Question about 2004 Chevrolet TrailBlazer

1 Answer

2003 trailblazer lt 4wheel drive

How to replace front hub bearings

Posted by on

  • auctionjon Feb 26, 2009

    after replacing the driverside outer tie rod end due to excessive wear the trailblazer still makes a growling noise comming from the driverside and there is a little vibration in the steering wheel and gas pedal could the noise be a wheel bearing assy or maybe the tires?

  • Anonymous Mar 29, 2014

    wrench and tires symbol loud noise while driving and seems like your in 4wheel when in two

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

  1. Remove the tire and wheel center cap.
  2. Remove the drive axle nut.
  3. Raise and support the vehicle. Remove the tire and wheel. .
  4. Remove the brake rotor.
  5. Disengage the wheel drive shaft from the wheel hub and bearing. Place a brass drift against the outer end of the wheel drive shaft in order to protect the wheel drive shaft threads. Sharply strike the brass drift with the hammer. Do not attempt to remove the wheel drive shaft from the wheel hub and bearing at this time.
  6. Remove the wheel hub and bearing from the steering knuckle by removing the three bolts coming in from the back side of the knuckle.
Of course you may have to use a hammer to loosen the bearing from the knuckle.

Good Luck

Posted on Sep 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Any ideas why a 2003 chevy trailblazer may vibrate in the front but stops when you turn left


Does the vehicle make any noises while driving? If there is a "growling or roaring " noise associated with the vibration, check the right front hub bearing. If there are no noises and only vibration, check the right front upper ball joint and control arm bushings. The Trailblazer's upper ball joint and control arm bushings become worn and cause the tire and wheel assembly to shimmy while driving. The vibration stops when turning left because of weight transfer to the right side which keeps the wheel steady for a moment. Also, check the tire for irregular wear.

Mar 05, 2015 | 2003 Chevrolet TrailBlazer

1 Answer

How to replace wheel studs on 2003 trailblazer


if its the front, the hub bearing needs pulled

Dec 30, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

Where are the speed sensors on a 2004 chevy trailblazer?


Assuming that you're talking about the front wheel speed sensors...
Your best bet is to replace both from wheel hub/bearing assemblies.

They'll cost about $100-$150 each.
When the wheel speed sensors are setting ABS codes it usually means that the bearings are bad.
When you replace the whole hub assembly, a new sensor is already installed in that hub. If it just the sensor (unlikely that just the front sensors alone are going bad) the sensor itself is usually 3/4 of the price of a new hub anyway.

Apr 24, 2012 | 2004 Chevrolet TrailBlazer

1 Answer

2wd front wheel need to replace bearings or hub assembly which is best


A Front Wheel Drive Vehicle Can Have Two Types Of Rear Wheel Bearings: Serviceable Bearings, Or Nonserviceable, Sealed Bearings. When Sealed Bearings Fail, The Bolts Holding The Bearing And Hub To The Axel Or Control Arm Must Be Removed. When Installing The New Bearing Assembly, Torque The Bolts To Specifications.Some Manufacturers require The Use Of New Fasteners When Rear Bearings And Hubs Are Replaced.

When A Serviceable Wheel Bearing Is Used, The Bearing Can Be Disassembled And Packed With Grease.It Is Serviced Like A Front Wheel Bearing On A Rear-wheel-Drive-Car.

Apr 09, 2010 | 2003 Ford Explorer Sport Trac

1 Answer

2006 chevy trailblazer replace 4wheel drive selector


i've got a 2003, and i believe the parts and procedures are the same for the years. there are screws in the dash trim by the ciggarette lighter, and more on the underneath of the dash pad where the gauge cluster is. then carefully pop the dash trim out. there are retaining clips that hold it in besides the screws. they should pop out without too much effort. i'd start near the radio and be careful. there also may be two more screws near the bottom of the steering wheel that you'll have to remove the trim below it to get at.

Feb 06, 2010 | 2006 Chevrolet Trailblazer

1 Answer

Auto locks for front 4x4 2007 f150 cant stop grinding noise


Are you under warranty? Make it the dealers problem if its eligible.

If the front hubs are grinding regardless of being in 2wheel or 4wheel drive it can be the hub bearings which turn regardless. If it grinds only when in 4x4 then the wheel shafts or differential or front driveshaft or transfer case is making the noise because all of these parts move when in 4wheel drive.

Nov 09, 2009 | Ford F-150 Cars & Trucks

1 Answer

Squeaky sound front left tire and 4Wheel Drive will not turn on


the squeak could be brakes or wheel hub/bearing. most likely it is the bearing and hub assembly, i would not drive it , take it to you local service station and have then replace or repair the hub assy.

Nov 22, 2008 | GMC Jimmy Cars & Trucks

Not finding what you are looking for?
2004 Chevrolet TrailBlazer Logo

1,107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...