Question about 2007 Dodge Ram 1500 Quad Cab Sport
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Maybe!!!! Wire taps are not a good thing. But yes I do them also... Kinda a catch 22! But the bad thing about wire taps are that they carode the exposed wires. Recheck the conections where you made the connection. If it breaks contact then the locks might not work. Or if the conection at that point is grounding out and blowing your relay or fuse. But if your tailgate lock still operated when all others did not then chances are that one of the door switches is bad. after you recheck your wires, disconnect the battery for about 10 to 15 minutes. If it is the relay then that should let it cool off and reset itself long enough to work or atleast hear a click out of the locks when you power up again. LISTEN CLOSELY FOR THE CLICK. Have someone inside of the car and up by the front of the car and this will increase the chance to hear it. You do not need the key on for the test because the locks have power all of the time. Good luck and let me know.
Posted on Jan 03, 2009
could be the battery, sometimes all the electrical would stay on but the battery doesnt have enough juice to crank the car over, if not check the alternater.
Posted on Apr 26, 2009
When the armed Vehicle Theft Security System (VTSS) senses that the battery has been disconnected and reconnected, it enters its power-up mode. In the power-up mode the alarm system remains armed following a battery failure or disconnect. If the VTSS was armed prior to a battery disconnect or failure, the system will have to be actively or passively disarmed after the battery is reconnected.
The alarm can be disarmed by locking the vehicle and turning the drivers door lock to the lock (arm) position. Wait a few minutes then unlock (disarm) the drivers door and the vehicle should start.
If the VTSS has been disabled in the high-line Central Timer Module (CTM), the VTSS feature must be re-enabled using the Chrysler DRB scan tool. The clicking you heard was probably from the CTM located behind the glove box.
Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.
Posted on Apr 28, 2009
Tips for a great answer:
Jul 19, 2018 | Dodge Cars & Trucks
May 23, 2016 | Dodge Ram 1500 Cars & Trucks
Apr 09, 2016 | Dodge Cars & Trucks
Oct 17, 2012 | 2000 Dodge Ram 1500 Truck
Aug 30, 2012 | 2006 Dodge Ram 1500
Aug 30, 2012 | Cars & Trucks
Jul 29, 2010 | 2007 Dodge Ram 1500 Quad Cab Sport
Mar 02, 2010 | 2006 Dodge Ram 1500
Dec 19, 2009 | 1997 Dodge Ram 1500 Club Cab
Aug 12, 2014 | 2007 Dodge Ram 1500 Quad Cab Sport
63 people viewed this question
Usually answered in minutes!