015 | 2006 Audi A4 1.8

1 Answer

Why the gearbox can easily change the drive gear?why the 5th gear stop to drive?


first pull the fill plug and check the oil level if low add some if not then it's a bigger problem and you need to take it in.

May 09, 2014 | 1988 Toyota Land Cruiser

1 Answer

2003 vw golf tdi 6 speed gearbox no first or reverse


Hi, im having a similar problem with my Bora 1.9 tdi 6 speed manual.

1st and reverse get stuck (occasionally) and i am having to almost force it out. Any ideas?

Oct 21, 2011 | Cars & Trucks

1 Answer

2002 Saturn Vue automatic. upon acceleration it makes really bad sounds like a sewing machine "chug-a-chug-a-chug-a-chug" and very fast. It seems to lack power when accelerating. When the vehicle is up...


I had a similiar problem and actually my gear changer in the car was getting hard to move and eventaully stuck.turns out the gear changer was only moving the gears part way and created a wierd sound.Anyway my mechanic found a new gear changing mechanism and installed it .Since then no problems---thank God.

Aug 15, 2010 | 2002 Saturn VUE

1 Answer

Tranny problem 1st gear wont work really and its hard to get 2nd gear but 3rd,4th,and 5th work fine plus reverse works fine. do i need to replace the clutch? or is it sumthing else that wont let me get in...


There is problem in the gearbox.The sincronizers for a first & second gear are on the same gearswitch.Need to change them.Forget about the clutch.

May 16, 2010 | 1998 Volkswagen Jetta

1 Answer

Tranmission shift problem


Check the gearbox filter, it may require replacing.
Its inside the gearbox below , remove the (gearbox)sump and you will notice it.

May 15, 2009 | 2000 Chrysler Sebring

2 Answers

Hard to get out of third gear and have lost fourth


your three-four synchro or you need a new clutch, hope it's the clutch, the synchro will cost alot

Dec 25, 2008 | 1993 Mitsubishi Mighty Max

1 Answer

Gearbox sometimes take a while to go into drive


if it is hard to shift when the vehicle is cold chances are that the oil in the gear box is too thick take it to a shop and try using a thinner oil than what is in the gear box and this will eradicae your problem

Dec 02, 2008 | 2002 Jaguar X-Type

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...