Question about 1993 Toyota Paseo

1 Answer

Timing need to know how to set the timing. Is it the same as a tercel? If it is ....How? Thankx

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 2,122 Answers

Hi Mart123,
The ignition timing for most Toyota's is set at 10 degrees before TDC....To be able to set it, you'll need to open the diagnostic socket, which you'll find inside the engine compartment....Make up a bridge....(a piece of wire which should have a connector on each end....but you can use a wire without the connector if you want to.....Just make sure that there are no strands which can short out when you plug it in)....you'll see a directory of the available connections on the inside of the lid of the diagnostic plug housing....Bridge between 'T' and 'E1'....this will give you the on board diagnostic read out fr and allow the adjustment of the ignition timing....
om the engine check light from the instrument panel.....To set the timing, mark the notch on the crank shaft pulley and it's also useful to mark the 10 degree's on the scale.... use a strobe light and run the engine at idle speed ad then set....

Best regards Johngee10

Posted on Sep 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Camshaft timin marks position diagram of a toyota tercel 95


what engines, there are 5 engines, in 1995
nobody can help you unless. you tell engine class and if clever, country.

Feb 09, 2014 | 1995 Toyota Tercel

1 Answer

I replaced the head on my tercel but have never adjusted lifters and cant seem to find it in the book if you could let me know how


If it's not in the haynes manual you will need a factory workshop manual OR google tercel froums, the members there may have a procedure for the initial valve clearance lash, of course being hydralic lifters you would only have to do this once. HOWEVER if s professional shop rebuilt the head then the clearances should already be set by them.

Mar 30, 2010 | 1992 Toyota Tercel

1 Answer

WHAT TIMING MARKS DO I USE FOR 1986 TERCEL 3AC TIMING BELT REPLACEMENT


CLICK on the following LINK. It has the Timng Mark(s) Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1986/make/toyota/model/tercel/1986_toyota_tercel_timing_belt_diagram_marks.htm

Feb 28, 2010 | 1986 Toyota Tercel

1 Answer

Timing chain for 95 toyota tercel 1.5 i need to know how to adjust it.


There's a lot of things to consider in adjusting the timing chain.Under the present situation, you need to have an electronic timing set or the mechanical timing light. Feeler gage to adjust valve clearances of your
engine. You need to buy these necessary equipments before you can
adjust the timing chain. The cost of buying these equipments maybe
more than the cost of having your car serviced by qualified mechanics.
So allow me to suggest that you bring your car at the service center,
wherein you can claim a service warranty.

Oct 14, 2009 | 1995 Toyota Tercel

1 Answer

1999 Tercel. Timing belt/water pump interval change?


Hello tinaromano1: The factory specification are to replace the belt every 90,000 miles in severe service. I would recommend to replace at 90,000 no matter what the service would be. Keep in mind should the belt break there is always a chance engine damage may occur. Should you need further help just ask. Thank You for using FixYa. Roger

Apr 15, 2009 | 1998 Toyota Tercel

1 Answer

Car will not stay running


Hi there!

ignition timing problem or IDLE KNOB OR SCREW set too low.

you'll need to tune it. and set the idle a little bit higer.

-hope this helps
levibit

Mar 19, 2009 | 1991 Toyota Tercel

1 Answer

Want to know how to take engine and tranmission out for a 94 tercel


I have done this several times and even put a different motor in my Tercel.. We need a better way to communicate the info if you want to take on the job.

Feb 20, 2009 | 1994 Toyota Tercel

1 Answer

Need to know what tourque for the valve cover bolts, 97 tercel


10 foot/pounds. Hint from experience, change the gasket.

Dec 04, 2008 | 1997 Toyota Tercel

1 Answer

I need to know timing alignment mark to align camshaft on 91 Toyota Tercel with SOHC 3E engine.


the camshaft has a pin on the pulley side that should be at the 12:00 position and the #1 piston valves should all be closed.

Jul 28, 2008 | 1987 Toyota Tercel Liftback

1 Answer

1.5 Litre engine timing 1997 Toyota Tercel


compre un tercel 1997 nesesito saver si biene con cierre centralisado y alarma, poeque veo los suich. pero nada funciona

Jul 13, 2008 | 1997 Toyota Tercel

Not finding what you are looking for?
1993 Toyota Paseo Logo

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...