Question about 2007 Dodge Grand Caravan SXT Minivan

2 Answers

Passenger side power window doesn't work at all, from either switch. motor doesn't make any noise at all, which leads me to believe its an electrical problem. tested the passenger side switch and all seems ok.is it common for the drivers side switch (component board)to go out. without electrical drawings its hard to trace out.

Posted by on

  • cshellmusic Mar 15, 2009

    I have the same problem but the passenger window does not work at all.

  • Anonymous Mar 23, 2014

    the motor is good up and down the switch is sending power up and down but not giving ground to the motor from the master switch or passenger switch what could this be

×

2 Answers

Had this problem my self wit drivers window, just take the door cover to get to the motor you will unscrew two little scrawls take magnet of and clean inside also all contacts around and on side, scroll back and no problems :)

Posted on Sep 16, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 41 Answers

Check to see if the wire in door jam is stretched or broken. This may cause a break in power to window motor. Check the motor with power probe to see if motor is working.

Posted on Sep 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the power window relay located in a 2002 mercury villager?


Principles of Operation
The driver power window regulator motor is controlled directly by the master window/door lock/unlock switch (and its integrated "auto down" module). Power is supplied to the power window relay and the master window/door lock/unlock switch, and the passenger power window switch when the SEC/timer module grounds the coil side of the power window relay. The SEC/timer module will ground this relay when the ignition is in the ON position and will remain energized for approximately 15 minutes or until the driver or passenger door is opened.
The driver power window regulator motor is a reversible motor that is operated by applying power and ground to the motor leads to lower the window, and then reversing polarity on those leads to raise the window.
The passenger power window regulator motor is controlled directly by the passenger power window switch and can also be controlled by the master window/door lock/unlock switch. Power is supplied to the power window relay and the master window/door lock/unlock switch, and the passenger power window switch when the SEC/timer module grounds the coil side of the power window relay. The SEC/timer module will ground this relay when the ignition is in the ON position and will remain energized for approximately 15 minutes or until the driver or passenger door is opened.
The passenger power window regulator motor is a reversible motor, which is operated by applying power and ground to the motor leads to lower the window, and then reversing polarity on those leads to raise the window.
The power rear quarter glass is also directly controlled by the master window/door lock/unlock switch. The power rear quarter glass power latches also utilize reversible motors. The power rear quarter glass power latches are operated by applying power and ground to the motor leads to open the window, and then reversing polarity on those same leads to close the window.
Visual Inspection Chart Mechanical Electrical
  • Improperly aligned window
  • Damaged window mounting
  • Window frame interference
  • Central junction box (CJB) Fuses:
    • F30 (10A)
    • F32 (20A)
    • F34 (20A)
    • F59 (7.5A)
  • Battery junction box (BJB) Fuses:
    • F20 (30A)
    • F27 (45A)
  • Switches
  • Circuits
  • Connectors
  • Heated back light
  • Relays
Which window is not working ?
  • Single power window is inoperative
  • Front door power window switch.
  • Front door power window regulator.
  • Circuit.
  • Driver door power window switch.
  • GO to Pinpoint Test B .

Apr 07, 2015 | 2002 Mercury Villager

1 Answer

What could be problem


1) Master power window switch on the driver door may be bad.
2) Make sure the passenger door master switch has the passenger door switch enabled. If the switch on the passenger door wont raise the window, you probably have a bad window regulator. If it raises the window then the master switch is bad.
3) If the window makes noises when you use the switch and doesn;t raise, then the regulator is bad, Check EBAY for sales, that's where you or your mechanic can find them...Chris

Mar 30, 2014 | 1992 Mercury Capri

1 Answer

Follow me here: The driver side passenger window will go up and down while operated independently with the switch on its door. However, the driver seat master switch will not control window to go down


Not following you completely.
When you say driver side passenger window, you mean the driver side rear window ?
The window motors get power thru a power window control unit and thru the driver master switch.
You'll need a shop manual with the wiring diagrams to track down the problem.

Feb 27, 2013 | 2005 Honda Pilot

1 Answer

1993 Bighorn Passenger window not working


There could be a lock controller somewhere that is not working.
I don't have a wiring diagram for your truck.

Generally, the power window motors are grounded thru the doors, or the switches provide ground. In your case the motors are probably grounded thru the doors.
The master switch "overrides" the door switch so you have extra wires that do the same thing. The E wire probably gives the door switch power and the A and C are up and down. The B and D are override circuits from the master that bypass the door switch.
Sometimes the motor is grounded thru the switch then thru the door.

