Tip & How-To about 2007 Jeep Wrangler Unlimited Rubicon 2 Doors

2008 jeep wrangler hood problem

I just bought a 2008 jeep wrangler and my hood is lifting 2 to 3 inches off the frame when I'm driving on the highway in wind speeds over 15 to 20 mph. I've owned two jeep wranglers in the past and I've never had this problem but chrysler keeps telling me this is normal. What's normal about a hood that is lifting off the frame?

Posted by on

2007 Jeep Wrangler Unlimited Rubicon 2 Doors Logo

Related Topics:

Related Questions:

1 Answer

why is my 2005 jeep wrangler overheating while driving highway speeds and cool at an idle. Even after replacing the water pump, the thermostat, and the radiator????

If this vehicle has a clutch type fan it is probably the problem, good at idle but once the rpm's speed up it does not keep up with engine speed, thats why it heats up at highway speed.
Difficult to diagnose because you cant always tell if it is spinning as fast as it is supposed to be.

I’m happy to assist further over the phone at https://www.6ya.com/expert/gregg_78ecbb34e27be215

Nov 05, 2009 | 2005 Jeep Wrangler

1 Answer

just bought 08 wrangler unlimited ,with oversized tires and lift.When cornering jeep anti roll engages,even at slow to moderate speeds.can this be adjusted Thanks LEN

yes I have a few questions for you and you didnt pay for the fixya service. you can call me at 408-568-2963 or email me at rogrrabbit@aol.com. There are many issues with the lifts on these JKs I have a 08 Rubi. I can help. Roger

Oct 06, 2009 | 2008 Jeep Wrangler

2 Answers

2001 Jeep Wrangler 4" suspension lift

Jeep's transfer case output is poor for lifts over 2-3 inches. A transfer case drop should have come with your 4 inch lift, but if not you should be able to purchase it from quadratec.com or 4wd.com. You shouldn't drop it much more than an inch, since engine will be rotated into your firewall, besides, transfer case drop reduces ground clearance. The spacers go between your frame and you transfer case skid plate. A transfer case shift linkage bracket is also required to maintain its alignment. Then if it starts making noise, the dealer has a TSB parts kit to fix that. A better solution is a Slip Yoke Eliminator and extended rear driveshaft, but you'd be looking at about $450 and a days worth of work. Good luck.

Mar 20, 2009 | 2006 Jeep Wrangler

Not finding what you are looking for?

2,540 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions