An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: off track window
Complete unit change iam afraid has to be changed panel does come off its held in with mastic just prise it with screwdriver and keep a constant pulling pressure and an old knife to cut through the mastic
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If it is off track just take the inner door panel off and put it back on track. if that don't work replace the broken window regulator and check the window motor to see if it is still good. replace if necessary .
I take it must be a convertible? Open the roof and remove the rear seat pad and back rest. You'll see the rear quarter panel trim is one piece plastic! Remove the screws holding it in place and lift it up and lay it aside with the seatbelt extended. Unbolt, unplug and remove the speaker. There are 4 bolts that hold in the rear window lifter assembly, loosen the bolts and lift out the entire assembly and then correct the window problem! I advise you though to take it to a dealer as it is a very complicated operation that requires correct adjustments of the lifter assembly because the adjustments will definitely be out for the window to come off its position!!
On the inside trim, you can remove screws that are by the door handle,
arm rest, under door and side of door and then gently pull back on the
panel as there will also be retaining clips attached and you don't want
to break them. You'll need to lift the door panel upwards in order to
get it off the window ledge. Then you'll need to manipulate the panel
and disconnect the door handle linkage from the door handle and
disconnect the wiring for your controls. Pull back the weather seal and you can access the window and the track. You may need to purchase some new replacement clips that secure the window onto the track.
if the window is off track the regulator is probably bad. to remove the door panel should be a couple of screws by the inside pull handle and possibly one by the door handle itself also check the bottom of the door for any then just pull it off and lift up to clear latches and remove plastic film to get to inside of the door
got pull the door molding off to get the insides it a pain the ***. Make shure you get the metal ore plastic track that broke of. go dealer what ever the window set in broke ore rusted you need new one. Get year make model part guy pull up the picture put pull the door side molding off inside first see what you need replace. I have done this on my honda civic get ready cut your hands up little stick them little spaces
Seems the window is 'dragging' in it's track or it is OUT-OF-TRACK. Verify that the window is in it's track - if so, find/get some silicon spray and spray it down the front & rear track. See if that does the trick. If you discover the window is OUT-OF-TRACK, you'll need to put it back in its track (or find someone who knows how to do this). If neither of these solutions works, perhaps you should take it into the Hyundai Dealership and have them diagnose the problem.
Remove the upholster on the door panel. then, loosen the bolt of the window mechanism..and also the bolt of the track of the window, so you can put the window back on its track. then, you can stabilize it by looking for the right adjustment of the mechanism.