Question about 1996 Hyundai Accent

1 Answer

Window winder mechanism - manual

My window mechanism is broken. which other car would have the same mechanism, so that i can swop it with them, or must it only be an accent mechanism i can use.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 163 Answers

Better use accent replacement not to have any problem soon in the future.
window winder mechanism - manual - 95e0ac5.gif
1. After applying the power to the motor, check the smooth operation while changing the polarity in turn. 2. If the operation is not specified, replace the motor.
POWER WINDOW SWITCH INSPECTION 1. Remove the switch from the door grip handle. 2. Check for continuity between the terminals.

Posted on Sep 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Manualy operated window on front door wont roll up or down


Kindly check the winder handle if OK. If fine you need to check the winder unit by removing the door panel. Possibly the teeth of the unit is worn out and also check the return spring.

Nov 12, 2016 | Cars & Trucks

1 Answer

1995 Saab window sto working


just the one ?

faulty master or window switch

if you can hear the motor whirring faulty winder mechanism


broken wire
at worst
door car off and test motor is getting 12 volts

26334511-wzmdnmacbahgfj1qbvtn5rtd-1-0.jpg

26334511-wzmdnmacbahgfj1qbvtn5rtd-1-1.jpg

26334511-wzmdnmacbahgfj1qbvtn5rtd-1-3.jpg

Oct 31, 2016 | Saab Cars & Trucks

2 Answers

Window does not stop at the bottom or the top ,it sounds like it is skipping.


check the window slides are clean and let the glass move freely

if electric windows possible stripped /broken motor drive cogs
if manual windows faulty winder mechanism

Jun 22, 2016 | Cars & Trucks

1 Answer

How do i fix the broken cables in my drivers side window in my 2001 dodge durango


The cable cannot be fixed, it will have to be replaced, and possibly the whole winder mechanism. You have to remove the inside door panel to access the winder parts, find out what is broken and get the parts from a dealer or breakers yard.

Feb 05, 2011 | 2001 Dodge Durango

1 Answer

Rear passenger window won't roll up after I rolled it down I can hear the motor but nothing happens. I can't even pull the window back up with my hands.


These models are prone to corrosion of the winder cable mechanism due to water ingress from the window rubber seals being poor so, the money is on a broken winder cable. Hope this helps

Apr 05, 2010 | 2001 Hyundai Sonata

1 Answer

How do I remove the window winder mechanism on the drivers side door? The window is stuck partly open and I can't seem to move it. Peter


The fault is with the regulator on the window. Remove winder and door handles. Remove door lining and reconnect window to winder rail. Reverse for reassembly

Mar 17, 2010 | 1999 Daewoo Nubira

1 Answer

My manual drivers side window keeps falling off


It will be aworn mechanism in the winder assembly OR not adjusted correctly.

Feb 25, 2010 | 1998 Honda Civic

1 Answer

Cannot remove window winder


There is a clip behind the window crank (winder). There is a special tool to slide behind the winder that pushes the clip out, the tool is not expensive and can be purchased at most parts stores. It is possible to remove the clip without the tool, but a little tricky (no brute strength!!!). The clip is thin (about the thickness of a heavy paper clip) and 'u' shaped. It slides onto the center backside of the winder. Gently push in the door panel while you gently pry out the winder. You may be able to grab the clip with some very narrow needle nose pliers, or use one or 2 flat thin screwdrivers to slide the clip off. Let me know how its goes.

May 01, 2009 | 1996 Ford Explorer

2 Answers

How do I remove the manual window winder handle ?


I have to do the same with my door handle on my excel. The Window winder is held on by a sort of circlip thingy and they do make a special tool to remove it, and i would reccommend buying it or even borrowing one from a local mechanic. it is possible to remove it with a screwdriver and some wire but it is very hard and fiddly as you have to do it blind.

Jan 18, 2009 | 1994 Hyundai Excel

1 Answer

I have a renault laguna 2002 and i was putting my window down and it stop half way and will not move what should i do?


the winder mechanism is broken. common problem. the winder needs to be replaced in a renault dealer

Jul 22, 2008 | 2000 Renault 181

Not finding what you are looking for?
1996 Hyundai Accent Logo

872 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...