Tip & How-To about 2000 BMW 7 Series

Tyrecontrol inactive ???

Hi for all ,
i have bmw 740i ,
1) i have message "tyrecontrol inactive"
2)i have message for Brake Light But All The Light Is working fine ?

thanks for all

Posted by on

2000 BMW 7 Series Logo

Related Topics:

Related Questions:

1 Answer

1997 bmw 740i brake lights don't work

Shawnna: I like to start simple so I would pull the lens of the tail light and check and probably replace the light bulbs. Naturally, it could be a short or a fuse problem, but that is the most logical place to start.

May 28, 2015 | 1997 BMW 740il

1 Answer

both of the brake lights on my 97 bmw 740i don't work

are the dash lights still working,if so,first check the bulbs,you can get a test light at autozone for a couple bucks,with the bulb out,test light grounded,have someone step on the brake pedal,touch the test lite probe to one of the contacts inside bulb socket,if it dont work your brake lite switch is out,its located under the dash,maybe on brake pedal lever

Jan 25, 2010 | 1997 BMW 7 Series

1 Answer

1998 BMW 740i - I had a brake light out, replaced it, it won't

check where the wires go from the inside of the body to the out around the gromet. I did run into one that the wires rubbed. Also if the light are on the trunk lid check where they go through the trunk latch.

Sep 14, 2009 | 2006 BMW 750Li

1 Answer

tyrecontrol inactive ???

RDC (Reifen Druck Control)
You have a button next to [DSC] that say [RDC], hold that button until the display is 100% filled eith "XXXXXXXXXXXX" and after that it will say "Tire Pressure Set". Or check in your manual for details abouat RDC.

Hope this helps, good luck!

Jun 24, 2008 | 2000 BMW 7 Series

Not finding what you are looking for?

1,446 people viewed this tip

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers


Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions