Question about 1992 Honda Accord

1 Answer

Wiper washer switch

No power to winshield washer motor.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 61,037 Answers

If the fuse is OK, and there is 12 volts at the motor replace the wiper control switch.

Posted on Sep 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Help with wiper motor


Check for voltage at motor connection. If voltage motor probably bad.

May 04, 2016 | Cars & Trucks

1 Answer

My winshield wiper relay is not working the pump for the washer spray and the wipers work for that action but i cant turn on the wipers any other way, what fuse is it that might be the fix for this and i...


It's the switch. Usually the when the wiper switch starts going bad the windshield washer spray doesn't work. The switch should be about $80 at the dealer.

Mar 10, 2011 | Mercury Mountaineer Cars & Trucks

3 Answers

When using the windsheild washer the water come out but the wipers do not turn on


if ur winshield washer fluid is low wipers wont run, check fluid if full then other issues

Nov 18, 2010 | 2002 Lincoln LS

3 Answers

Winshield washer fluid will not come out and you can not hear the motor the fuses are fine do I need a new motor for the winshield washer fluid. any advice would be very much appreciated.


WIPER FLUID LEVEL COULD BE LOW. ADD SOME MORE WIPER FLUID.IF FLUID LEVEL OKAY CHECK WIPER SPRAY NOZZLES COULD BE CLOGGED CLEAN THEM WITH A SMALL PIECE OF WIRE SMALL AS TINY PAPER CLIP WHICH CAN BE USED..

Oct 20, 2010 | Pontiac G6 Cars & Trucks

1 Answer

2005 Suzuki Forenza Wiper Washer Inop.


first and foremost, check that all your fuses are good. If they are, your next step would be to pull the winshield washer motor out and test it by applying 12 volts from the battery directly to the motor to see if it turns on. if it works then your problem is in the wiring, check that you are getting power to the harness when you turn it on. Now, if the motor does not work while applying battery power, then you need a new washer motor.

Jul 30, 2010 | 2005 Suzuki Forenza

1 Answer

Winshield wiper just went out on 99 plymoth


CHECK WIPER FUSE.IF FUSE GOOD POWER GOING TO WIPER MOTOR IF YES.WIPER MOTOR IS BAD. IF NO BAD SWITCH OR BROKE DISCONNECT WIRE.

Feb 24, 2010 | 1999 Plymouth Voyager

1 Answer

The winshield wiper on my 2007 Jetta its no


You likely don't need a new motor. You just have to get your wipers repacked with grease.

Dec 27, 2009 | 2000 Volkswagen Jetta TDI

1 Answer

Front wipers don't work


Winshield wipers inoperative in all switch positions:

Does your windshield washer work? Check circuit breaker in fuse panel. If it is good then you may have either a bad wiper motor or switch. If you have a volt meter check the white wire (going off 93 wiring color code) on wiper motor connector with switch in low to see if you have 12 volts. If you have 12 volts then you may have a bad wiper motor. If you don't then you may have a bad switch. Hope this helps.

Jun 21, 2009 | 1996 Ford Explorer

3 Answers

Windshield wiper switch


the most common problem is called the multi-function switch or turn signal switch--replace it----8 out of 10 thats the problem

Jun 27, 2008 | 1991 Ford Explorer

Not finding what you are looking for?
1992 Honda Accord Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...