Tip & How-To about Dodge Ram 1500

Your Dodge Ram 1500 turns over but won't start?

This is a common problem with Dodge.. Most of the time its your crank position sensor . $89 part. and about $100 labor fee. 1 1/2 hours to do says the book. Or could be fuel pump out or to weak so not enough psi.

Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

2 Answers

chevy trying to charge me $400 to replace and program my crank sensor the labor $200 and the part $200 is that about right


To replace crankshaft position sensor you would need to pull the harmonic balancer , that takes a puller . Special tool > About one hour an a half . replacing sensor about half hour . This is depending on engine size V-6 V-8 http://my.cardone.com/techdocs/PT_%2070-77-0003.pdf A new crank sensor gm parts direct on the internet $42.00 . Here in PA the local Chevy dealers labor rate is $86.00 an hour .Pep boys labor rate is $115.00

Mar 14, 2016 | Cars & Trucks

1 Answer

how to replace crankshaft sensor on 350xg hyundai 2005


If they only replace the crank sensor the timing belt will be removed along with the other belts on the front of the engine so if any of the belts are worn it is a good time to replace them. With a $1275 estimate I suspect that other work is to be performed at the same time though.



The sensor list price is $80 and the time required to replace is 3.0 hours so at $100 per hour labor and 1 hour to diagnose it the charge should be $480 plus shop fees and taxes.

Jul 22, 2012 | Hyundai XG350 Cars & Trucks

1 Answer

How much can i expect to pay to have a fuel level sensor replaced in 2006 xterra


To replace the fuel pump calls for 2 hours of labor time.

So about 160 dollars (depending on labor time) plus cost of the part plus the shop supply fee.

Jul 02, 2010 | Cars & Trucks

1 Answer

can i have an estimate on how much you think it would cost to fix a crank sensor in a 1997 aurora?? PLEASE RESPOND ASAP THANKS.....


The labor time to change the crank position sensor is : 1.0 hour and .1 add for locking wheel covers for a total of 1.1
Plus im sure there is some diagnose time.
Normally for my shop it would probably be .5 diag time. but not more than an hour.

(:DK

Oct 21, 2009 | 2001 Oldsmobile Aurora

2 Answers

1989 jeep cherokee 4.0 cuts without warning or when you let off gas pedal


check the crank position sensor and the throttle position sensor

Oct 15, 2009 | 1989 Jeep Cherokee

Not finding what you are looking for?

1,465 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Loading...