Re: I forgot the keyless entry code lincoln continental...
Hello! You have to get your documents together, write down the VIN # and go to the dealer. They can help but it might take a day or two for Detroit to answer.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
https://www.youtube.com > watch
1:21
How to program your 1995, 1996, and 1997 Lincoln Town Car remote keyless entry fob alarm by yourself at ...
YouTube · NO4DS4ME · Jun 9, 2016
The MASTER CODE for your keypad entry (I believe that is what you are talking about) can be found on a sticker on the hinge of your trunk, passenger side. It will be five digits.
It sure sounds like a fuse. You can check for proper voltage at the hot wire of the actuator while you try to pop it. I think you are overlooking the fuse. Make sure the actuator has a good ground as well.
After entering the 5 digit code that is currently installed, press the 1/2 button and enter your new 5 digit code. After entering your new code, press the last 2 buttons (7/8 + 9/0) at the same time. This will confirm your new code has been accepted. Keep in mind, in case of loss of power, the keyless entry will revert back to the original code. Best of luck.
Greg
Enter the keyless entry code on the door keypad 3 times. Locks will cycle down and up after the third time. Press and release the "lock" button. Locks should cycle again. May need to hold down lock button for 2 sec rather than press and release. Program up to 4 remotes. If cycling the key on-then-off works, you'll probably have to do it quickly 8 times and after the 8th time, locks will cycle down then up and press and release the lock button.
×