Jun 28, 2012 | Isuzu Trooper Cars & Trucks

1 Answer

Passenger side window on 2004 free star,quit working


take the inner door panel off, then jumper 12 volts to the motor connection, ( the one leading to the motor once disconnected ) to see if the motor even still works, if you hook the wires up backwards, no problem, Just reverse them to make it travel the other direction. if you find that the motor to the window works, back track to the switch, make sure its getting power with a meter or 12 volts test light, if it is,, push the switch to make sure its crossing through the switch supplying 12 volts to both sides, ( these switches are a normal pass through 12 volt switch, the only difference is the last 2 wires leading to the door side, flip flop, which makes the window go up or down) if you have voltage to and through the switch,, your window should work, ( assuming the motor checked out ok ) if wither of these 2 things doesn't check out good, replace them,, ( motor or switch) if you find that the switch isn't getting power, trace it back towards the drivers side switches,, and check the window switch lock, if thats shorted none of the other windows will work, and it would need to be replaced,

Sep 26, 2011 | Ford Freestar Cars & Trucks

1 Answer

Power windows: passenger window does not go up or down, checked the fuses under the steering wheel column on the driver side and the passenger side. switched the fuses from the side that doesn't work...


Switching Fuses proved nothing

Don't have a volt meter ?

Did you check out any of the window switches ?

If not the switch, then door panel comes off & you
test the motor

Aug 09, 2011 | 2005 Chevrolet Silverado

1 Answer

My passenger window on my 2004 chevy malibu will not go up. both switches from the driver's side and the passenger's side "up" switch does not work


i believe that there is also a window switch on the drivers side that has a x marked on it, if so, push in this button, it could be in the position to prevent your passenger window from going up or down. this i believe is a safety factor, from the corporation. if after checking the button that i mentioned, and if the window still doesn't work, then check your fuses and relays, under the hood, in a black box, located on the drivers side.

Jun 24, 2011 | 2004 Chevrolet Malibu

1 Answer

I have a 2009 dodge avenger that the front passenger window goes down but it doesnt go back up. I checked power at the motor & had power going both up & down. I thought it was the motor but I...


It may be a bad Power Window Switch, if the Power Window Motor goes up and down when you ran power leads to it but doesn't work with the switch, than the switch is bad. Replace the power window switch and it should work fine.

May 04, 2011 | Dodge Avenger Cars & Trucks

1 Answer

Rear side windows


This may be just a case of inadvertently hitting the window lock out n th driver door window switch by mistake. Check that first. Here's some background on window operation

Principles of Operation
The driver power window regulator motor is controlled directly by the master window/door lock/unlock switch (and its integrated "auto down" module). Power is supplied to the power window relay and the master window/door lock/unlock switch, and the passenger power window switch when the SEC/timer module grounds the coil side of the power window relay. The SEC/timer module will ground this relay when the ignition is in the ON position and will remain energized for approximately 15 minutes or until the driver or passenger door is opened.
The driver power window regulator motor is a reversible motor that is operated by applying power and ground to the motor leads to lower the window, and then reversing polarity on those leads to raise the window.
The passenger power window regulator motor is controlled directly by the passenger power window switch and can also be controlled by the master window/door lock/unlock switch. Power is supplied to the power window relay and the master window/door lock/unlock switch, and the passenger power window switch when the SEC/timer module grounds the coil side of the power window relay. The SEC/timer module will ground this relay when the ignition is in the ON position and will remain energized for approximately 15 minutes or until the driver or passenger door is opened.
The passenger power window regulator motor is a reversible motor, which is operated by applying power and ground to the motor leads to lower the window, and then reversing polarity on those leads to raise the window.
The power rear quarter glass is also directly controlled by the master window/door lock/unlock switch. The power rear quarter glass power latches also utilize reversible motors. The power rear quarter glass power latches are operated by applying power and ground to the motor leads to open the window, and then reversing polarity on those same leads to close the window.
Symptom Chart Condition Possible Sources Action
  • All windows are inoperative
  • BJB Fuse:
    • F20.
  • Circuit.
  • Power window relay.
  • Front door power window switch.
  • GO to Pinpoint Test A .
  • Single power window is inoperative
  • Front door power window switch.
  • Front door power window regulator.
  • Circuit.
  • Driver door power window switch.
  • GO to Pinpoint Test B .
  • Vent power window is inoperative — quarter window glass power latch
  • Circuit.
  • Quarter window glass switch.
  • Quarter window glass power latch.
  • GO to Pinpoint Test C .
  • The one touch down feature is inoperative
  • Master window regulator and door lock switch.
  • INSTALL a new master window/door lock/unlock switch. REFER to Switch—Master Window Door Lock/Unlock .
  • The back window will not defrost
  • CJB Fuses:
    • F30 (10A).
    • F32 (20A).
    • F34 (20A).
  • BJB Fuse:
    • F27 (45A)
  • Circuit.
  • Heated back window switch.
  • SEC/timer module.
  • Rear window defrost relay.
  • GO to Pinpoint Test D .
  • The back window defrost will not shut off automatically
  • SEC/timer module.
  • Circuit.
  • Rear window defrost relay.
  • GO to Pinpoint Test E .

Jan 28, 2009 | 1999 Mercury Villager

Not finding what you are looking for?
2007 Dodge Grand Caravan SXT Minivan Logo

512 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...