Question about 1995 Nissan Maxima

1 Answer

Question do you know where i can get a Belt Tension Adjuster? i changed the belts but the adjuster in not putting pressure down on the belts....I need to buy a repaclement.... jrodri_la_17@yahoo.com

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

I've always had great luck ordering from Courtesy Nissan in Texas (www.courtesyparts.com) - they have parts for all Nissans and seemed to be staffed with enthusiasts. 9 years and counting and no screwups for me yet:)

Posted on Sep 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace fan belt on a Mitsubishi pajero


Instructions
  1. 1 Open the bonnet of the Pajero, and turn the bolt on the centre of the tension pulley with a socket wrench two full rotations. The tension pulley is the pulley directly behind the fan in the upper portion of the front of the engine.
  2. 2 Loosen the adjuster bolt on the tension pulley bracket. This bolt is on the left-hand side, situated in a long horizontal groove.
  3. 3 Slip the fan belt off of the engine. Draw a diagram of the path of the fan belt if the factory printed sticker diagram is no longer in the front of your engine on your Pajero.
  4. 4 Insert the new fan belt, winding it through the various pulleys according to your diagram. Put it on the tensioner pulley last.
  5. 5 Place the tension belt tool on the tension pulley bolt and pull until the slack in the belt is gone. When there is no slack, keep the pressure on the pulley, and tighten the adjuster bolt with the wrench. Tighten the lock bolt on the pulley.

Jun 17, 2015 | 2006 Mitsubishi Pajero 3.2

1 Answer

How to tide belt


okay loosen alternator pivot bolt that is the bottom bolt below the alternator pulley,loosen also top pivot bolt to alternator.then you have long adjuster bolt top upper side alternator you need to loosen adjuster bolt lock nut then tighten the adjuster bolt to get alternator belt tight.new belt tension should be 170 - 180 ft lbs, used drive belt tension is 95 - 135 ft lbs, torque adjusting lockbolt 13 ft lbs, pivot bolts to 41 ft lbs.

Sep 01, 2012 | 2002 Lexus RX 300

1 Answer

Show me how to change ac pelt


loosen the belt tension adjuster jam nut on side and loosen the lockscrew to loosen release tension to the AC COMPRESSOR belt.your vechicle has two tension adjusters one for power steering and tension adjuster for AC COMPRESSOR AND ALTERNATOR.

Sep 01, 2012 | 2002 Kia Sedona

1 Answer

How do i release tension on the belt


I would replace the steering pump belt at the same time you do the alternator belt (buy both).
To take off the alternator belt .
First , take off the negative battery cable so you do not blow an expensive fuse on the positive battery cable clamp(or a block fuse under the hood). Facing the back of the car , reach UNDER the alternator and loosen the bolt on the bottom right side, now loosen the bolt on the adjuster block on top, you can now turn the adjuster bolt and move the alternator to change the belt.
To take off the steering pump belt on the front of the motor, you need to loosen the nut on the back side of the pulley it holds the adjuster pulley in place . With the adjuster pulley loose , you can use the adjuster bolt to move the pulley to adjust/take off the steering pump belt.

Jan 29, 2011 | 2003 Mitsubishi Galant

1 Answer

I want to change two belts (A/C and Alternator) on my 1999 Mitsubishi Mirage 1.5 car. What steps I am suppose to do.


First, feel the tightness of your belts. You will have to tighten the new belts to the proper tightness. If they are too tight, they will wear the bearings prematurely. If they are too loose, they will slip.

Alternator Belt Removal

db56f56.gif


  1. Loosen the alternator lock nut.
  2. Loosen the adjuster bolt.
  3. Rotate the adjuster bolt counter clockwise to release the tension on the belt.
  4. Remove the belt.
Similarly for the compressor belt

98b2b36.gif
  1. Loosen the lock nut.
  2. Loosen the adjuster bolt.
  3. Rotate the adjuster bolt counter clockwise to release the tension on the belt.
  4. Remove the belt.
5. Install the new compressor belt

6. Rotate the adjuster bolt clockwise until the belt is tight like it was before you removed it.

7. Tighten the lock bolt.

8. Install the new alternator belt

9. Rotate the adjuster bolt clockwise until the belt is tight like it was before you removed it.

10. Tighten the lock bolt.

11. enjoy life

Oct 12, 2010 | 1999 Mitsubishi Mirage

1 Answer

97 nissan maxima replace power steering belt


Easy to do, but also easy to do wrong.

1. Find the belt.
2. Find the belt tensioner.
3. Find the belt tensioner adjuster screw.
4. Loosen the adjustment screw, and slack the belt.
5. Remove the belt.
6. Replace the belt.
7. Tension the belt using the adjustment on the belt tension adjuster.
8. Drive around and steer, easily.

Enjoy.

-Jackson
http://urbanscooters.com/

Oct 11, 2010 | 1997 Nissan Maxima

1 Answer

How do i change belt on mitubishi mirage 98


( BEFORE ADJUSTING THE ALTERNATOR BELT DISCONNECT THE NEGATIVE BATTERY CABLE OR YOU MIGHT BLOW AN EXPENSIVE HIDDEN FUSE)to change the alternator belt, you have to loosen the lower mount bolt on the alternator, loosen block shaped bolt that the long adjuster bolt goes through, and loosen the belt by turning the long adjuster bolt, take off the belt. to adjust the power steering belt, there is a long adjuster bolt that moves a tensioner pulley, first you have to loosen the nut that holds the pulley in place , now the pulley can be moved with the adjuster bolt.

May 24, 2010 | 1998 Mitsubishi Mirage

2 Answers

Isuzu Trooper V6 2001 multi rib belt adjustment


First, if you're serious about car repair, get the shop manual (helminc.com). Not cheap, but cheaper than ruining your engine.

Second, unless you are confident in your mechanical abilities and / or are willing to use your vehicle as training, leave major work to the pros. A good mechanic is like gold, and just as hard to find.

Third, you don't really adjust the tension. There is a spring-loaded idler that puts just the right amount of tension on the belt. Using the proper tool, you lever the idler to take the tension out and slip the belt off the other pullies. Then take the new belt and rout it just like the old one, lever the idler again, then slowly release it back against the belt to take out the slack.

Piece of cake...

Mar 01, 2009 | 2001 Isuzu Trooper

Not finding what you are looking for?
1995 Nissan Maxima Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...