Question about 2001 Volvo V70

2 Answers

DSTC light on dashboard display

Hello, have a problem when pressing accelerator engine dip's for a split second before accelerating, and the Dtsc is displayed in comp messages are they connected ?.

Thanks for your help and or possible advice.

Regards.
H

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a v70 D5 the dash board display has failed to work no speedo no rev nothing will light up every thing working just no dash

Posted on Sep 07, 2011

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Volvo Master
  • 69,199 Answers

Yes they are, you need to run the trouble code test and find out what is stored in memory.

Posted on Sep 08, 2008

  • yadayada
    yadayada Sep 09, 2008

    Why did you rate this Thanks For Trying? I gave you good information, the same advice info the dealer would give, Please change the rating to Helpful. Thanks

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ford ka 2013 had oil and filter changed at a garage. they couldn't reset change reset service message. any help please!


call any ford dealer and ask them usually it is with the KEY and the mileage reset button .hold that button in and cycle key . but do not start the vehicle .

Jun 18, 2016 | Ford Cars & Trucks

Tip

Chevrolet service light 1991-01


Camaro

1998-01

To reset the "OIL CHANGE" light, press and hold the "TRIP/OIL RESET" button on the instrument panel for 12 seconds. When the light flashes and then goes out, the system is reset.


Corvette


1997-01

To reset the monitor after an oil change, turn the ignition on. Press the "TRIP" button so that the "OIL LIFE" percentage is displayed. Press "RESET" and hold it for two seconds. The word "RESET" should appear on the monitor, then "OIL LIFE 90%".


Impala,
Monte Carlo


2000-01

Turn the ignition to ON without starting the engine. Fully press and release the accelerator three times within five seconds. If the CHG OIL SOON lights two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHG OIL SOON light comes back on, the system has not been reset, repeat the procedure. Follow this procedure to reset the GM Oil Life System using the DE 100 Series Radio. Turn the ignition to ACC or ON and the radio off. Press and hold the DISP button on the radio for at least five seconds until SETTINGS is displayed. Press the SEEK up or down arrow to scroll through the main menu. Scroll until OIL LIFE appears on the display. Press the PREV or NEXT button to enter the submenu. RESET will be displayed. Press the DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second. Once the message has been reset, scroll until EXIT appears on the display. Press the DISP button to exit programming. A chime will be heard to exit programming. A chime will be heard to verify the exit.


Impala,
Caprice


1994

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Access the reset button on the end of the instrument panel by the fuse block. Press the switch and hold it for at least 5 seconds.



Lumina,
Monte Carlo,
Impala,
Caprice


1996-00,
1996-99,
1995-96,
1995-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds. The light will flash and go out.


Corvette


1990-96

After an oil change, or when "CHANGE OIL" appears on the Trip Monitor, with the ignition on and engine off, press the "ENG MET" button (located on trip monitor) once. Press the "ENG MET" button again within 5 seconds. Within 5 seconds, press and hold the "RANGE" button (1990-1994) or "GAUGES" button (1995). The light will flash. When it stops flashing and goes out, the system is reset.


Chevrolet Suburban,
GMC Yukon XL,
Chevrolet Silverado,
GMC Trucks Sierra


2000-01,
1999-00

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.


Silverado, Sierra Trucks


1991-93

To reset the "CHANGE ENGINE OIL" message, turn the ignition key to the run position. Press and release the accelerator pedal three times within 5 seconds. If the light flashes for 5 seconds, the system is reset. Repeat procedure as needed.















on Dec 07, 2009 | Chevrolet Camaro Cars & Trucks

1 Answer

How to turn of change engine oil light on 2011 ford focus


From FocusFanatics online - -

Resetting the oil life monitoring system
1. Turn the ignition key to the on position. Do not start the engine.
For vehicles with push-button start, press and hold the START/STOP
button for two seconds without pressing the brake pedal. Do not attempt
to start the engine.
2. Press both the accelerator and brake pedals at the same time.
3. Keep both pedals fully pressed.
4. After three seconds, the Service: Oil reset in prog. message will be
displayed.
5. After 25 seconds, the Service: Oil reset complete message will be
displayed.
6. Release both the accelerator and brake pedals.
7. The Service: Oil reset complete message will no longer be
displayed.
8. Rotate the key to the off position.
For vehicles with push-button start, press the START/STOP button to
turn the vehicle off completely.

