Tip & How-To about Chevrolet Suburban 1500

A problem that happened a the assembly plant.

1999 suburbans have a wire that is pinched in the drivers side pillar. If it is a ground, all kinds of havic can be created.

Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

1 Answer

2003 suburban back driver door window doesnt work


Check the wiring between pillar post and the door they my be broken, if they are okay at the rear door check the wires at the drivers door as all the wires feed through the master switch.

Mar 02, 2013 | 2003 Chevrolet Suburban 1500

1 Answer

the interior lights will not come on when you open either front door but work fine on the rear doors.


check the pin switches where the front doors meet the B-pillar they get stuck from getting slightly bent from regular use or getting gunk in them look at the one on the drivers door first you may need to remove the plastic cover on the inside of the B-pillar to get to the wiring unplug it and shut the door then open the passenger door and see if the lights come on if they do then the driver side switch is bad if not do the same thing on the passenger side.If the lights start working then the one on the passenger side is bad.
good luck.

Jan 02, 2010 | 1999 GMC Suburban

2 Answers

no tail light 99 suburban


ck wires not sockets sounds like ground problems

Sep 23, 2008 | 1999 Chevrolet Suburban

Not finding what you are looking for?

418 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Loading...