Question about 2004 Land Rover FreeLander

4 Answers

W reg landrover, freelander

I have no fuse box diagram and my back main and brake lights are out, all bulbs checked

Posted by on

  • 7 more comments 
  • lightskin198 Dec 05, 2008

    my main tail lights an half of my dash board is'nt working, i check all of my fuse an they are all fine. need help!

  • clos2big1 Dec 07, 2008

    my main brake lights are out when i press on them they work but running lights are out and so are my dash radio lights. i think its a fuse just dont know which.

  • LandMarc Dec 19, 2008

    My fuse box is located to the lower left of my wheel. The (front) head lights went out and my blinkers in the front are not working either. No wiring diagram....

  • Anonymous Dec 24, 2008

    middle brake light works main ones do not

  • Anonymous Dec 29, 2008

    my rear beake lights are inop but my third brake light works also all other functions are fine

  • Anonymous Jan 17, 2009

    my stop lights(brake lights) are not working, put in new bulbs and still not working

  • gardypais77 Jan 30, 2009

    my right brake light dosen't work,I changed the bulb but nothing happend, some idea??thanks!

  • davcorradini Mar 26, 2009

    all three brake lights are out on my 2001 Durango. I replaced the switch, twice to be certin and still no brake lights. Is there anything else I can do???

  • meyc56 May 11, 2010

    2005 Toyota Sienna main rear brake lights are out but center rear works fine as well as all other lights. Checked fuses and bulbs and they are fine. Is it the brake pedal switch? Some other post said it could be the turn signal/headlight switch assembly.

×

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 89 Answers

This fuse is no.2 in the fuse box above the pedals and it should be a 15 amp.If you plugged a trailer in then check those electrics or check your brake light switch on the brake pedal.

Posted on Nov 30, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My brake lights and reverse lights have both gone out on my freelander ,dont know which fuse these are

Posted on Aug 20, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Where is the fuse box to check the fuses on a 1989 GMC Safari van

Posted on Dec 15, 2008

1. Check the bulbs to see if they are out. If out, replace.
2. check the bulbs for any water damage. If bulbs go out often, this might be the problem (the water, that is). You can always use Bulb Grease to help keep the socket and such clean and protected.
3. If the bulbs are good and the connection is good, then check the fuses. I couldn't figure out which one was for the brakes, but check them all. A burnt out fuse is pretty clear, usually. The metal part is broken/burned. You can also use a fuse indicator to see if the fuse is good.
4. If the fuses are good or you replaced the fuses and you still have the problem...there is a switch at the brake peddle under the dashboard. I know this is true for Golf 2000 with manual transmission. I don't know about automatics. Unscrew the dashboard (it took three 3 screws and an odd screw driver). Crawl under and you will see something mounted above the petal that either has 2 or 4 wires attached to it. That's the switch. Give the switch a good 90degree turn to the LEFT and it should be good to go.

Note: If you take the switch out of the mounting, the brake lights should be ON. If the lights do not turn on, then it might be the electrical system and only my mechanic can help you with that. He's the one who pointed me to the switch. So if you are in LA and need a good Volkswagen mechanic, let me know.

I hope this helps.

Posted on Jan 17, 2009

3 Suggested Answers

  • 1 Answer

SOURCE: 2004 Landrover Freelander stop/reverse light fuse keeps blowing

I had a persistent problem of hill light warning and TCS warning lights coming on for no apparent reason. There is a wire connection between the stop light switch and the control unit to let the system know when brakes are being applied. Changing the stop light switch cured it. The replaced switch was certainly sticking and the new one was of a different design. Replaced it myself as switch comes with a wiring loom. Need to get on your back under the steering wheel! Not very expensive. My car 2001 TD4

Les

Posted on Jun 30, 2009

  • 1 Answer

SOURCE: The main brake lights don't work on my 2002

That is NORMAL -- just found out myself. ONLY- the center light and the lower (bumper) lights are your brake lights. The main lights are ONLY used for running lights.... Got to luv it!

