Tip & How-To about Chevrolet 1500

Chevy truck way to reset oil service indicator.

After changing oil on 99 and newer Chevy truck and SUV, there will be your oil change light flashing. just sit in vehicle close door, put seat belt on then turn key on but don't start. then withing 10 sec push and release gas pedal fully then message will appear saying oil change indicator reset. there you go.

Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

2 Answers

saturn warning lights


Thats mean your oil line needed to be change.

Aug 27, 2014 | 2008 Saturn VUE

1 Answer

How do i reset the change oil light?


Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three times within five seconds. If the CHANGE OIL SOON indicator flashes two times, the system is resetting. Turn the key off after the the light has finished flashing, then start the vehicle. If the CHANGE OIL SOON indictor comes back on, the engine oil life monitor has not reset. Repeat the procedure again. If the vehicle is equipped with the U20 option code, the vehicle as an oil life low indicator. The oil life low indicator shows an estimate of the oil's remaining useful life. When the oil life index is less than 10 percent, the display will show OIL LIFE LOW. To reset the oil life monitor, press and hold the MODE button until the light appears next to OIL LIFE. Press and hold the trip RESET button until the oil life percentage changes to 99 percent.

Nov 28, 2010 | 2000 Oldsmobile Intrigue

1 Answer

the check engine light keeps coming on and flashing and then goes off on my 93 subaru legacy ive changed the oil sparkplugs air filter everything and it still comes on and also my seat belt light flashes too even when all seat belts on on


hi..

well first of all it means that u have a problem some where on the suv the only way to find the problem is to hook a diagnostic computer and see what the code is u will have to take the car to a shop who works on isuzu and im sure they can tell u what code it is and whats wrong or u can take the suv to advance auto parts and they can hook there machine to it for free and tell u the code good luck

OK, the best action now would be to scan the ecu for any trouble codes that may be stored at this point with a diagnostic computer. this action will describe the issue concerning the check engine light and, it will also direct you to the location of the failed sensor that may be damaged at this time.

In most cases, this light will illuminate if a vital sensor has failed to register a signal for a short time or, if the sensor circuit is open.

thank u
rate me!!

Jul 26, 2009 | 1993 Subaru Legacy

1 Answer

02 Kia Optima-flashing inside dash lights when starting vehicle


you have short between the radio and the interior light.
you need to get a diagram of the electric system and trace it out.
if you pull the fuse for the interior light, and run the CD what happen?

Dec 01, 2008 | 2002 Kia Optima

Not finding what you are looking for?

499 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Loading...