Jul 07, 2012 | Ford Cars & Trucks

1 Answer

Where is the fuel reset button for a 2004 Chevrolet Silverado 2500 HD 6.0 L fuel injection?


For vehicle with steering wheel conrtols ,to reset the fuel,Press and hold the select button for five seconds while the fuel filter life message is displayed . The message will appear on the DIC for ten second
For vehicle without steering wheel control ,do the following, without pressing the pedals,turn the ignition key to the on position without starting the engine ,wait five seconds,completely press the the brake and the accelerator pedal simutaneously, and hold for ten seconds ,the system is now reset ,
The next time the engine is started the message will no longer be displayed, Always reset after a fuel filter change

Mar 03, 2012 | 2004 Chevrolet Silverado 2500HD

1 Answer

Where do I put the transmission fluid? The car does not accelerate at all when pressing on the gas pedal. Help, please!


Hello: If this is a rear wheel drive, you will find a dip stick under the hood towards the passenger side rear of the engine compartment remove the dip stick (should have a red handle) with a proper size funnel add transmission fluid through the tube for the dipstick. If it is a front wheel drive the procedure is the same except on the front wheel drive the dipstick is on the driver side toward the rear of the engine compartment. Check the fluid with the engine running. Do not overfill. Does the engine speed up when you press the accelerator? If so if the car moves after you put fluid in the transmission the you need to find out where the leak is and repair it. Use dextron3 transmission fluid

Nov 16, 2010 | 1989 Cadillac Brougham

1 Answer

Resetting oil life sensor


USING THE RADIO:

Follow this procedure to reset the GM Oil Life System.

Turn the ignition to ACC OR ON, with the radio off.
Press and hold the TUNE DISP button on the radio for at least five seconds until SETTINGS is displayed.
Press the SEEK PTYPE or the SEEK PSCAN up or down arrow to scroll through the main menu.
Scroll until OIL LIFE appears on the display.
Press the 1 PREV or 2 NEXT button to enter the submenu. RESET will be displayed.
Press the TUNE DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second.
Once the message has been reset, scroll until EXIT appears on the display.
Press the TUNE DISP button to exit programming. A chime will be heard to verify the exit.

USING THE ACCELERATOR PEDAL:

Follow this procedure to reset the GM Oil Life System.

Turn the ignition to ON, with the engine off.
Fully press and release the accelerator pedal three times within five seconds.
If the CHANGE ENGINE OIL message flashes, the system is reset. However, if it stays on , it did not reset. Repeat the procedure.
Source(s):GM Service Manual

Jul 03, 2010 | 2006 Chevrolet Impala

2 Answers

Reset oil change message.


YOU TURN IGNITION TO RUN POSITION..ENGINE OFF..PRESS ACCELERATOR 3 TIMES WITHIN 10-15 SECONDS..RELEASE AND TURN KEY OFF..THEN START VEHICLE,IT SHOULD BE RESET

Jul 11, 2009 | 2008 Chrysler Sebring

1 Answer

Reset message center window


THIS SHOULD HELP YOU

Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three times within five seconds. If the CHG OIL SOON light flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHG OIL SOON light comes back on, the system has not reset, repeat the procedure. Follow this procedure to reset the GM Oil Life System using the DE 100 Series Radio®. Turn the ignition to ACC or ON and the radio off. Press and hold the DISP button on the radio for at least five seconds until SETTINGS is displayed. Press the SEEK up or down arrow to scroll through the main menu. Scroll until OIL LIFE appears on the display. Press the PREV or NEXT button to enter the submenu. RESET will be displayed. Press the DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second. Once the message has been reset, scroll until EXIT appears on the display. Press the DISP button to exit programming. A chime will be heard to verify the exit.

Jul 02, 2009 | 2004 Chevrolet Impala

Not finding what you are looking for?
2001 Volvo V70 Logo

Related Topics:

693 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

69199 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...