Posted on May 12, 2010

fullpiggie
  • 2 Answers

SOURCE: 2001 Landrover Freelander brake lights dont work - which fuse #

hey you can get a refund of what you paid to get the brake light switch replace from lad rover just found out that that switch is a recall and they do free repair or pay you for getting it replaced call ur dealer

Posted on Apr 03, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2002 Land Rover Freelander that is stuck in Park. The stop light switch has been replaced with an autozone part, but it still does not work. The break lights are also not working.


This might help you. Otherwise, just find a mechanic you trust and have him or her check the brake light bulbs. It could also be fuse problems. Check the diagram for your lights or check your manual. http://forums.edmunds.com/discussion/5166/land-rover/freelander/freelander-transmission-problems

For your fuse box diagram:
http://carwiringdiagram.net/2002-land-rover-freelander-fuse-box-diagram/

May 31, 2015 | 2002 Land Rover Freelander

2 Answers

2004 Freelander brake lights stay on?


BRAKE LIGHT MEANS BRAKE FAILURE.NOT SAFE TO DRIVE.CHECK BRAKE FLUID.COULD BE TOO LOW.GET VECHICLE FIX QUICK BECAUSE WHEN BRAKE LIGHT COMES ON.YOU DONT HAVE TO LONG BEFORE LOSING BRAKES GET TO A SHOP.I WOULD NOT KEEP DRIVING VECHICLE.

Jan 22, 2011 | 2004 Land Rover FreeLander

1 Answer

The main brake lights don't work on my 2002 Freelander. The center brake light does work as well as the tail lights when the lights are on. The bulbs are good and and the fuses are good. What should I...


That is NORMAL -- just found out myself. ONLY- the center light and the lower (bumper) lights are your brake lights. The main lights are ONLY used for running lights.... Got to luv it!

Feb 20, 2010 | 2002 Land Rover Freelander

3 Answers

54 reg freelander brake lights not working centre light works chaned bulbs and checked fuse


quite a few people have this problem ,it would appear that the problem lies in the connection plug where the lights wiring connects to the chassis loom.normally a quick clean and grease of the connections works wonders

Oct 25, 2009 | 2002 Land Rover Freelander

2 Answers

Low Fuel Pressure on Landrover Freelander TD4


From 53 reg onwards, diesel pump is under R.H. rear wheel arch, hidden by the plastic wheel arch liner. Older versions have combined fuel pump/sender in the tank (under R.H part of rear seat).
You should be able to hear a faint purr from the pump when ignition is turned on but engine not yet running.

Oct 07, 2009 | 2003 Land Rover Freelander

2 Answers

2004 Landrover Freelander stop/reverse light fuse keeps blowing


I had a persistent problem of hill light warning and TCS warning lights coming on for no apparent reason. There is a wire connection between the stop light switch and the control unit to let the system know when brakes are being applied. Changing the stop light switch cured it. The replaced switch was certainly sticking and the new one was of a different design. Replaced it myself as switch comes with a wiring loom. Need to get on your back under the steering wheel! Not very expensive. My car 2001 TD4

Les

Jun 19, 2009 | 2004 Land Rover FreeLander

2 Answers

Brake lights dont work


it could be a bad earth lead find the earth strap take it off and just skrach the surface and put the strap back on.

Jan 21, 2009 | 2002 Land Rover Freelander

1 Answer

How do i open the back door of the 2004 landrover freelander from


There is no way but to short the wires at the tail door switch outside which should only be done if you have a circuit diagram and experience on the vehicles electrical systems or you could damage components beyond repair.Make sure the fuse is not blown.

Nov 29, 2008 | 2004 Land Rover Range Rover

3 Answers

2001 Landrover Freelander brake lights dont work - which fuse #


hey you can get a refund of what you paid to get the brake light switch replace from lad rover just found out that that switch is a recall and they do free repair or pay you for getting it replaced call ur dealer

Nov 12, 2008 | 2004 Land Rover FreeLander

7 Answers

2002 landrover freelander brake lights


The brake light Swich on the brake pedal ( top 1 the other is cruise control ) may be faulty , also make sure you are testing the lamps on the bumper the top ones are only fog lights ( Spent hours on wrong bloddy ones - wifes car)

Jul 15, 2008 | 2002 Land Rover Freelander

Not finding what you are looking for?
2004 Land Rover FreeLander Logo

3,911 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...