Question about 1999 Chrysler 300M

1 Answer

Wont start 1999 chrysler 300m, have head lights and interior lights but radio wont come on and no lights on the instrument panel and wont even turn over when you try to start please help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 98 Answers

Check for 12 volts at starter from battery, and make sure power and grounds are on well, remove starter and take to auto zone to test for free, then buy a chiltons if that doesnt work and trouble shoot it from the no start category, could be other sensors.

Posted on Sep 05, 2008

  • erik mcdonald
    erik mcdonald Sep 10, 2008

    if you unlock it does it honk 3 times? that means the vtss has been activated, any idea if that is happening? or any security lights on the panel? there is no click when key is turned over either? try to be as descriptive as possible and we'll get it figured out, let me know

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 300m no start


If you are not using the original/factory key it won't start. There is a chip in the original. Hope it helps

Sep 29, 2012 | 1999 Chrysler 300M

1 Answer

Where is the lighting control module located on a chrysler 300m?


It's in what Chrysler calls the "junction block". What normal people call the fuse box. The fuse box is located at the driver's end of the instrument panel. You need to open the driver's door to see and remove the cover plate that hides it.
Charlie

Aug 21, 2011 | 1999 Chrysler 300M

1 Answer

I have a 1999 300m the interior lights remain on,


The sensor switch in the door latch is dirty or may have been damaged. Thoroughly spray the door switches with a cleaning spray like carb cleaner. Then give it some canned air to blow out any remaining dirt. Then use a spray lubricant like WD40. After that open and close the door a few times and see if the light goes off when you close the door. If this doesnt work you'll need to take off the door panels to get a better view.

Jan 02, 2010 | 1999 Chrysler 300M

1 Answer

Interior light in 1999 chrysler 300m


take the reali small screvdriwer,and gentli pop it out, sory for bad english

Sep 22, 2009 | 1999 Chrysler 300M

1 Answer

Fuse keeps blowing in 99 chrysler 300m


You have a short in the wiring somewhere. have you tried to pull the connectors off the tail light assemblies? pull both then connect them 1 at a time to see which side is causing the problem, could be as simple as a bulb that has shorted it self out.

Jun 26, 2009 | 1999 Chrysler 300M

2 Answers

Elec


fuse 19 in the interior fuse box feeds those circuits...fuse I in the fuse box under the hood feeds fuse 19...i know you checked the fuses but did you check them for power

Jan 06, 2009 | 1999 Chrysler 300M

1 Answer

My 2001 300m wont start


Hi Yes for sure battery not got enough power or is poor connection at the battery but sounds like battery of the two.

Dec 11, 2008 | 2001 Chrysler 300M

Not finding what you are looking for?
1999 Chrysler 300M Logo

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...