Question about Chevrolet S 10

1 Answer

Turn left on need to force turn, but right have to force ; 94' s-10 4 x 4

Posted by on

  • 1 more comment 
  • tonyslice Sep 03, 2008

    wondering could it be the the steering knuckle bushing

  • Coss May 11, 2010

    Unknown, my question was that I did not understand your original question.

    "turn left on need to force turn, but right have to force"



    Turn left need to force turn, but have to force right turns also?

    That's what I was asking.



    Has the truck been getting worse, or did it just happen?

    Were you off roading recently? Or have it hit like a curb, or big pothole?

    And what do you mean by force?

  • Coss May 11, 2010

    What?

    Could you please explain that a little better.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 70,387 Answers

You may have a steering rack/box problem, they fail this way.

Posted on Sep 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Key wont turn


try turning the steering wheel hard over left or right (both) while trying to turn the key with the normal amount of force. (never force the key)
most likely, it is just the steering wheel lock stopping the key from rolling forward.

Dec 30, 2012 | 2001 Land Rover Discovery Series II

1 Answer

Left turn signal pops fuse on infiniti


Check front and rear lights to see if the wiring is arcing to the turn signal on the left side of the car. This is the best guess as it's simply a wiring problem and nothing else, as there is too much current being forced through the turn signal when the headlights are on. Headlights draw much higher current than the intermittant turn signals and therefore pops the fuse.

Mar 02, 2012 | 2011 Hyundai i30

2 Answers

Key won't turn and steering is lock on a 1990 Oldsmobile Calais?


Try to wiggle the steering wheel as you turn the key, the wheel may have some force on the lock so turn wheel to the right and try to turn key then turn left and try the key again. if this doesnt work then the ignition is worn and you will need to wiggle the key to get it to start also try to spary a little wd40 in the ignition key hole and work the key inside the ignition.

Dec 19, 2010 | 1990 Oldsmobile Cutlass Calais

1 Answer

Can not turn the key to start the car


Some times the the steering wheel is turned and the locking pin will jam as the weight of the car or truck will try to force the wheel back to being straight. Turn the wheel left or right with force as you turn the key....

Nov 28, 2010 | Saturn SL Cars & Trucks

2 Answers

A 2002 ford Focus with the steer locked and can't start, tried turning the wheels to unlock but it still wont release. help Al


Use all the force you can muster to turn the wheel to the left while trying to turn the key. If that doesn't work, try doing the same thing, just turn it to the right. Sometimes the steering wheel lock pin can be stubborn. also **** it to the left and right really hard when trying the key. It also helps to pick the front of the car up with a jack when doing this.

Aug 15, 2010 | Ford Focus Cars & Trucks

1 Answer

How do you get a stearing colum unlock and the


hi if the problem is that the lock has locked and wont free when you try and turn the ignition on then what you should try is turning the steering wheel from left to right as hard as you can whilst you try turning the key, the problem is usually that the lock is under pressure from the tyres trying to turn the steering wheel so with this pressure on the lock the key just wont turn so you need to try and release this pressure so that the key will turn and unlock the lock.

so hold the steering wheel tight and turn it left using a bit of pressure whilst you keep trying to turn the key dont hold the key in the same possition as this wont free the lock keep turning the key on and off so that it resets and this should then allow the lock to free and you should be able to start your car, if turning the steering wheel left dont work then try right and repeat with the key on and off until the lock is off and the steering is free.

now it is going to be tight so you will need some force to turn the steering wheel as the force from the tyres will be quite alot so you will need to use force to work the steering wheel left and right whilst turning the key.

now if this still dont work then this will either mean you have a problem with the key or the actual ignition barrel has got a fault if this is the case then your going to need to get a new igniton barrel, the part the key goes into before the lock will free itself, all you need to do to remove the barrel is to remove the cover from the steering wheel surround and then you will see how the barrel comes out of its surround but dont do this until you have a new lock in case you forget how you got it apart.

the chances are the lock is just stuck and working the steering wheel left then right as far as you can will free it up if it dont then you can also try jacking the 2 front wheels off the floor like put the car on stands then try turning the steering left and right to unlock the ignition doing it this way releases the pressure from the tyres and should make it easier to unlock the steering.

let me know how you get on or if you need further assistance ok

May 23, 2010 | 1996 GMC Jimmy

3 Answers

The sterring wheel is in locked position and the ignition wont turn


"Jiggle" your steering wheel to the left and right while trying to turn the key forward.

Mar 18, 2010 | 2002 Jeep Grand Cherokee

1 Answer

Vibration on left side in front


Could be a wheel bearing. If you notice it more when you make a hard right turn (ie more force is applied to the left front wheel while make a right turn) then it is def a wheel bearing.

Feb 15, 2010 | 2004 Hyundai Santa Fe

2 Answers

Key won't turn the ignition switch in 1999 Saturn SL1


Turn your steering wheel to allow the ignition to fully unlock while turning the key.

Feb 08, 2009 | 1999 Saturn SL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...