Question about 1990 Toyota Land Cruiser

1 Answer

Haed lights low beam works switch to high beam spot lights work power at all 4 lights but no high beam. high beam indicator light on dash works

Posted by on

  • freaky69 Sep 03, 2008

    we know which lights are what. the low beam works but only the spotties will work on high

  • freaky69 Sep 03, 2008

    must be a broken wire in the loom. ran a new one...all good

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,027 Answers

All 4 lights is HIGH beam. The 2 that come on in 'LOW' are the low beams.

Posted on Sep 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Left operating headlight not working


the switch supplies power to the relays that switch on the lights according to the position you have it at
so on high beam there will be 2 high beam lights working
on low beam there will be 2 low beam lights working
back to passing lights or flashing head lights , both beams will work so the switch is the last item to consider
Now with only one side beam not working it comes back to the ground on that light for that bulb
remember that electricity follows the path of least resistance so it the ground is bad the current will ground out through another point including a light which will switch that light off or make it not work
remember the brakes light that flask when an indicator is used --same thing

Jan 24, 2016 | 2000 Nissan Maxima

2 Answers

1999 Toyota Camry . Low beams work, but no high beam.


I would guess the switch on the steering column
is worn out,thus no high beam feature

That switch & that part of the lighting system has to be tested

Best if you have wiring diagrams & electrical skills

As with almost all folks that come to any web site, I assume
everyone ends up at a repair shop,because no one says otherwise

May 10, 2014 | 1999 Toyota Camry

1 Answer

Is my 2007 Lincoln Navigator (HID headlights) equipped with HIGH BEAMS? If so - they don't seem to work. Allow me to explain; 1. The headlights come on automatically in low light conditions. 2. The...


First of all are your headlights a double filament type headlight? If yes then I would suspect that a power wire to the high beams is broken or shorted. If your high beams are a separate set of lights from your regulars running lights then either the high beams headlights are missing. or has a broken power wire or shorted or...You could check the fuse box under your dash and under the hood of the car to see if you have a fuse for the high beam lights.

Oct 28, 2013 | Cars & Trucks

1 Answer

High beam indicator comes on with fog lights


Could your Mazda have daytime running lights? If you checked all fuses, did that include the three in the joint box?

There is an auto light-off control module that is central to all functions you describe. It is assumed that you would only turn on the fog lights with headlights on and set for high beam. If you set the headlight switch to LOW, the module closes the headlight relay to turn on the low beams. If you then turn the headlight switch to HIGH, the module turns on the high beams and allows you to turn on the FOG LIGHT switch, closing the fog light relay and turning on the fog lights. Since this sequence is not working, I suggest checking both high beam lamps as both could be burned out. Other possibilities are a defective headlight switch or the module

Oct 01, 2012 | 2005 Mazda 6

2 Answers

2005 Ford Focus ZX3 SES, the blue high beam indicator in the dash comes on with low beams, and goes off with high beams. The indicator is on at the wrong time! I have tried the following: The turn signal...


It sounds like you are confused about how your headlamp system is supposed to work. The DRL does not run on the High beam circuit, it runs on the low beam circuit. The fog lamps are supposed operate with the park lamps and also with the low beams, not the high beams. From your description, I would say that your system is operating as designed and you are having trouble telling High from Low. (Don't feel bad, that is why high beam indicators were invented in the first place.)

May 08, 2011 | 2005 Ford Focus

1 Answer

I have 2006 grand prix and the bright lights wont come on. I move the blinker lever forward and the low beams stay on but i get the blue bright light on the dash, checked fuses all seem to be okay


do you hear the click of the dimmer switch when you move the lever if you do then the steel rod that goes from the lever to the switch itself is working and the switch is moving from the low beam to high beam circuit.if the blue dash indicator is on them power is coming out of the switch to the dash to operate the light.its possible that the dimmer switch may need to be adjusted a little if you don`t hear the click but moves enough to put the dash light on but not enough to turn the high beams on,that is possibly why the low lights stay on.or you have a bad dimmer switch itself

Mar 08, 2011 | 2006 Pontiac Grand Prix

1 Answer

2001 Toyota Corolla high beam lights are not


Your switch must be working since your indicator is telling you when the high beams are on, so my guess is that your bulbs are faulty. The high beam part. They probably burnt out one at a time, so you didn't notice until the second one went. Change your bulbs, and see if that solves it. If not, let me know.

Jul 23, 2009 | 2001 Toyota Corolla

2 Answers

High beam headligts will not come on + no dash


Sounds like a bad switch to me. If it was a relay,it would not work period.Not to mention, the switch controls the dash lights too.

Jun 22, 2009 | Mazda MX-6 Cars & Trucks

1 Answer

High beam indicator light


MY HIGH BEAM LIGHT IN DASH DOES NOT WORK JEEP tJ

Apr 12, 2009 | 2003 Jeep Wrangler

Not finding what you are looking for?
1990 Toyota Land Cruiser Logo

Related Topics:

594 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...