Tip & How-To about Buick Century
O2 sensor needs to be replaced when you get low gas mileage in car.
The procedure to replace is as follows: ----
1) The oxygen sensor is located under the car.
2) Put the car on jack stands on the rack, this will give you proper sensor location in the car.
3) The sensor has to be turned a bit then it can be easily removed.
4) Most of the times the O2 sensor comes out very easily but if its bit hard to remove it then you can use "FREEZE spray" to make it gets loose.
5) The spray will make it come out easily.
6) When the O2 sensor is getting removed, some of the wiring's will also come out.
7) Before removing the O2 sensor, take the note of the wiring's and the position of wiring so while inserting new O2 sensor you don't get confused.
8) Now after you remove the old faulty O2 sensor out. Carefully insert new O2 sensor in same position.
9) And reverse/refit all the wires / parts which you removed while replacing the old O2 sensor.
This will help. Thanks.
Posted by charlymont... on
2,587 people viewed this tip
Usually answered in minutes!