Its hard to change gears and it grinds when you do. it goes on its own. when i put it in reverse it sounds and feels like the *** end is dropping out. now when i put it in reverse it stalls. i just replaced the brake line and master cylinder
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
is this a manual transmission ? You may have a problem with the clutch plates, clutch cable or if hydraulic the clutch master cyclinder .
The clutch is two plates of metal that rub together to allow the gears to move the car. When you push the pedal in the plates come apart to allow you to change the gears. If the clutch plates wear out or do not touch the gear box will not go into gear. It will feel like something is stopping the gear from going in. It could also be a syncromesh problem. I have a car that intermittantly does not go into reverse but I put the clutch pedal out and back in and it goes away,
The 3rd Gear Synchro is worn or damaged, which is why it grinds when you try to upshift or downshift into 3rd gear. When it goes out completely you will have a very hard time shifting into 3rd gear, since the Synchro lines up the gears to make shifts smooth and easy.
When it is hard to go into gear or grinding when going into gear is an indication of worn synchronizers. The only solution is to take it to a mechanic that specializes in transmissions and having the synchronizers replaced. Sometimes a weak clutch and clutch plate can make it hard to go into the lower gears, you may want to examine these first.
If you can select another gear with no grinding and clutch feels normal likely either the reverse synchro is worn out or an internal shift fork is worn...either way, trans needs to come out and be opened up to check. Can you put it into reverse with the engine off?
stop shifting so hard. your reverse gear is the same exact gear as your first, so if you shift hard and grind that gear a little then reverse will be harder to get into. you probably need your transmission rebuilt the harder your engine has to work the more its going to bogg down
i have also hyundai 2001 model.my car when i try to put D(drive) it never move but when i chang to no 3 it moves.also when i try to chang for R it becoming verrry noisy.also when i am driving car that indicaiting enging check light after some time it goes and again wwill come.please advice me witch steap i have to follow to make this all problems