Tip & How-To about Ford F-150

Should I worry about my vehicle's alignment

Alignment refers to the way your car's wheels are positioned. Your wheels should be parallel and facing forward.

How does alignment affect my vehicle?
When your wheels are properly aligned, you'll get better gas mileage, your tires will last longer, steering will be easier, and your ride will be smoother and safer.

What could go wrong with my alignment?
Several factors could contribute to a shift in alignment including old, worn-out components including Ball Joints, Control arm bushings, and poor road conditions, resulting in a few different problems including Camber, Toe and Caster, and if any of these problems develop, they will take a toll on your vehicle's tires, performance and manageability. Worn out shocks and struts can also be a serious problem with un-even tire wear.


Camber
The wheels are tilted, either inward or outward. This will create pulling and tire wear.


Toe
A change in the distance between the front and back of the front or rear tires. This will wear on the tires, too.


Caster
A backward or forward tilt at the top of the wheel's spindle support arm. This will cause either loose or difficult steering.



If any of these problems develop, they will begin to take their toll on your car's tires and performance, as well as steering

How will I recognize a problem with my alignment?
Check your steering wheel when you're driving. Does it stay straight? Does it vibrate? When you are traveling along a straight road, does your vehicle pull to one side? Is your steering loose, or difficult to control? Have you noticed uneven tire wear?


Check your tires periodically. A number of different things can affect your tires - from alignment to suspension components.
As a general rule, you should have your alignment and related components, such as ball joints, control arm bushings, checked every 10,000 miles or once a year, and there are three types of alignment jobs with a good-better-best approach.

GOOD
Two-wheel geometric centerline alignment.
This adjusts the toe on your front wheels only. This will work only if your rear wheels are properly aligned. (Used mostly on trucks and older rear-wheel drive cars).

BETTER
Four-wheel thrust line alignment.
This aligns the front wheels to the rear-wheel alignment.

BEST
Complete four-wheel thrust line alignment.
This is the optimal approach: aligning all wheels straight ahead and parallel.

After a thorough review of your alignment, your The Wright Import technician will present you with the findings and all of your options before beginning any work on your vehicle.

What is a wheel alignment? How does it effect handling and tire wear? When should I do an alignment? What causes alignments to go out? How would I know if my alignment is out?

A wheel alignment is nothing more than setting the angle of the hub/wheel so it tracks in the right direction. Most vehicles have four-wheel alignments, meaning each of the four wheels is separately aligned. Your basic alignment consists of three angles: camber, caster and toe-in. Camber is the tilt of the tire when viewed from the front of the car. Positive camber means the top of the tire is tilted away from the car. Negative camber means the top is tilted in. Camber has a lot to do with cornering performance. Too much negative camber will wear the inside of the tires prematurely. Too much positive camber will wear the outside tread.

Caster is the inclination of the front spindle. Picture the angle of the forks on a bike top to bottom. When the caster is out, it creates a pull or wandering condition and sometimes a slow responding steering wheel. Toe-in is measured in inches or degrees. Viewing from the front of the car, it is the difference between the front and rear center-line of the tire. Toe-in means the fronts of the tires are closer together. Toe-out means, the fronts of the tires are farther apart. Toe-in or out has the most effect on tire wear.

When your car is out of alignment, the tires will wear prematurely. In some extreme cases, new tires will be gone within 500 miles. At the price of tires, especially high performance tires with soft compounds, you want to keep your vehicle in alignment as long as possible. Other symptoms of an out-of-alignment car are poor handling, pulling to one side, or wandering from side-to-side. An alignment will also affect the steering wheel response and how quickly it returns to the center.

Your vehicle's alignment should be checked every 10,000 to 12,000 miles. Any harsh impact such as potholes, curbs, objects in the road, or the damage of an accident, should prompt you to have your alignment checked. If you do any modifications to your suspension, raising or lowering your car, that will affect the alignment angles. Even changing the tire size will effect the alignment. Loose, worn or bent suspension parts such as ball joints, springs, bushings, and control arms will have an adverse affect on your alignment, too. In most cases you do not know if your alignment is out. The best way to check it is with a precision alignment machine. Laser optics combined with a computer allow for the most accuracy in alignment readings.

Remember you are aligning the hub of your vehicle. Check to see if the alignment shop or dealer has equipment that attaches to the hub, not the wheel. Many independent shops that do alignments have a specialty tool called "Tru Align" that attaches to the hub. This will make for a much more accurate alignment with the added bonus of not damaging the delicate finish on your wheels.

There is a lot more to suspension alignment, especially if you push your vehicle on the track. The modifications you make on your suspension are just the beginning. Once you start down this road you will be concerned with things like bump steer, weighting (vertical load), pre-loading, tire traction versus tire load, and more. Now you're thinking under-steer, over-steer, tire compound, sway bar design, and other topics that can be covered in a later article. For now, just remember to have your vehicle aligned every 10,000 to 12,000 miles in normal driving conditions.
If you accidentally hit a curb, or drive through a nasty pothole or other road obstruction, that would be a cue to have your car's alignment checked more often. Proper alignment is good for your car. It will save unnecessary wear on your tires. It will ensure that your vehicle is giving you the handling the factory designed the car to have. And, most importantly, a properly aligned car is safer and more fun to drive. Have your alignment, ball joints and suspension checked regularly checked regularly

Posted by on

Cars & Trucks Logo

Related Topics:

Related Questions:

1 Answer

How to Diagnose an Alignment Problem?


tire wear is a method of diagnosing an alignment problem
abnormal wear on the insides or out sides of the tread indicates a problem with toe in/out and or camber settings
wheel wobble at speed ( 20 mph up ) indicates castor setting problems
steering wheel not self centering after turns indicates castor settings
steering wandering on the road indicates worn steering /ball joints and or alignment settings out
car running sideways ( crabbing)on the road indicates worn rear suspension parts , broken center bolts on leaf springs ,and rear alignment problems which will affect front end alignment
this is indicated by the steering wheel position off center when driving straight ahead

Oct 14, 2016 | Cars & Trucks

1 Answer

What does it mean when your front wheels are not parallel? Driver side points straight forward and the front left points a little to the right.


It means that your front end is out of alignment. The front wheels should be adjusted so that both point slightly inwards at the front of the car when the steering wheel is straight. This is referred to as "toe-in." The reason why cars and trucks are aligned with toe-in is because the wheels go to a straight position when traveling on a highway due to the road resistance pushing the tires back. What you have is a "toe-out" condition which will cause the tires to wear faster at the side adjacent to the back of the wheels. Have your car aligned to avoid such uneven wear.

Feb 22, 2015 | 2002 Chevrolet Impala

1 Answer

What is the "right way" to adjust rear toe/alignment


take it to a shop that does alignments and get it inspected, sometimes an experanced eye will see something you might not. then have a 4 wheel alignment done. this is the only right way to do this.

Aug 17, 2014 | 2002 Oldsmobile Intrigue

1 Answer

how do you adjust rear end toe


replace anything that was bent and then have the rear end alignment done at a wheel alignment specialist shop
any specialist shop when doing a front alignment should always check the rear first as it controls the accuracy of the front job

Aug 17, 2014 | 2002 Oldsmobile Intrigue

Not finding what you are looking for?

957 people viewed this tip

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Loading...