are you DIY, doing or did this work or others?
your hands? if did, see the HID bulb below?
head light ,
right side, dead (USA right side) ?
in UK passenger is LEFT side. so please say left /right
- low beam
- high beam
- and high beam flaster switch
OR all 3 dead. selections dead.
and all other electric things work and car drives ok.
yes the 2 orange are parking lamps. all sides/corners and ends of car good parking lamps.
off hand using the wrong bulbs not reading the free users guide in the glove box for bulb number
USA answers only (me)
Chrysler maker
this car uses the BCM body brain to run front lamps
and does so using 4 outputs. 2 low and 2 high each side.
some of these cars have
HID lamp options.
and are totally unique, for head lamps! IF TRUE.
standard bulbs are
H3 TYPE. AND ARE NOT HID.
PAGE 406 IN THE USER GUIDE
HID BULBS ARE HIGH VOLTAGE LAMPS.
DO NOT PLAY WITH THOSE, OR GET SHOCKED
AND REQUIRE SPECIAL PARTS TO REPAIR IT.
Same page
On vehicles equipped with High Intensity Dis-
charge Headlights (HID), when the headlights are turned
on there is a blue hue to the lights. This diminishes and
becomes more white after approximately 10 seconds, as
the system charges.
the lost free manual is here by maker
https://vehicleinfo.mopar.com/assets/publications/en-us/Chrysler/2007/Pacifica/1577.pdf
and more
Do not touch the glass of High Intensity Discharge (HID) or halogen bulbs with fingers or other possibly oily surface. Reduced lamp life will result.
HID install 1 step says
Place the igniter on the HID lamp. Do not at this time connect the igniter electrical connector. It will make it unable to twist the igniter to the closed position.
the igniter can be bad.
HID uses D2S bulbs only .
Chrylser p/n
MOPAR 4865941AB
and looks like this.
VERY EXPENSIVE TOO. PARTS.
PARTS PAGE
https://www.rockauto.com/en/catalog/chrysler,2007,pacifica,4.0l+v6,1433518,electrical-bulb+&+socket,headlamp+bulb,11701
halogen low beam
wrong fix must be hid lighting email [email protected] thanks
need better info low beam light passenger side burnt out how to replace 2007 chrysler 300c thanks
Johnjnail: Thank you for your expedient response! I will review what you sent and let you know if I have any further questions! Regards, ED
×