1. Remove the inner fender
2. Disconnect the 3p connector from the front turn signal/side marker light.
3. Turn the bub socket ( 45 degree ), counterclockwise to remove the bulb.
4. Install a new bulb in the reverse order of removal.
1. Use a Phillips-head screwdriver to remove the screw from the top of the fender. (inside the fender, under the hood). 2. Move the side marker light assembly forward until it pops out of the body. 3. Turn the bulb holder one-quarter turn counterclockwise to remove it from the lens. 4. Pull the bulb straight out of its socket.Push the new bulb straight into the socket until it bottoms. 5. Put the bulb holder back into its hole in the lens, and turn it clockwise until it locks. 6. Turn on the parking lights and check that the new bulb is working. 7. Put the side marker assembly back into the body. Push on the front edge until it snaps into place.Install the mounting screw and tighten it securely.
first i wanna say good luck too you..I don't know who dizayn that head light assmebly but it was the stupidist think i ever seen..
My friend 1992 accord had a broken head light and he asked me the favor and i thinked just the headlight why not...
first i had to remove front grill and side marker find one bolt under side marker but it dosent change anything then i figure it out whole think!!!!!
You have to remove whole bumper cover and bracet to remove bottom screws 3 on inside 2 on out side of head light...
i have to spend hours to replace 40 bucks head light..